24.6.0 (Bitwig 5.2+)

• Fixed: Browser could crash.
• Fixed: Scrolling items (e.g. tracks) left could jump in steps of 8. Side effect from the change that the 1st instead of the last item is selected when changing a page backwards.
• Maschine JAM
  • Fixed: When holding down Grid button in step sequencer mode, the group/channel buttons A-H did not reflect the available resolution options. Furthermore, the number of selectable resolutions was coupled to the number of tracks in the project.
• MCU
  • Fixed: Changed VU meter range (when Mackie is selected) to 0-12 instead of 0-13.
• OXI One
  • New: Added DrumXoX sequencer (press Arrange button twice).
  • New: Added the Raindrop sequencer (press Sequencer button 4 times).
  • New: Added automation mode (press Shift+MOD buttons).
  • New: Mixer mode: press Shift+track pads to stop the playing clip of the track.
  • Fixed: Drum 128 was named Drum 64 in the startup view setting.
• Push 1
  • Fixed: Notify played chords feature did halt other display updates.

24.5.1 (Bitwig 5.2+)

• AutoColor
  • Fixed: Could crash on start and shutdown.
• Kontrol Mk2/Mk3
  • New: Added support for Kontakt 8.
  • Fixed: Only show option to select mode-switch button on Mk3 devices.
• LaunchControl XL
  • New: Keep the Device button pressed and use Send Select up/down to switch between either the cursor device, track parameters or project parameters.
• Launchpad
  • New: Press Shift+Session twice to activate the new Scene Play view. In this view each pad represents 1 scene, which means that 64 scenes can be directly triggered.
• MCU
  • Fixed: Switched Shift+Press Knob in Parameter mode for selecting devices to Control+Press Knob to still be able to do fine adjustments with Shift+Knob.

24.5.0 (Bitwig 5.2+)

• New: Added support for APCmini mk2.
• New: Updated to Bitwig API 19.
• APCmini mk1
  • New: Added option to toggle 'Notify played chords' on/off.
• Fire
  • Fixed: Drum 64 view: Shifting the notes up/down with select knob did not work.
• Fire, Launchpad, Push
  • Fixed: Drum 64 view: Notes were not in sync with pad colors.
• Push
  • Fixed: Drum XoX view was missing from preferred view selection in settings.

24.4.0 (Bitwig 5.2+)

• New: Updated to JDK 21.
• Fire
  • New: Added setting 'Color all track states (mute, solo, rec arm)' which allows to switch off the colors for the deactivated states in Mix mode.
  • New: Press Alt+Select knob to toggle the on/off state of the current device.
• Generic Flexi
  • New: Added setting for the length of a new clip.
• OXI One
  • Fixed: Extension did crash in 24.3 (regression).

24.3.0 (Bitwig 5.0+)

• Requires Bitwig 5.0+
• All devices
  • New: When scrolling track bank page left the 1st instead of the last track of the new page is selected.
• APC40mkII, Fire, Launchpad, Maschine, Maschine JAM, OXI One, Push
  • New: Added option to disable showing played chords.
  • New: Renamed setting Default note view to Startup view.
• Fire
  • New: The Shift mode is not activated when ALT is already pressed.
  • Fixed: Slow knob mode got stuck when pressing SHIFT a second time.
• Launchpad
  • New: The bird's eye view in session mode is now closed automatically if the Session button is kept pressed.
  • New: In Project/Track params mode the scene buttons do now select the pages 1-8 (instead of blocks of 8 pages).
  • Fixed: Extension crashed when pressing one of the cursor keys in clip loop edit view.
  • Fixed: Shift mode should not be activated when used in combination with cursor keys in session mode.
• Maschine, OXI One
  • New: Added new setting 'Startup view' which allows to auto-select the preferred view on startup.
• MCU
  • New: Keep the Option button pressed to show the parameter pages of the selected device. Press the respective knob to select the page for editing.
  • New: Device mode shows number of available pages on 2nd display.
• Push 1
  • New: Notification messages which are shorter than 18 characters are now shown in the right upper corner of the display instead of clearing the whole display.

24.2.0 (Bitwig 5.0+)

• MCU
  • New: Added additional MCU support for Asparion D700 series.
  • New: Track names have a prefix of the send index in Send mode.

