10.9.3 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• All devices
  • New: The cursor clip can now be pinned in the studio pane (below the cursor track). By using this you can edit different launcher clips on multiple controllers.
• Novation SLMkIII
  • New: Press Stop + Clip in Session mode to stop the playback of the clip.
  • New: Shift + Play toggles write arranger automation.
  • New: Shift + Loop toggles write clip launcher automation.
• OSC
  • New: Added new command /track/{1-8}/remove
  • New: Added new command /device/remove
• Push 1/2
  • New: First button in the clip mode toggles if the clip is pinned.
  • New: Improved the layout of the Groove mode.

10.9.2 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• All devices
  • Fixed: Implemented a workaround for parameters not showing their renamed labels.
• MCU
  • Fixed: Scrolling in browser did always jump between first and last item.

10.9.1 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• APCmini
  • Fixed: Switching modes was broken.
• Beatstep
  • Fixed: Changing scale base note did only work in one direction.
• Fire
  • New: Activate delete mode and press the select knob to delete the currently selected device.
  • Fixed: Don't apply knob speed settings in Browser mode.
• Generic Flexi
  • New: Display parameter changes for Note Input functions.
  • New: Scale Note Input period and length to 127 for better use with absolute faders and knobs. If you assigned these to multiple buttons you need to update their values.
• Launchpad
  • Fixed: Duplicating notes in Poly Sequencer did create notes with velocity of 0 for all notes.
• Push
  • Fixed: Duplicating notes in Poly Sequencer did create notes with velocity of 0 for all notes.

10.9.0 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• Fire
  • New: In Shift mode the 10th button of the first row (blue) activates duplicate mode. Can be used with the first row of the Mix mode to duplicate tracks and with clips in the Session mode.
  • New: In Shift mode the 12th button of the first row (red) activates delete mode. Can be used with the first row of the Mix mode to delete tracks and with clips in the Session mode.
  • New: In Shift mode the 11th button of the first row (green) doubles the content of the currently selected clip.
  • New: Press Stop+Clip in Session mode to stop the playback of the clip.
• Midi Monitor
  • Fixed: Displayed note octave was wrong for Note on/off and Poly aftertouch (e.g. showed C6 instead of C4).
• MCU
  • New: Added User mode. Press Device button twice to activate user mode.
• OSC
  • New: Added /update before and after each update cycle (if there is at least 1 update message).
  • New: /track/{1-8}/name {text} - Set a new name for the track
  • New: /device/layer/{1-8}/name {text} - Set a new name for the layer
  • New: Open Stage Control template: name of track and layer can be set
  • New: Open Stage Control template: added data receive indicator LED to transport bar
• SL Mk III
  • Fixed: Lightguide was only drawn black but not turned off on the hardware when disabled in the settings. The hardware light guide can now used again when the settings is disabled.

10.8.0 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• APC40
  • Fixed: Changing tempo in combination with Shift button left the shift mode active.
• Launchpad
  • Fixed: Crash when session mode was flipped and 8th row was active.
  • Fixed: Session grid was off by 1 if 8th row was active and long press was used (also crashed on 1st row).
  • Fixed: Stop all clips button was missing in Shift mode on Pro models.
• Maschine Mk3
  • New: Converted knobs to new hardware API.
  • Fixed: Scene, pattern and fixed velocity with encoder knob did behave erroneous.
• MCU
  • New: Converted knobs and faders to new hardware API.
  • Fixed: Page Up/Down (MCU MODE EQ / DYN) did not work.
• SL Mk I + II
  • New: Converted knobs and faders to new hardware API.
  • New: Show all tracks in volume mode (no need to switch between instrument/audio tracks, effect tracks and master).
  • Fixed: Crash in sequencer/play mode.
• SL Mk III
  • New: Out of scale keys of the light guide can now also be lit in dark grey. Select Chromatic in the document settings.
  • New: Converted faders and knobs to new hardware API.
  • Fixed: Switching modes did not work with single button presses.

