This is my evaluation board for interfacing Telit SE880 GPS chip module with EFM32LG-STK3600 EFM32 Leopard Gecko Starter Kit.

I had lot of trouble during the SE880 chip module manufacturing, forget hot air blower! This is a 3D chip module with embedded parts, like capacitors, resistors, etc. You need to follow the exact heat profile provided by Telit in tha datasheet. So using an SMT heat oven is highly recommended!

My PCB is assembled (by professional contract manufacturer) and I confirm: it works! The parts are correct.

I have assambled PCBs to sell, please contact me about the details!

Validated Eagle Parts in this project: Telit SE880 http://www.telit.com/products/product-service-selector/product-service-selector/show/product/jupiter-se880/

EFM32LG-STK3600 interface connector, pinhead connector https://www.silabs.com/products/mcu/lowpower/Pages/efm32lg-stk3600.aspx

TI TXS0108E 8-Bit Bidirectional Voltage-Level Shifter For Open-Drain And Push-Pull Application http://www.ti.com/product/txs0108e

TI LP5907 250mA, Ultra-Low Noise Low-Dropout Regulator http://www.ti.com/product/LP5907

AVX / Kyocera TCXO Oscillators 16.369MHz 1.8Volts 2.5mmx2mm Sine Wave http://www.mouser.co.uk/Search/Refine.aspx?Keyword=581-KT2520F16ACW18T

Abracon ABS06-32.768KHZ-T XTAL http://www.digikey.com/product-detail/en/ABS06-32.768KHZ-T/535-10104-1-ND/2089921