jkjoy
/
hexo
mirror of https://github.com/jkjoy/sunpeiwen.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
hexo/node_modules/ssh2-sftp-client/README.org

1801 lines
69 KiB
Org Mode
Raw Blame History

#+OPTONS: H:2 toc:2
#+TITLE: SSH2 SFTP Client
* Overview
an SFTP client for node.js, a wrapper around [[https://github.com/mscdex/ssh2][SSH2]] which provides a high level
convenience abstraction as well as a Promise based API.
Documentation on the methods and available options in the underlying modules can
be found on the [[https://github.com/mscdex/ssh2][SSH2]] project pages.
Current stable release is *v7.2.3*.
Code has been tested against Node versions 14.19.1, 16.14.2 and 17.8.0
Node versions < 12.x are not supported. However, node v10.x should still work,
although some tests will fail due to changes in file system functions used in
test setup and tear down.
* Installation
#+begin_src shell
npm install ssh2-sftp-client
#+end_src
* Basic Usage
#+begin_src javascript
let Client = require('ssh2-sftp-client');
let sftp = new Client();
sftp.connect({
host: '127.0.0.1',
port: '8080',
username: 'username',
password: '******'
}).then(() => {
return sftp.list('/pathname');
}).then(data => {
console.log(data, 'the data info');
}).catch(err => {
console.log(err, 'catch error');
});
#+end_src
* Version 7.x Changes
- This version is based on version 1.x.x of ~ssh2~. This version of ~ssh2~ is a
complete re-write of the ~ssh2~ library. This re-write addresses issues
encountered when using node v14 as well as some design weaknesses in the
previous 0.8.x version.
- *Breaking Change* Expanded option handling for ~get()~ and ~put()~ methods. A number of use
cases were identified where setting specific options on the read and write
streams and the pipe operation are necessary. For example, disabling ~autoClose~ on streams or the ~end~ event in pipes. The ~options~ argument for ~get()~ and ~put()~ calls now supports properties for ~readStreamOptions~, ~writeStreamOptions~ and ~pipeOptions~. Note that options are only applied to
streams created by the ~get()~ and ~put()~ methods. Streams passed into these
methods are under the control of the client code and therefore cannot have
options supplied in arguments to those streams (you would apply such options
when you create the streams). Options are typically only necessary in special
use cases. Most of the time, no options are required. However, if you are
currently using options to either ~put()~ or ~get()~, you will need to update
your code to map these options to the new structure.
- *Breaking Change 7.1.0* A race condition was identified when using a put()
call with a writeStream option of ~autoClose: false~. In some situations, the
promise would be resolved before the final close of the write stream. This
could result in errors if you immediately attempt to access the uploaded
file. To avoid this situatioin, the promise is now resolved once a ~close~
event is emitted. This means that setting ~autoClose: false~ can no longer be
supported. The write stream for ~put()~ will autoClose once data writing has completed.
- Improved event handling. A listener for a global error event is now defined to
catch errors which occur in-between method calls i.e. connection lost
in-between calls to the library methods. A new mechanism has also been added
for removal of listeners when no longer required.
- uploadDir/downloadDir change in 7.2.3. THe uploadDir() and downloadDir()
methods previously used fastPut() and fastGet() to transfer data.
Unfortunately, not all SFTP servers support the concurrent processing used by
these methods. This meant these methods would fail on some platforms. For now,
the fastPut() and fastGet() calls have been replaced with plain put() and
get() calls. This will mean uploadDir()/downloadDir() will be slower. However,
there is other larger changes in the works which should see a significant
speed imp[rovement for these (and other methods). We may also add an option
which will allow for selection of fastPut()/fastGet().
* Documentation
The connection options are the same as those offered by the underlying SSH2
module. For full details, please see [[https://github.com/mscdex/ssh2#user-content-client-methods][SSH2 client methods]]
All the methods will return a Promise, except for ~on()~ and
~removeListener()~, which are typically only used in special use cases.
** Specifying Paths
The convention with both FTP and SFTP is that paths are specified using a
'nix' style i.e. use ~/~ as the path separator. This means that even if your
SFTP server is running on a win32 platform, you should use ~/~ instead of ~\~
as the path separator. For example, for a win32 path of ~C:\Users\fred~ you
would actually use ~/C:/Users/fred~. If your win32 server does not support
the 'nix' path convention, you can try setting the ~remotePathSep~ property
of the ~SftpClient~ object to the path separator of your remote server. This *might* work, but has not been tested. Please let me know if you need to do
this and provide details of the SFTP server so that I can try to create an
appropriate environment and adjust things as necessary. At this point, I'm
not aware of any win32 based SFTP servers which do not support the 'nix' path
convention.
All remote paths must either be absolute e.g. ~/absolute/path/to/file~ or
they can be relative with a prefix of either ~./~ (relative to current remote
directory) or ~../~ (relative to parent of current remote directory) e.g. ~./relative/path/to/file~ or ~../relative/to/parent/file~. It is also
possible to do things like ~../../../file~ to specify the parent of the
parent of the parent of the current remote directory. The shell tilde (~~~)
and common environment variables like ~$HOME~ are NOT supported.
It is important to recognise that the current remote directory may not always
be what you may expect. A lot will depend on the remote platform of the SFTP
server and how the SFTP server has been configured. When things don't seem to
be working as expected, it is often a good idea to verify your assumptions
regarding the remote directory and remote paths. One way to do this is to
login using a command line program like ~sftp~ or ~lftp~.
There is a small performance hit for using ~./~ and ~../~ as the module must
query the remote server to determine what the root path is and derive the
absolute path. Using absolute paths are therefore more efficient and likely
more robust.
When specifying file paths, ensure to include a full path i.e. include the
remote filename. Don't expect the module to append the local file name to the
path you provide. For example, the following will not work
#+begin_src javascript
client.put('/home/fred/test.txt', '/remote/dir');
#+end_src
will not result in the file ~test.txt~ being copied to ~/remote/dir/test.txt~. You need to specify the target filename as well e.g.
#+begin_src javascript
client.put('/home/fred/test.txt', '/remote/dir/test.txt');
#+end_src
Note that the remote file name does not have to be the same as the local file
name. The following works fine;
#+begin_src javascript
client.put('/home/fred/test.txt', '/remote/dir/test-copy.txt');
#+end_src
This will copy the local file ~test.txt~ to the remote file ~test-copy.txt~
in the directory ~/remote/dir~.
** Methods
*** new SftpClient(name) ===> SFTP client object
Constructor to create a new ~ssh2-sftp-client~ object. An optional ~name~ string
can be provided, which will be used in error messages to help identify which
client has thrown the error.