10.7.4 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• APC40
  • New: Converted crossfader to new hardware API
  • Fixed: Knob value changes could hang if takeover mode was set to Catch.
  • Fixed: Coloring of Tempo mode in simulator was wrong.
• Fire
  • New: The pad index is now displayed (instead of the pad index).
  • New: Added knob speed settings
  • Fixed: Note was always created with velocity of 0 in drum sequencer (except when Accent was enabled).
• MCU
  • Fixed: Motor fader value changes could hang if takeover mode was set to Catch.

10.7.3 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• All devices
  • Fixed: Notification message display time was too short (since message was canceled straight away).
  • Fixed: Added a workaround for new hardware API always showing "Send" as the send name.
• APC40
  • New: Display Send index and name as well as user pages when changing to these modes.
  • Fixed: Crash when switching to effect tracks.
  • Fixed: Mk2: Do not switch to next Send when Send button was used in combination with track selection (to select Send N).
  • Fixed: Mk2: Last send mode was not remembered when changed with track selection combination.
• Komplete Kontrol Mk2
  • Fixed: Finished conversion to new hardware API, therefore volume and parameters change with the same speed again.
• Launchpad
  • New: When duplicating a clip the destination clip can now be chosen. Pro models: Keep Duplicate button pressed; choose the source clip (it must be a clip with content, you can still select a different clip with content); select the destination clip (this must be an empty clip, which can also be on a different track); release the Duplicate button. On the non-pro models, activate duplicate mode, duplicate mode is deactivated, as soon as you select an empty clip as the destination.
• Push
  • New: When duplicating a clip the destination clip can now be chosen. Keep Duplicate button pressed; choose the source clip (it must be a clip with content, you can still select a different clip with content); select the destination clip (this must be an empty clip, which can also be on a different track); release the Duplicate button.
  • Fixed: Select button is now blocked in Browse mode since it does not have any function in that mode and left the extension with a blank screen when accidently pressed.

10.7.2 (Bitwig 3.2.5+)

• AutoColor
  • Fixed: Crashed on startup
• Komplete Kontrol
  • Fixed: Crashed on startup

10.7.1 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• APC40 / APC40 mk2
  • New: APC40 mk2: Select user mode pages now with User+Select 1-8. Cursor keys change tracks like in pan and send mode.
  • New: Knobs in panorama and send mode as well as the faders and device knobs use the new hardware API.
  • Fixed: Pressing notes in drum sequencer for editing did always select notes in the first sequencer row.
• Fire
  • New: Knobs in Mixer and Parameter mode use the new hardware API.
• Launchpad Pro Mk3
  • Fixed: (Regression in 10.7) Mode selection did not always work
• MCU / Novation SLMkI/II
  • New: Removed "Display Crossfader on Track". Does not make much sense with these devices.
• Push
  • New: Removed "Display Crossfader on Track". On Push 2 the crossfade mode setting is now always visble and can be changed with the third knob in track mode. On Push 1 it is never displayed in track mode. Use the crossfade mode instead to change the settings.
  • New: Push 2: Nicer drawing of crossfade mode on channel
  • New: Push 2: The 4th/8th send name is now always displayed if the current tracks are not inside of a group. Furthermore, it is displayed if the 8th knob is touched.

10.7.0 (Bitwig 3.2.5+)

• Requires Bitwig 3.2.5+
• APCmini
  • New: Faders use new hardware API, simulator shows positions
• NI Kontrol Mk 1
  • New: Knobs use new hardware API, simulator shows positions
  • New: Added settings for knob speed
• NI Kontrol Mk 2
  • New: Knob speed settings are now from -100 to 100
• Launchpad
  • Fixed: Pro Mk3: The last selected play / sequencer mode was not restored
  • Fixed: Volume, Pan and Sends view was canceled when track selection changed.
• MCU
  • New: Added settings for knob speed
• NI Maschine Mk3
  • New: Added settings for knob speed
• OSC
  • Fixed: /vkb_midi/note/{0-127}/color did not send scale colors, only played notes
  • Fixed: Page size of user parameters was not changed (was always 8)
• Push 2
  • New: Knobs use new hardware API, simulator shows positions
  • Fixed: Shutdown of the display process did not always exit cleanly
  • Fixed: In user mode the value changes couldn't be slowed down by using Shift