8.51 (Bitwig 3.1+)

• Requires Bitwig 3.1+.
• Launchkey Mini Mk3
  • New: Display info if the Metronome was toggled on/off and the drum sequencer page was changed
  • Fixed: The pad rows of the drum configuration mode were flipped
• Maschine Mikro Mk3
  • Fixed: Displayed Parameter names of row 3 and 4 were flipped

8.50 (Bitwig 3.1+)

• Requires Bitwig 3.1+.
  • All devices use the new Hardware API
• Removed support for Arturia Beatstep Pro due to too much limitations (use Generic Flexi instead).
• AutoColor
  • Fixed: Auto coloring did not work on added tracks which had the same name as the track which was before at that position.
• APC40
  • New: Changed direction of session-clip/scene scrolling
• Mackie HUI
  • New: Added support for icon Master fader extension
  • New: Insert buttons select track
  • New: Added (HUI QICK PUNCH) - Toggle Punch In
  • New: Added (HUI IN) - Toggle Punch In
  • New: Added (HUI OUT) - Toggle Punch Out
  • New: Added (HUI ON LINE) - Toggle Audio Engine on/off for current project
  • New: Added (HUI RETURN TO ZERO) - Return the play cursor to the start of the arranger
  • New: Improved unmute/unsolo all tracks
• Native Instruments Kontrol 1
  • New: Improved speed of knobs
  • New: Changed direction of session-clip/scene scrolling
• Launchpad
  • New: Added Poly Sequencer
  • New: Delete + Scene button in Session view deletes the scene
  • New: Shift mode: Enable note repeat and set the note repeat period and length with the pads in the middle
  • New: Sends mode: Display name of sends when selected
  • New: Light buttons brighter when pressed
  • New: Flipped Up/Down button in Device mode
  • New: Changed direction of session-clip/scene scrolling
  • New: Added notification messages to Shift view
  • New: Used several colors in Shift view for easier function identification
  • Fixed: Duplicate did not work on non-pro models
• Maschine Mikro Mk3
  • You need to load the new template into the Maschine (Bitwig.ncc) first
  • New: Use multiple colors on pads
  • New: Added note repeat (long press note view to change settings)
  • New: Pressing the encoder button always toggles between slow/fast value change, except tempo (tap tempo) and browser mode (confirm selection)
• OSC
  • New: The port of the OSC server ("receive on") can be configured again.
  • New: Added commands for note repeat (/vkb_midi/noterepeat/...)
  • New: Added /track/hasParent {0,1}
• Push 1/2
  • New: Added note repeat, long press Repeat button for configuration settings
  • New: Added cue volume and cue mix to Master mode
  • New: Delete + Track button: Delete the track
  • New: Delete + Scene button (in Play, Piano, Drum 64, Session view): Delete the scene
  • New: Delete + pad in scene play mode: Delete the scene
  • New: Added "Clear Mute/Solo" to drum channel details
  • New: The quantize mode now contains the record quantization configuration as well
  • New: More parameters for note editing
  • New: The note insert/edit MIDI channel can be selected in the Track Details mode and in the document settings
  • New: Buttons are lit brighter when pressed
  • New: Automate button is lit orange (instead of red) when Clip automation is displayed
  • New: Improved unmute/unsolo all tracks
  • New: Changed direction of session-clip/scene scrolling
  • New: Scrolling scenes in scene play view scrolls whole 64 scenes
  • New: User page names can be edited in the document settings
  • Fixed: Push 1: Header text in Master mode was missing
  • Fixed: Push 2: Scenes in scene mode were not immediately updated and not in sync Session Scene view.
• SL MkIII
  • New: Changed direction of session-clip/scene scrolling

7.60 (Bitwig 2.4+)

• Requires Bitwig 2.4+.
• Support for Novation Launchpad X
• Support for Novation Launchpad Mini Mk3

7.50 (Bitwig 2.4+)

• Requires Bitwig 2.4+.
• Support for Novation Launchkey Mini Mk3
• Launchpad MkII
  • Fixed: The Play and New functions in Shift mode were switched.
• OSC
  • Fixed: OSC did crash on startup
  • Fixed: Calls to /track/x/clip did not work