**** Constructor Arguments
- name :: string. An optional name string used in error messages
**** Example Use
#+begin_src javascript
'use strict';
const Client = require('ssh2-sftp-client');
const config = {
host: 'example.com',
username: 'donald',
password: 'my-secret'
};
const sftp = new Client('example-client');
sftp.connect(config)
.then(() => {
return sftp.cwd();
})
.then(p => {
console.log(`Remote working directory is ${p}`);
return sftp.end();
})
.catch(err => {
console.log(`Error: ${err.message}`); // error message will include 'example-client'
});
#+end_src
*** connect(config) ===> SFTP object
Connect to an sftp server. Full documentation for connection options is
available [[https://github.com/mscdex/ssh2#user-content-client-methods][here]]
**** Connection Options
This module is based on the excellent [[https://github.com/mscdex/ssh2#client][SSH2]] module. That module is a general SSH2
client and server library and provides much more functionality than just SFTP
connectivity. Many of the connect options provided by that module are less
relevant for SFTP connections. It is recommended you keep the config options to
the minimum needed and stick to the options listed in the ~commonOpts~ below.
The ~retries~, ~retry_factor~ and ~retry_minTimeout~ options are not part of the
SSH2 module. These are part of the configuration for the [[https://www.npmjs.com/package/retry][retry]] package and what
is used to enable retrying of sftp connection attempts. See the documentation
for that package for an explanation of these values.
#+begin_src javascript
// common options
let commonOpts {
host: 'localhost', // string Hostname or IP of server.
port: 22, // Port number of the server.
forceIPv4: false, // boolean (optional) Only connect via IPv4 address
forceIPv6: false, // boolean (optional) Only connect via IPv6 address
username: 'donald', // string Username for authentication.
password: 'borsch', // string Password for password-based user authentication
agent: process.env.SSH_AGENT, // string - Path to ssh-agent's UNIX socket
privateKey: fs.readFileSync('/path/to/key'), // Buffer or string that contains
passphrase: 'a pass phrase', // string - For an encrypted private key
readyTimeout: 20000, // integer How long (in ms) to wait for the SSH handshake
strictVendor: true // boolean - Performs a strict server vendor check
debug: myDebug // function - Set this to a function that receives a single
// string argument to get detailed (local) debug information.
retries: 2 // integer. Number of times to retry connecting
retry_factor: 2 // integer. Time factor used to calculate time between retries
retry_minTimeout: 2000 // integer. Minimum timeout between attempts
};
// rarely used options
let advancedOpts {
localAddress,
localPort,
hostHash,
hostVerifier,
agentForward,
localHostname,
localUsername,
tryKeyboard,
authHandler,
keepaliveInterval,
keepaliveCountMax,
sock,
algorithms,
compress
};
#+end_src
**** Example Use
#+begin_src javascript
sftp.connect({
host: example.com,
port: 22,
username: 'donald',
password: 'youarefired'
});
#+end_src
*** list(path, pattern) ==> Array[object]
Retrieves a directory listing. This method returns a Promise, which once
realised, returns an array of objects representing items in the remote
directory.
- path :: {String} Remote directory path
- pattern :: (optional) {string|RegExp} A pattern used to filter the items included in the returned
array. Pattern can be a simple /glob/-style string or a regular
expression. Defaults to ~/.*/~.
**** Example Use
#+begin_src javascript
const Client = require('ssh2-sftp-client');
const config = {
host: 'example.com',
port: 22,
username: 'red-don',
password: 'my-secret'
};
let sftp = new Client;
sftp.connect(config)
.then(() => {
return sftp.list('/path/to/remote/dir');
})
.then(data => {
console.log(data);
})
.then(() => {
sftp.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
**** Return Objects
The objects in the array returned by ~list()~ have the following properties;
#+begin_src javascript
{
type: // file type(-, d, l)
name: // file name
size: // file size
modifyTime: // file timestamp of modified time
accessTime: // file timestamp of access time
rights: {
user:
group:
other:
},
owner: // user ID
group: // group ID
}
#+end_src
**** Pattern Filter
The filter options can be a regular expression (most powerful option) or a
simple /glob/-like string where * will match any number of characters, e.g.
#+begin_example
foo* => foo, foobar, foobaz
,*bar => bar, foobar, tabbar
,*oo* => foo, foobar, look, book
#+end_example
The /glob/-style matching is very simple. In most cases, you are best off using
a real regular expression which will allow you to do more powerful matching and
anchor matches to the beginning/end of the string etc.
*** exists(path) ==> boolean
Tests to see if remote file or directory exists. Returns type of remote object
if it exists or false if it does not.
**** Example Use
#+begin_src javascript
const Client = require('ssh2-sftp-client');
const config = {
host: 'example.com',
port: 22,
username: 'red-don',
password: 'my-secret'
};
let sftp = new Client;
sftp.connect(config)
.then(() => {
return sftp.exists('/path/to/remote/dir');
})
.then(data => {
console.log(data); // will be false or d, -, l (dir, file or link)
})
.then(() => {
sftp.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** stat(path) ==> object
Returns the attributes associated with the object pointed to by ~path~.
- path :: String. Remote path to directory or file on remote server
**** Attributes
The ~stat()~ method returns an object with the following properties;
#+begin_src javascript
let stats = {
mode: 33279, // integer representing type and permissions
uid: 1000, // user ID
gid: 985, // group ID
size: 5, // file size
accessTime: 1566868566000, // Last access time. milliseconds
modifyTime: 1566868566000, // last modify time. milliseconds
isDirectory: false, // true if object is a directory
isFile: true, // true if object is a file
isBlockDevice: false, // true if object is a block device
isCharacterDevice: false, // true if object is a character device
isSymbolicLink: false, // true if object is a symbolic link
isFIFO: false, // true if object is a FIFO
isSocket: false // true if object is a socket
};
#+end_src
**** Example Use
#+begin_src javascript
let client = new Client();
client.connect(config)
.then(() => {
return client.stat('/path/to/remote/file');
})
.then(data => {
// do something with data
})
.then(() => {
client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** get(path, dst, options) ==> String|Stream|Buffer
Retrieve a file from a remote SFTP server. The ~dst~ argument defines the
destination and can be either a string, a stream object or undefined. If it is a
string, it is interpreted as the path to a location on the local file system
(path should include the file name). If it is a stream object, the remote data
is passed to it via a call to pipe(). If ~dst~ is undefined, the method will put
the data into a buffer and return that buffer when the Promise is resolved. If
~dst~ is defined, it is returned when the Promise is resolved.
In general, if you're going to pass in a string as the destination, you are
better off using the ~fastGet()~ method.
- path :: String. Path to the remote file to download
- dst :: String|Stream. Destination for the data. If a string, it
should be a local file path.
- options :: Options for the ~get()~ command (see below).
