MCC Universal Library for Linux

Handle multiple buttons using single analog pin for ESP32

This script shows how to use nidaqmx package to simultaneously and continuously write to and read from an NI DAQ measurement card analog I/O's.

Teensy ADC with DMA and dual buffer server

a 10k mechanical keypad with support for variable input hall effect switches

BLE Automation-IO server on Adafruit device, with pythonista and/or raspberry AIOS-client

Teensy 3.x ADC with DMA internal clock

This repository contains the source code and documentation of a one week project called FAJKER. It's purpose is to make time tracking on construction sites easier.

This device reads 4 analog signals at 16 bits with very low noise.

c++11 header files that can be used by your c++ programs

This Arduino project involves measuring both AC and DC voltages using the ZMPT101B voltage sensor and an analog pin, respectively. The AC voltage is read from the ZMPT101B sensor connected to pin A0, while the DC voltage is read from an analog pin (A1). The measured values are displayed on a 16x2 LCD screen with I2C communication and printed via Se

Teensy 3.x/LC ADC implementation

Provides nodes to access EWIO2 interfaces like IOs and metering - from Node-RED

Gathers software elements allowing to abstract the Arduino plateform for hardware I/O management.

A simple application used to read data from NIDAQ devices and save it on the disk.

Contains examples of voltage and current measurement with Arduino. Arduino analog pins are used to measure current and voltage. The measured current and voltage values are displayed on the Nextion screen.