Opel_Astra_H_opc_CAN-GaugeV2

New version, looks like BC from Nissan GT-R and uses large touchscreen Needs Waveshare 4inch RPi LCD (C) ILI9486 display and lib

Watch demo on https://youtu.be/G2oHpHkk6c8
You may need to comment out ``#include "utils/debug.h"`` in TeensyThreads.h (line 29)

Hardware:

- Teensy 4.0
- 2x Waveshare CAN Board SN65HVD230
- Waveshare 4inch RPi LCD (C) ILI9486 with XPT2046 Touch
- LM2596 DC/DC Converter - set 5.0 Volt output

Car:

Opel Astra H opc 2007

Interface 1 connection:

HSCAN 500 kBaud (Pin 6 and 14 on OBD connector)

Interface 2 connection:

MSCAN 33.3 kBaud (Pin 1 and 5(GND) on OBD connector)

Circuit board layout (EAGLE)

In order to be able to control the brightness of the LCD, you have to bridge these contacts on the back of the LCD.

Then a wire must be laid from Teensy pin 3 to LCD pin 12 (included in Circuit-Board-Rev-1.1).