**** Options
The ~options~ argument can be used to pass options to the underlying streams and
pipe call used by this method. The argument is an object with three possible
properties, ~readStreamOptions~, ~writeStreamOptions~ and ~pipeOptions~. The
values for each of these properties should be an object containing the required
options. For example, possible read stream and pipe options could be defined as
#+begin_src javascript
let options = {
readStreamOptions: {
flags: 'r',
encoding: null,
handle: null,
mode: 0o666,
autoClose: true
},
pipeOptions: {
end: false
}};
#+end_src
Most of the time, you won't want to use any options. Sometimes, it may be useful
to set the encoding. For example, to 'utf-8'. However, it is important not to do
this for binary files to avoid data corruption.
**** Example Use
#+begin_src javascript
let client = new Client();
let remotePath = '/remote/server/path/file.txt';
let dst = fs.createWriteStream('/local/file/path/copy.txt');
client.connect(config)
.then(() => {
return client.get(remotePath, dst);
})
.then(() => {
client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
- Tip :: See examples file in the Git repository for more examples. You can pass
any writeable stream in as the destination. For example, if you pass in ~zlib.createGunzip()~ writeable stream, you can both download and
decompress a gzip file 'on the fly'.
*** fastGet(remotePath, localPath, options) ===> string
Downloads a file at remotePath to localPath using parallel reads for faster
throughput. This is the simplest method if you just want to download a file.
- remotePath :: String. Path to the remote file to download
- localPath :: String. Path on local file system for the downloaded file. The
local path should include the filename to use for saving the
file.
- options :: Options for ~fastGet()~ (see below)
**** Options
#+begin_src javascript
{
concurrency: 64, // integer. Number of concurrent reads to use
chunkSize: 32768, // integer. Size of each read in bytes
step: function(total_transferred, chunk, total) // callback called each time a
// chunk is transferred
}
#+end_src
- Warning :: Some servers do not respond correctly to requests to alter chunk
size. This can result in lost or corrupted data.
**** Sample Use
#+begin_src javascript
let client = new Client();
let remotePath = '/server/path/file.txt';
let localPath = '/local/path/file.txt';
client.connect(config)
.then(() => {
client.fastGet(remotePath, localPath);
})
.then(() => {
client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** put(src, remotePath, options) ==> string
Upload data from local system to remote server. If the ~src~ argument is a
string, it is interpreted as a local file path to be used for the data to
transfer. If the ~src~ argument is a buffer, the contents of the buffer are
copied to the remote file and if it is a readable stream, the contents of that
stream are piped to the ~remotePath~ on the server.
- src :: string | buffer | readable stream. Data source for data to copy to the
remote server.
- remotePath :: string. Path to the remote file to be created on the server.
- options :: object. Options which can be passed to adjust the read and write stream used
in sending the data to the remote server or the pipe call used to
make the data transfer (see below).
**** Options
The options object supports three properties, ~readStreamOptions~,
~writeStreamOptions~ and ~pipeOptions~. The value for each property should be an
object with options as properties and their associated values representing the
option value. For example, you might use the following to set ~writeStream~ options.
#+begin_src javascript
{
writeStreamOptions: {
flags: 'w', // w - write and a - append
encoding: null, // use null for binary files
mode: 0o666, // mode to use for created file (rwx)
}}
#+end_src
The most common options to use are mode and encoding. The values shown above are
the defaults. You do not have to set encoding to utf-8 for text files, null is
fine for all file types. However, using utf-8 encoding for binary files will
often result in data corruption.
Note that you cannot set ~autoClose: false~ for ~writeStreamOptions~. If you
attempt to set this property to false, it will be ignored. This is necessary to
avoid a race condition which may exist when setting ~autoClose~ to false on the
writeStream. As there is no easy way to access the writeStream once the promise
has been resolved, setting this to autoClose false is not terribly useful as
there is no easy way to manually close the stream after the promise has been
resolved.
**** Example Use
#+begin_src javascript
let client = new Client();
let data = fs.createReadStream('/path/to/local/file.txt');
let remote = '/path/to/remote/file.txt';
client.connect(config)
.then(() => {
return client.put(data, remote);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
- Tip :: If the src argument is a path string, consider just using ~fastPut()~.
*** fastPut(localPath, remotePath, options) ==> string
Uploads the data in file at ~localPath~ to a new file on remote server at
~remotePath~ using concurrency. The options object allows tweaking of the fast put process.
- localPath :: string. Path to local file to upload
- remotePath :: string. Path to remote file to create
- options :: object. Options passed to createWriteStream (see below)
**** Options
#+begin_src javascript
{
concurrency: 64, // integer. Number of concurrent reads
chunkSize: 32768, // integer. Size of each read in bytes
mode: 0o755, // mixed. Integer or string representing the file mode to set
step: function(total_transferred, chunk, total) // function. Called every time
// a part of a file was transferred
}
#+end_src
- Warning :: There have been reports that some SFTP servers will not honour
requests for non-default chunk sizes. This can result in data loss
or corruption.
**** Example Use
#+begin_src javascript
let localFile = '/path/to/file.txt';
let remoteFile = '/path/to/remote/file.txt';
let client = new Client();
client.connect(config)
.then(() => {
client.fastPut(localFile, remoteFile);
})
.then(() => {
client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** append(input, remotePath, options) ==> string
Append the ~input~ data to an existing remote file. There is no integrity
checking performed apart from normal writeStream checks. This function simply
opens a writeStream on the remote file in append mode and writes the data passed
in to the file.
- input :: buffer | readStream. Data to append to remote file
- remotePath :: string. Path to remote file
- options :: object. Options to pass to writeStream (see below)
**** Options
The following options are supported;
#+begin_src javascript
{
flags: 'a', // w - write and a - append
encoding: null, // use null for binary files
mode: 0o666, // mode to use for created file (rwx)
autoClose: true // automatically close the write stream when finished
}
#+end_src
The most common options to use are mode and encoding. The values shown above are
the defaults. You do not have to set encoding to utf-8 for text files, null is
fine for all file types. Generally, I would not attempt to append binary files.
**** Example Use
#+begin_src javascript
let remotePath = '/path/to/remote/file.txt';
let client = new Client();
client.connect(config)
.then(() => {
return client.append(Buffer.from('Hello world'), remotePath);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** mkdir(path, recursive) ==> string
Create a new directory. If the recursive flag is set to true, the method will
create any directories in the path which do not already exist. Recursive flag
defaults to false.
- path :: string. Path to remote directory to create
- recursive :: boolean. If true, create any missing directories in the path as
well
**** Example Use
#+begin_src javascript
let remoteDir = '/path/to/new/dir';
let client = new Client();
client.connect(config)
.then(() => {
return client.mkdir(remoteDir, true);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** rmdir(path, recursive) ==> string
Remove a directory. If removing a directory and recursive flag is set to
~true~, the specified directory and all sub-directories and files will be
deleted. If set to false and the directory has sub-directories or files, the
action will fail.