24.1.0 (Bitwig 5.0+)

• APC40mkII, Fire, Launchpad, Maschine, Maschine JAM, OXI One, Push
  • New: Added new setting 'Turn off scale pads'. If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
  • New: Played chords are displayed in play modes.
• Fire
  • New: The Shift Mode allows to pin the cursor track, cursor device and cursor clip (3 green buttons in the 2nd row from the top).
  • New: The Automation Write Mode can be selected in the Shift Mode (buttons of the 3rd row).
  • New: The initial pad brightness is now set to 20%.
  • New: Switched button combinations for changing the root note and changing the scale layout.
  • New: Toggling clip launcher/arranger automation gives now feedback in the display.
• Generic Flexi
  • New: Functions can now be assigned to 10 different layers. With the 'Function Layers' functions each layer can be temporarily or permanently activated.
  • New: Added functions for Groove: 'Toggle Active', 'Set Shuffle Amount', 'Set Accent Amount'.
  • New: Added functions 'Track: Scroll Bank Page by 1 left', 'Track: Scroll Bank Page by 1 right'.
  • New: Added functions 'FX Track: Scroll Bank Page by 1 left', 'FX Track: Scroll Bank Page by 1 right'.
  • New: Added functions 'Scene: Scroll Bank Page by 1 left', 'Scene: Scroll Bank Page by 1 right'.
  • New: Added settings for 'Behaviour on Pause' and 'Behaviour on Stop'.
• HUI
  • New: Added track, device and EQ modes.
  • New: AUTO1-8 is used for knob press as well (e.g. used like this with X-Touch).
  • New: 'Paste' adds an instrument track.
  • New: 'Shift+Paste' adds an effect track.
  • New: 'Option+Paste' adds an audio track.
  • New: 'Copy' inserts/replaces a device.
  • New: 'Shift+Copy' inserts a device before the currently selected device.
  • New: Option+Copy' inserts a device after the currently selected device.
• MCU
  • New: Keep the Shift button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
  • New: Added 'Channel Prev/Next' to the function commands which emulate the respective buttons for devices which do not have them.
• OSC
  • New: Added command to de-/activate a layer (/device/layer/{1-8}/activated).
• OXI One
  • New: Playing/recording clips do no longer blink.
• Push 1-3
  • New: In Clips and Markers mode the knobs control now the volume of the tracks.
  • New: Added Load/Save commands to the master mode.
• SLMk3
  • New: Project Parameter Mode - info display shows now the project name.
  • New: Track Parameter Mode - info display shows now the track name.
  • New: Parameter Mode - info display shows now the track name instead of the selected parameter page.
  • New: The first instrument of the track can now be edited (long press UP, then select 'First Ins').
  • Fixed: Selecting Project/Track parameter pages did not work.

24.0.0 (Bitwig 5.0+)

• Added support for OXI One hardware sequencer.
• All devices
  • Fixed: Device detection was broken on Macos ARM.
• Maschine JAM
  • Fixed: Extension crashed due to an ill-formatted sysex message.
• MCU
  • Fixed: Device layers could not be navigated.

23.2.2 (Bitwig 5.0+)

• Akai Fire
  • New: When unselecting the last edit note in seqencers a notification is now shown that the note edit mode is off.
  • Fixed: In drum sequencers when the last edit note was unselected, it was deleted as well.
• HUI
  • New: Automation mode is shown in the display when a new mode is selected.
• Launchpad Pro
  • Fixed: Play mode restore did not work when combined with keeping Track Select button pressed.
• Native Instruments Kontrol Mk3
  • New: 'Metronome' can now also be selected to switch modes.
• Native Instruments Maschine Mk2/Studio
  • Fixed: Shift+Cursor left/right did not switch parameter pages.

23.2.1 (Bitwig 5.0+)

• AutoColor
  • Fixed: Delayed the color change a bit to allow Undo to work.
• HUI
  • Fixed: The right VU meter was not working
• Native Instruments Kontrol
  • New: Mute/solo states are switched off in Parameter and Send Mode to prevent that the graphics get darkened in the display. Mute/solo buttons can still be used but state will not be visible in these modes.
  • Fixed: Added missing Poly-Aftertouch (available in 88-key model).