7.40 (Bitwig 2.4+)

• New: Improved auto-detect of some devices
• Ableton Push
  • New: Prevent to enter a layer which has no devices, previously the container device was
    selected instead which could be confusing
  • New: Added info to the browser mode about if insert or replace is happending and
    selected track.
  • New: Add device to layer instead of track if a layer mode is active (but there are still
    some Bitwig weirdnesses in that area)
  • New: Access to slot chains of devices
  • New: Added aftertouch processing to Drum and Drum 64 mode.
  • Fixed: Blinking on queued clips did not work
• Launchpad Pro/MkII
  • New: All tracks are displayed (incl. fx and master track)
  • New: Shift-mode can now also be accessed from the Session mode. To access the Bird-Eye
    view of the Session mode long press the Session button.
  • New: Optimized Shift-mode, Scene buttons select (again) the Mix-mode of MkII, they
    have no function on the Pro. First row of buttons select the length of new clips
    on both models.
  • New: Pro: Added aftertouch processing to Drum and Drum 64 mode.
  • Fixed: Blinking on queued clips did not work
  • Fixed: Page Left LED indication in Note and Raindrops Sequencer was not correct.
  • Fixed: Play in Shift mode of MkII did not work (triggered toggle loop instead).
  • Fixed: Mixer-LED on MkII was not lit.
  • Fixed: Play-Layout was not set when first time switching between Session and Play.
  • Fixed: Stop-Clip mode could not be activated on MkII
• Maschine Mikro MkIII
  • New: Show info text when Duplicate is enabled
  • New: Added template with required settings to the resources folder.
  • New: Added flip arranger and clip recording option
• MCU
  • New: Added preset for Behringer X-Touch One
  • New: If device or marker mode is active, do not change track with MCU_SELECT (necessary
    for 1 channel controllers like Behringer X-Touch One)
• Native Instruments Komplete S-MkII, A-series/M32
  • New: You can now set the speed of the knobs in the settings.

7.32 (Bitwig 2.4+)

• Requires Bitwig 2.4+.
• Added a help page for the extension. Help button appears now with each instance.
• MCU
  • New: Added new function key option "Toggle use faders like editing knobs".

7.31 (Bitwig 2.4+)

• Requires Bitwig 2.4+.
• Added new scales
• Beatstep Pro
  • Fixed: Some knobs did not toggle their value
• Mackie HUI
  • Fixed: Crash on startup and shutdown if Display was active

7.30 (Bitwig 2.4+)

• Requires Bitwig 2.4+.
• APCmini
  • Fixed: Sometimes the pad grid was not drawn after startup, since the APCmini is slow to be ready for receiving commands.
• APC40mkI/mkII, APCmini, Launchpad MkII/Pro, Novation SL, Push
  • Fixed: Deactivate all sequencers if no clip is selected. This caused weird effects if
    the grid resolution of the sequencer was changed with no clip selected and then a clip
    was selected.
• Native Instruments Komplete S-MkII, A-series/M32
  • New: The extension is now split up into two. One for the S-series and one for the A-series/M32. You need to add your Kontrol device again.
• Novation SLMkIII
  • New: Notification messages are also displayed on the SL display
  • New: Firmware version is displayed on startup
• Push
  • Fixed: Display a message if no clip is selected in clip mode
  • Fixed: Octave buttons were not updated in sequencer modes.

7.21 (Bitwig 2.4+)

• Requires Bitwig 2.4+.
• OSC
  • New: /playbutton - Toggles playback, you can configure the Stop behaviour in the configuration settings
  • Fixed: All /vkb_midi commands did crash

7.20 (Bitwig 2.4)

• Requires Bitwig 2.4+.
• Launchpad Pro
  • New: Added user mode. Press USER button to enter. Scene buttons switch between the 8 pages of 8 parameters.
• Novation Remote SL Mk III
  • New: Added setting to disable the faders (to prevent accidently changing volume)
• Push
  • New: Session: The octave and page buttons navigate the pages of the session grid
  • New: Second row buttons (buttons above display on Push 2) allows now to toggle between min/max values in User mode.
  • Fixed: Push 2: Notification messages were not shown on the display
• OSC
  • New: Added user parameters