- path :: string. Path to remote directory
- recursive :: boolean. If true, remove all files and directories in target
directory. Defaults to false
*Note*: There has been at least one report that some SFTP servers will allow
non-empty directories to be removed even without the recursive flag being set to
true. While this is not standard behaviour, it is recommended that users verify
the behaviour of rmdir if there are plans to rely on the recursive flag to
prevent removal of non-empty directories.
**** Example Use
#+begin_src javascript
let remoteDir = '/path/to/remote/dir';
let client = new Client();
client.connect(config)
.then(() => {
return client.rmdir(remoteDir, true);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** delete(path, noErrorOK) ==> string
Delete a file on the remote server.
- path :: string. Path to remote file to be deleted.
- noErrorOK :: boolean. If true, no error is raised when you try to delete a
non-existent file. Default is false.
**** Example Use
#+begin_src javascript
let remoteFile = '/path/to/remote/file.txt';
let client = new Client();
client.connect(config)
.then(() => {
return client.delete(remoteFile);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** rename(fromPath, toPath) ==> string
Rename a file or directory from ~fromPath~ to ~toPath~. You must have the
necessary permissions to modify the remote file.
- fromPath :: string. Path to existing file to be renamed
- toPath :: string. Path to new file existing file is to be renamed to. Should
not already exist.
**** Example Use
#+begin_src javascript
let from = '/remote/path/to/old.txt';
let to = '/remote/path/to/new.txt';
let client = new Client();
client.connect(config)
.then(() => {
return client.rename(from, to);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** posixRename(fromPath, toPath) ==> string
This method uses the openssh POSIX rename extension introduced in OpenSSH 4.8.
The advantage of this version of rename over standard SFTP rename is that it is
an atomic operation and will allow renaming a resource where the destination
name exists. The POSIX rename will also work on some filesystems which do not
support standard SFTP rename because they don't support the system hardlink()
call. The POSIX rename extension is available on all openSSH servers from 4.8
and some other implementations. This is an extension to the standard SFTP
protocol and therefore is not supported on all sSFTP servers.
- fromPath :: string. Path to existing file to be renamed.
- toPath :: string. Path for new name. If it already exists, it will be replaced
by file specified in fromPath
#+begin_src javascript
let from = '/remote/path/to/old.txt';
let to = '/remote/path/to/new.txt';
let client = new Client();
client.connect(config)
.then(() => {
return client.posixRename(from, to);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** chmod(path, mode) ==> string
Change the mode (read, write or execute permissions) of a remote file or
directory.
- path :: string. Path to the remote file or directory
- mode :: octal. New mode to set for the remote file or directory
**** Example Use
#+begin_src javascript
let path = '/path/to/remote/file.txt';
let newMode = 0o644; // rw-r-r
let client = new Client();
client.connect(config)
.then(() => {
return client.chmod(path, newMode);
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** realPath(path) ===> string
Converts a relative path to an absolute path on the remote server. This method
is mainly used internally to resolve remote path names.
*Warning*: Currently, there is a platform inconsistency with this method on
win32 platforms. For servers running on non-win32 platforms, providing a path
which does not exist on the remote server will result in an empty e.g. '',
absolute path being returned. On servers running on win32 platforms, a
normalised path will be returned even if the path does not exist on the remote
server. It is therefore advised not to use this method to also verify a path
exists. instead, use the ~exist()~ method.
- path :: A file path, either relative or absolute. Can handle '.' and '..', but
does not expand '~'.
*** cwd() ==> string
Returns what the server believes is the current remote working directory.
*** uploadDir(srcDir, dstDir, filter) ==> string
Upload the directory specified by ~srcDir~ to the remote directory specified by
~dstDir~. The ~dstDir~ will be created if necessary. Any sub directories within
~srcDir~ will also be uploaded. Any existing files in the remote path will be
overwritten.
The upload process also emits 'upload' events. These events are fired for each
successfully uploaded file. The ~upload~ event calls listeners with 1 argument,
an object which has properties source and destination. The source property is
the path of the file uploaded and the destination property is the path to where
the file was uploaded to. The purpose of this event is to provide some way for
client code to get feedback on the upload progress. You can add your own lisener
using the ~on()~ method.
The optionsl /filter/ argument is a regular expression which can be used to
select which files and directories to include in the upload.
- srcDir :: A local file path specified as a string
- dstDir :: A remote file path specified as a string
- filter :: A regular expression used to filter which files and directories to
include in the upload
**** Example
#+begin_src javascript
'use strict';
// Example of using the uploadDir() method to upload a directory
// to a remote SFTP server
const path = require('path');
const SftpClient = require('../src/index');
const dotenvPath = path.join(__dirname, '..', '.env');
require('dotenv').config({path: dotenvPath});
const config = {
host: process.env.SFTP_SERVER,
username: process.env.SFTP_USER,
password: process.env.SFTP_PASSWORD,
port: process.env.SFTP_PORT || 22
};
async function main() {
const client = new SftpClient('upload-test');
const src = path.join(__dirname, '..', 'test', 'testData', 'upload-src');
const dst = '/home/tim/upload-test';
try {
await client.connect(config);
client.on('upload', info => {
console.log(`Listener: Uploaded ${info.source}`);
});
let rslt = await client.uploadDir(src, dst);
return rslt;
} finally {
client.end();
}
}
main()
.then(msg => {
console.log(msg);
})
.catch(err => {
console.log(`main error: ${err.message}`);
});
#+end_src
*** downloadDir(srcDir, dstDir, filter) ==> string
Download the remote directory specified by ~srcDir~ to the local file system
directory specified by ~dstDir~. The ~dstDir~ directory will be created if
required. All sub directories within ~srcDir~ will also be copied. Any existing
files in the local path will be overwritten. No files in the local path will be
deleted.
The method also emites ~download~ events to provide a way to monitor download
progress. The download event listener is called with one argument, an object
with two properties, source and destination. The source property is the path to
the remote file that has been downloaded and the destination is the local path
to where the file was downloaded to. You can add a listener for this event using
the ~on()~ method.
The optional /filter/ argument is a regular expression which can be used to
select which files and directories will be downloaded from the remote server.
- srcDir :: A remote file path specified as a string
- dstDir :: A local file path specified as a string
- filter :: A regular expression used to match the files and directories to be
downloaded
**** Example
#+begin_src javascript
'use strict';
// Example of using the downloadDir() method to upload a directory
// to a remote SFTP server
const path = require('path');
const SftpClient = require('../src/index');
const dotenvPath = path.join(__dirname, '..', '.env');
require('dotenv').config({path: dotenvPath});
const config = {
host: process.env.SFTP_SERVER,
username: process.env.SFTP_USER,
password: process.env.SFTP_PASSWORD,
port: process.env.SFTP_PORT || 22
};
async function main() {
const client = new SftpClient('upload-test');
const dst = '/tmp';
const src = '/home/tim/upload-test';
try {
await client.connect(config);
client.on('download', info => {
console.log(`Listener: Download ${info.source}`);
});
let rslt = await client.downloadDir(src, dst);
return rslt;
} finally {
client.end();
}
}
main()
.then(msg => {
console.log(msg);
})
.catch(err => {
console.log(`main error: ${err.message}`);
});
#+end_src
*** end() ==> boolean
Ends the current client session, releasing the client socket and associated
resources. This function also removes all listeners associated with the client.
**** Example Use
#+begin_src javascript
let client = new Client();
client.connect(config)
.then(() => {
// do some sftp stuff
})
.then(() => {
return client.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
*** Add and Remove Listeners
Although normally not required, you can add and remove custom listeners on the
ssh2 client object. This object supports a number of events, but only a few of
them have any meaning in the context of SFTP. These are
- error :: An error occurred. Calls listener with an error argument.
- end :: The socket has been disconnected. No argument.
- close :: The socket was closed.
**** on(eventType, listener)
Adds the specified listener to the specified event type. It the event type is
~error~, the listener should accept 1 argument, which will be an Error object.
The event handlers for =end= and =close= events have no arguments.
The handlers will be added to the beginning of the listener's event handlers, so
it will be called before any of the =ssh2-sftp-client= listeners.
**** removeListener(eventType, listener)
Removes the specified listener from the event specified in eventType. Note that
the ~end()~ method automatically removes all listeners from the client object.
* Platform Quirks & Warnings
** Server Capabilities
All SFTP servers and platforms are not equal. Some facilities provided by ~ssh2-sftp-client~ either depend on capabilities of the remote server or the
underlying capabilities of the remote server platform. As an example,
consider ~chmod()~. This command depends on a remote filesystem which
implements the 'nix' concept of users and groups. The /win32/ platform does
not have the same concept of users and groups, so ~chmod()~ will not behave
in the same way.
One way to determine whether an issue you are encountering is due to ~ssh2-sftp-client~ or due to the remote server or server platform is to use a
simple CLI sftp program, such as openSSH's sftp command. If you observe the
same behaviour using plain ~sftp~ on the command line, the issue is likely
due to server or remote platform limitations. Note that you should not use a
GUI sftp client, like ~Filezilla~ or ~winSCP~ as such GUI programs often
attempt to hide these server and platform incompatibilities and will take
additional steps to simulate missing functionality etc. You want to use a CLI
program which does as little as possible.
** Promises, Events & Managing Exceptions
One of the challenges in providing a Promise based API over a module like
SSH2, which is event based is how to ensure events are handled appropriately.
The challenge is due to the synchronous nature of events. You cannot use =try/catch= for events because you have no way of knowing when the event
might fire. For example, it could easily fire after your =try/catch= block as
completed execution.
Things become even more complicated once you mix in Promises. When you define
a promise, you have to methods which can be called to fulfil a promise, =resolve= and =reject=. Only one can be called - once you call =resolve=, you
cannot call =reject= (well, you can call it, but it won't have any impact on
the fulfilment status of the promise). The problem arises when an event, for
exmaple an =error= event is fired either after you have resolved a promise or
possibly in-between promises. If you don't catch the =error= event, your
script will likely crash with an =uncaught exception= error.
To make matters worse, some servers, particularly servers running on a
Windows platform, will raise multiple errors for the same error /event/. For
example, when you attempt to connect with a bad username or password, you
will get a =All authentication methods have failed= exception. However, under
Windows, you will also get a =Connection reset by peer= exception. If we
reject the connect promise based on the authentication failure exception,
what do we do with the =reset by peer= exception? More critically, what will
handle that exception given the promise has already been fulfilled and
completed? To make matters worse, it seems that Windows based servers also
raise an error event for /non-errors/. For example, when you call the =end()=
method, the connection is closed. On windows, this also results in a /connection reset by peer/ error. While it could be argued that the remote
server resetting the connection after receiving a disconnect request is not
an error, it doesn't change the fact that one is raised and we need to
somehow deal with it.
To handle this, =ssh2-sftp-client= implements a couple of strategies.
Firstly, when you call one of the module's methods, it adds =error=, =end=
and =close= event listeners which will call the =reject= moethod on the
enclosing promise. It also keeps track of whether an error has been handled
and if it has, it ignores any subsequent errors until the promise ends.
Typically, the first error caught has the most relevant information and any
subsequent error events are less critical or informative, so ignoring them
has no negative impact. Provided one of the events is raised before the
promise is fulfilled, these handlers will consume the event and deal with it
appropriately.
In testing, it was found that in some situations, particularly during connect
operations, subsequent errors fired with a small delay. This prevents the
errors from being handled by the event handlers associated with the connect
promise. To deal with this, a small 500ms delay has been added to the
connect() method, which effectively delays the removal of the event handlers
until all events have been caught.
The other area where additional events are fired is during the end() call. To
deal with these events, the =end()= method setus up listeners which will
simply ignore additional =error=, =end= and =close= events. It is assumed
that once you have called =end()= you really only care about any main error
which occurs and no longer care about other errors that may be raised as the
connection is terminated.
In addition to the promise based event handlers, =ssh2-sftp-client= also
implements global event handlers which will catch any =error=, =end= or =close= events. Essentially, these global handlers only reset the =sftp=
property of the client object, effectively ensuring any subsequent calls are
rejected and in the case of an error, send the error to the console.
*** Adding Custom Handlers
While the above strategies appear to work for the majority of use cases,
there are always going to be edge cases which require more flexible or
powerful event handling. To support this, the =on()= and =removeListener()=
methods are provided. Any event listener added using the =on()= method will
be added at the beginning of the list of handlers for that event, ensuring
it will be called before any global or promise local events. See the
documentation for the =on()= method for details.
** Windows Based Servers
It appears that when the sftp server is running on Windows, a /ECONNRESET/
error signal is raised when the end() method is called. Unfortunately, this
signal is raised after a considerable delay. This means we cannot remove the
error handler used in the end() promise as otherwise you will get an uncaught
exception error. Leaving the handler in place, even though we will ignore
this error, solves that issue, but unfortunately introduces a new problem.
Because we are not removing the listener, if you re-use the client object for
subsequent connections, an additional error handler will be added. If this
happens more than 11 times, you will eventually see the Node warning about a
possible memory leak. This is because node monitors the number of error
handlers and if it sees more than 11 added to an object, it assumes there is
a problem and generates the warning.
The best way to avoid this issue is to not re-use client objects. Always
generate a new sftp client object for each new connection.
** Don't Re-use SftpClient Objects
Due to an issue with /ECONNRESET/ error signals when connecting to Windows
based SFTP servers, it is not possible to remove the error handler in the
end() method. This means that if you re-use the SftpClient object for
multiple connections e.g. calling connect(), then end(), then connect() etc,
you run the risk of multiple error handlers being added to the SftpClient
object. After 11 handlers have been added, Node will generate a possible
memory leak warning.
To avoid this problem, don't re-use SftpClient objects. Generate a new
SftpClient object for each connection. You can perform multiple actions with
a single connection e.g. upload multiple files, download multiple files etc,
but after you have called end(), you should not try to re-use the object with
a further connect() call. Create a new object instead.
* FAQ
** Remote server drops connections with only an end event
Many SFTP servers have rate limiting protection which will drop connections once
a limit has been reached. In particular, openSSH has the setting ~MaxStartups~,
which can be a tuple of the form =max:drop:full= where =max= is the maximum
allowed unauthenticated connections, =drop= is a percentage value which
specifies percentage of connections to be dropped once =max= connections has
been reached and =full= is the number of connections at which point all
subsequent connections will be dropped. e.g. =10:30:60= means allow up to 10
unauthenticated connections after which drop 30% of connection attempts until
reaching 60 unauthenticated connections, at which time, drop all attempts.
Clients first make an unauthenticated connection to the SFTP server to begin
negotiation of protocol settings (cipher, authentication method etc). If you are
creating multiple connections in a script, it is easy to exceed the limit,
resulting in some connections being dropped. As SSH2 only raises an 'end' event
for these dropped connections, no error is detected. The ~ssh2-sftp-client~ now
listens for ~end~ events during the connection process and if one is detected,
will reject the connection promise.
One way to avoid this type of issue is to add a delay between connection
attempts. It does not need to be a very long delay - just sufficient to permit
the previous connection to be authenticated. In fact, the default setting for
openSSH is =10:30:60=, so you really just need to have enough delay to ensure
that the 1st connection has completed authentication before the 11th connection
is attempted.
** How can I pass writable stream as dst for get method?
If the dst argument passed to the get method is a writeable stream, the remote
file will be piped into that writeable. If the writeable you pass in is a
writeable stream created with ~fs.createWriteStream()~, the data will be written
to the file specified in the constructor call to ~createWriteStream()~.
The writeable stream can be any type of write stream. For example, the below code
will convert all the characters in the remote file to upper case before it is
saved to the local file system. This could just as easily be something like a
gunzip stream from ~zlib~, enabling you to decompress remote zipped files as you
bring them across before saving to local file system.
#+begin_src javascript
'use strict';
// Example of using a writeable with get to retrieve a file.
// This code will read the remote file, convert all characters to upper case
// and then save it to a local file
const Client = require('../src/index.js');
const path = require('path');
const fs = require('fs');
const through = require('through2');
const config = {
host: 'arch-vbox',
port: 22,
username: 'tim',
password: 'xxxx'
};
const sftp = new Client();
const remoteDir = '/home/tim/testServer';
function toupper() {
return through(function(buf, enc, next) {
next(null, buf.toString().toUpperCase());
});
}
sftp
.connect(config)
.then(() => {
return sftp.list(remoteDir);
})
.then(data => {
// list of files in testServer
console.dir(data);
let remoteFile = path.join(remoteDir, 'test.txt');
let upperWtr = toupper();
let fileWtr = fs.createWriteStream(path.join(__dirname, 'loud-text.txt'));
upperWtr.pipe(fileWtr);
return sftp.get(remoteFile, upperWtr);
})
.then(() => {
return sftp.end();
})
.catch(err => {
console.error(err.message);
});
#+end_src
** How can I upload files without having to specify a password?
There are a couple of ways to do this. Essentially, you want to setup SSH keys
and use these for authentication to the remote server.
One solution, provided by @KalleVuorjoki is to use the SSH agent
process. *Note*: SSH_AUTH_SOCK is normally created by your OS when you load the
ssh-agent as part of the login session.
#+begin_src javascript
let sftp = new Client();
sftp.connect({
host: 'YOUR-HOST',
port: 'YOUR-PORT',
username: 'YOUR-USERNAME',
agent: process.env.SSH_AUTH_SOCK
}).then(() => {
sftp.fastPut(/* ... */)
}
#+end_src
Another alternative is to just pass in the SSH key directly as part of the
configuration.
#+begin_src javascript
let sftp = new Client();
sftp.connect({
host: 'YOUR-HOST',
port: 'YOUR-PORT',
username: 'YOUR-USERNAME',
privateKey: fs.readFileSync('/path/to/ssh/key')
}).then(() => {
sftp.fastPut(/* ... */)
}
#+end_src
** How can I connect through a Socks Proxy
This solution was provided by @jmorino.
#+begin_src javascript
import { SocksClient } from 'socks';
import SFTPClient from 'ssh2-sftp-client';
const host = 'my-sftp-server.net';
const port = 22; // default SSH/SFTP port on remote server
// connect to SOCKS 5 proxy
const { socket } = await SocksClient.createConnection({
proxy: {
host: 'my.proxy', // proxy hostname
port: 1080, // proxy port
type: 5, // for SOCKS v5
},
command: 'connect',
destination: { host, port } // the remote SFTP server
});
const client = new SFTPClient();
client.connect({
host,
sock: socket, // pass the socket to proxy here (see ssh2 doc)
username: '.....',
privateKey: '.....'
})
// client is connected
#+end_src
** Timeout while waiting for handshake or handshake errors
Some users have encountered the error 'Timeout while waiting for handshake' or
'Handshake failed, no matching client->server ciphers. This is often due to the
client not having the correct configuration for the transport layer algorithms
used by ssh2. One of the connect options provided by the ssh2 module is
~algorithm~, which is an object that allows you to explicitly set the key
exchange, ciphers, hmac and compression algorithms as well as server
host key used to establish the initial secure connection. See the SSH2
documentation for details. Getting these parameters correct usually resolves the
issue.
When encountering this type of problem, one worthwhile approach is to use
openSSH's CLI sftp program with the =-v= switch to raise loggin levels. This
will show you what algorithms the CLI is using. You can then use this
information to match the names with the accepted algorithm names documented in
the =ssh2= README to set the properties in the =algorithms= object.
** How can I limit upload/download speed
If you want to limit the amount of bandwidth used during upload/download of
data, you can use a stream to limit throughput. The following example was
provided by /kennylbj/. Note that there is a caveat that we must set the ~autoClose~ flag to false to avoid calling an extra ~_read()~ on a closed stream
that may cause _get Permission Denied error in ssh2-streams.
#+begin_src javascript
const Throttle = require('throttle');
const progress = require('progress-stream');
// limit download speed
const throttleStream = new Throttle(config.throttle);
// download progress stream
const progressStream = progress({
length: fileSize,
time: 500,
});
progressStream.on('progress', (progress) => {
console.log(progress.percentage.toFixed(2));
});
const outStream = createWriteStream(localPath);
// pipe streams together
throttleStream.pipe(progressStream).pipe(outStream);
try {
// set autoClose to false
await client.get(remotePath, throttleStream, { autoClose: false });
} catch (e) {
console.log('sftp error', e);
} finally {
await client.end();
}
#+end_src
** Connection hangs or fails for larger files
This was contributed by Ladislav Jacho. Thanks.
A symptom of this issue is that you are able to upload small files, but
uploading larger ones fail. You probably have an MTU/fragmentation problem. For
each network interface on both client and server set the MTU to 576, e.g.
=ifconfig eth0 mtu 576=. If that works, you need to find the largest MTU which
will work for your network. An MTU which is too small will adversely affect
throughput speed. A common value to use is an MTU of 1400.
For more explanation, see [[https://github.com/theophilusx/ssh2-sftp-client/issues/342][issue #342]].
* Examples
I have started collecting example scripts in the example directory of the
repository. These are mainly scripts I have put together in order to investigate
issues or provide samples for users. They are not robust, lack adequate error
handling and may contain errors. However, I think they are still useful for
helping developers see how the module and API can be used.
* Troubleshooting
The ~ssh2-sftp-client~ module is essentially a wrapper around the ~ssh2~ and
~ssh2-streams~ modules, providing a higher level ~promise~ based API. When you
run into issues, it is important to try and determine where the issue lies -
either in the ssh2-sftp-client module or the underlying ~ssh2~ and
~ssh2-streams~ modules. One way to do this is to first identify a minimal
reproducible example which reproduces the issue. Once you have that, try to
replicate the functionality just using the ~ssh2~ and ~ssh2-streams~ modules. If
the issue still occurs, then you can be fairly confident it is something related
to those later 2 modules and therefore and issue which should be referred to the
maintainer of that module.
The ~ssh2~ and ~ssh2-streams~ modules are very solid, high quality modules with
a large user base. Most of the time, issues with those modules are due to client
misconfiguration. It is therefore very important when trying to diagnose an
issue to also check the documentation for both ~ssh2~ and ~ssh2-streams~. While
these modules have good defaults, the flexibility of the ssh2 protocol means
that not all options are available by default. You may need to tweak the
connection options, ssh2 algorithms and ciphers etc for some remote servers. The
documentation for both the ~ssh2~ and ~ssh2-streams~ module is quite
comprehensive and there is lots of valuable information in the issue logs.
If you run into an issue which is not repeatable with just the ~ssh2~ and
~ssh2-streams~ modules, then please log an issue against the ~ssh2-sftp-client~
module and I will investigate. Please note the next section on logging issues.
Note also that in the repository there are two useful directories. The first is
the examples directory, which contain some examples of using ~ssh2-sftp-client~
to perform common tasks. A few minutes reviewing these examples can provide that
additional bit of detail to help fix any problems you are encountering.
The second directory is the validation directory. I have some very simple
scripts in this directory which perform basic tasks using only the ~ssh2~
modules (no ~ssh2-sftp-client~ module). These can be useful when
trying to determine if the issue is with the underlying ~ssh2~ module or
the ~ssh2-sftp-client~ wrapper module.
** Common Errors
There are some common errors people tend to make when using Promises or
Asyc/Await. These are by far the most common problem found in issues logged
against this module. Please check for some of these before logging your
issue.
*** Not returning the promise in a ~then()~ block
All methods in ~ssh2-sftp-client~ return a Promise. This means methods are
executed /asynchrnously/. When you call a method inside the ~then()~ block
of a promise chain, it is critical that you return the Promise that call
generates. Failing to do this will result in the ~then()~ block completing
and your code starting execution of the next ~then()~, ~catch()~ or ~finally()~ block before your promise has been fulfilled. For example, the
following will not do what you expect
#+begin_src javascript
sftp.connect(config)
.then(() => {
sftp.fastGet('foo.txt', 'bar.txt');
}).then(rslt => {
console.log(rslt);
sftp.end();
}).catch(e => {
console.error(e.message);
});
#+end_src
In the above code, the ~sftp.end()~ method will almost certainly be called
before ~sftp.fastGet()~ has been fulfilled (unless the /foo.txt/ file is
really small!). In fact, the whole promise chain will complete and exit even
before the ~sftp.end()~ call has been fulfilled. The correct code would be
something like
#+begin_src javascript
sftp.connect(config)
.then(() => {
return sftp.fastGet('foo.txt', 'bar.txt');
}).then(rslt => {
console.log(rslt);
return sftp.end();
}).catch(e => {
console.error(e.message);
});
#+end_src
Note the ~return~ statements. These ensure that the Promise returned by the
client method is returned into the promise chain. It will be this promise
the next block in the chain will wait on to be fulfilled before the next
block is executed. Without the return statement, that block will return the
default promise for that block, which essentially says /this block has been
fulfilled/. What you really want is the promise which says /your sftp client
method call has been fulfilled/.
A common symptom of this type of error is for file uploads or download to
fail to complete or for data in those files to be truncated. What is
happening is that the connection is being ended before the transfer has
completed.
*** Mixing Promise Chains and Async/Await
Another common error is to mix Promise chains and async/await calls. This is
rarely a great idea. While you can do this, it tends to create complicated
and difficult to maintain code. Select one approach and stick with it. Both
approaches are functionally equivalent, so there is no reason to mix up the
two paradigms. My personal preference would be to use async/await as I think
that is more /natural/ for most developers. For example, the following is
more complex and difficult to follow than necessary (and has a bug!)
#+begin_src javascript
sftp.connect(config)
.then(() => {
return sftp.cwd();
}).then(async (d) => {
console.log(`Remote directory is ${d}`);
try {
await sftp.fastGet(`${d}/foo.txt`, `./bar.txt`);
}.catch(e => {
console.error(e.message);
});
}).catch(e => {
console.error(e.message);
}).finally(() => {
sftp.end();
});
#+end_src
The main bug in the above code is the ~then()~ block is not returning the
Promise generated by the call to ~sftp.fastGet()~. What it is actually
returning is a fulfilled promise which says the ~then()~ block has been run
(note that the await'ed promise is not being returned and is therefore
outside the main Promise chain). As a result, the ~finally()~ block will be
executed before the await promise has been fulfilled.
Using async/await inside the promise chain has created unnecessary
complexity and leads to incorrect assumptions regarding how the code will
execute. A quick glance at the code is likely to give the impression that
execution will wait for the ~sftp.fastGet()~ call to be fulfilled before
continuing. This is not the case. The code would be more clearly expressed
as either
#+begin_src javascript
sftp.connect(config)
.then(() => {
return sftp.cwd();
}).then(d => {
console.log(`remote dir ${d}`);
return sftp.fastGet(`${d}/foot.txt`, 'bar.txt');
}).catch(e => {
console.error(e.message);
}).finally(() => {
return sftp.end();
});
#+end_src *or, using async/await*
#+begin_src javascript
async function doSftp() {
try {
let sftp = await sftp.connect(conf);
let d = await sftp.cwd();
console.log(`remote dir is ${d}`);
await sftp.fastGet(`${d}/foo.txt`, 'bat.txt');
} catch (e) {
console.error(e.message);
} finally () {
await sftp.end();
}
}
#+end_src
*** Try/catch and Error Handlers
Another common error is to try and use a try/catch block to catch event
signals, such as an error event. In general, you cannot use try/catch blocks
for asynchronous code and expect errors to be caught by the ~catch~ block.
Handling errors in asynchronous code is one of the key reasons we now have
the Promise and async/await frameworks.
The basic problem is that the try/catch block will have completed execution
before the asynchronous code has completed. If the asynchronous code has not
compleed, then there is a potential for it to raise an error. However, as
the try/catch block has already completed, there is no /catch/ waiting to
catch the error. It will bubble up and probably result in your script
exiting with an uncaught exception error.
Error events are essentially asynchronous code. You don't know when such
events will fire. Therefore, you cannot use a try/catch block to catch such
event errors. Even creating an error handler which then throws an exception
won't help as the key problem is that your try/catch block has already
executed. There are a number of alternative ways to deal with this
situation. However, the key symptom is that you see occasional uncaught
error exceptions that cause your script to exit abnormally despite having
try/catch blocks in your script. What you need to do is look at your code
and find where errors are raised asynchronously and use an event handler or
some other mechanism to manage any errors raised.
*** Server Differences
Not all SFTP servers are the same. Like most standards, the SFTP protocol
has some level of interpretation and allows different levels of compliance.
This means there can be differences in behaviour between different servers
and code which works with one server will not work the same with another.
For example, the value returned by /realpath/ for non-existent objects can
differ significantly. Some servers will throw an error for a particular
operation while others will just return null, some servers support
concurrent operations (such as used by fastGet/fastPut) while others will
not and of course, the text of error messages can vary significantly. In
particular, we have noticed significant differences across different
platforms. It is therefore advisable to do comprehensive testing when the
SFTP server is moved to a new platform. This includes moving from to a cloud
based service even if the underlying platform remains the same. I have
noticed that some cloud platforms can generate unexpected events, possibly
related to additional functionality or features associated with the cloud
implementation. For example, it appears SFTP servers running under Azure
will generate an error event when the connection is closed even when the
client has requested the connection be terminated. The same SFTP server
running natively on Windows does not appear to exhibit such behaviour.
*** Avoid Concurrent Operations
Technically, SFTP should be able to perform multiple operations
concurrently. As node is single threaded, what we a really talking about is
running multiple execution contexts as a pool where node will switch
contexts when each context is blocked due to things like waiting on network
data etc. However, I have found this to be extremely unreliable and of very
little benefit from a performance perspective. My recommendation is to
therefore avoid executing multiple requests over the same connection in
parallel (for example, generating multiple ~get()~ promises and using
something like ~Promise.all()~ to resolve them.
If you are going to try and perform concurrent operations, you need to test
extensively and ensure you are using data which is large enough that context
switching does occur (i.e. the request is not completed in a single run).
Some SFTP servers will handle concurrent operations better than others.
** Debugging Support
You can add a ~debug~ property to the config object passed in to ~connect()~ to
turn on debugging. This will generate quite a lot of output. The value of the
property should be a function which accepts a single string argument. For example;
#+begin_src javascript
config.debug = msg => {
console.error(msg);
};
#+end_src
Enabling debugging can generate a lot of output. If you use console.error() as
the output (as in the example above), you can redirect the output to a file
using shell redirection e.g.
#+begin_src shell
node script.js 2> debug.log
#+end_src
If you just want to see debug messages from ~ssh2-sftp-client~ and exclude debug
messages from the underlying ~ssh2~ and ~ssh2-streams~ modules, you can filter
based on messages which start with 'CLIENT' e.g.
#+begin_src javascript
{
debug: (msg) => {
if (msg.startsWith('CLIENT')) {
console.error(msg);
}
}
}
#+end_src
* Logging Issues
Please log an issue for all bugs, questions, feature and enhancement
requests. Please ensure you include the module version, node version and
platform.
I am happy to try and help diagnose and fix any issues you encounter while using
the ~ssh2-sftp-client~ module. However, I will only put in effort if you are
prepared to put in the effort to provide the information necessary to reproduce
the issue. Things which will help
- Node version you are using
- Version of ssh2-sftp-client you are using
- Platform your client is running on (Linux, macOS, Windows)
- Platform and software for the remote SFTP server when possible
- Example of your code or a minimal script which reproduces the issue you are
encountering. By far, the most common issue is incorrect use of the module
API. Example code can usually result in such issues being resolved very
quickly.
Perhaps the best assistance is a minimal reproducible example of the issue. Once
the issue can be readily reproduced, it can usually be fixed very quickly.
* Pull Requests
Pull requests are always welcomed. However, please ensure your changes pass all
tests and if you're adding a new feature, that tests for that feature are
included. Likewise, for new features or enhancements, please include any
relevant documentation updates.
*Note*: The =README.md= file is generated from the =README.org= file. Therefore,
any documentation updates or fixes need to be made to the =README.org= file.
This file is /tangled/ using =Emacs= org mode. If you don't use Emacs or
org-mode, don't be too concerned. The org-mode syntax is straight-forward and
similar to /markdown/. I will verify any updates to =README.org= and generate a
new =README.md= when necessary. The main point to note is that any changes made
directly to =README.md= will not persist and will be lost when a new version is
generated, so don't modify that file.
This module will adopt a standard semantic versioning policy. Please indicate in
your pull request what level of change it represents i.e.
- Major :: Change to API or major change in functionality which will require an
increase in major version number.
- Minor :: Minor change, enhancement or new feature which does not change
existing API and will not break existing client code.
- Bug Fix :: No change to functionality or features. Simple fix of an existing
bug.
* Contributors
This module was initially written by jyu213. On August 23rd, 2019, theophilusx
took over responsibility for maintaining this module. A number of other people
have contributed to this module, but until now, this was not tracked. My
intention is to credit anyone who contributes going forward.
Thanks to the following for their contributions -
- jyu213 :: Original author
- theophilusx :: Current maintainer
- henrytk :: Documentation fix
- waldyrious :: Documentation fixes
- james-pellow :: Cleanup and fix for connect method logic
- jhorbulyk :: Contributed posixRename() functionality
- teenangst :: Contributed fix for error code 4 in stat() method
- kennylbj :: Contributed example of using a throttle stream to limit
upload/download bandwidth.
- anton-erofeev :: Documentation fix
- Ladislav Jacho :: Contributed solution explanation for connections hanging
when transferring larger files.
- Emma Milner :: Contributed fix for put() bug
- Witni Davis :: Contributed PR to fix put() RCE when using 'finish' rather than
'close' to resolve promise
- Maik Marschner :: Contributed fix for connect() not returning sftp object.
Also included test to check for this regression in future.
- cakemasher :: Contributed fix for removeTempListeners().
Reference in New Issue View Git Blame Copy Permalink