introduce kni isolate rx queue support #695

wanlebing · 2021-01-03T10:52:42Z

introduce kni isolate rx queue support:

local ip filter will make input set fixed on ixgbe/i40e;
dip filter is not supported by ixgbe and i40e under the premise of local ip filter, which is support on mellanox;
use dip + dport + dst_port_mask filters to cover port range [0-65535] to replace dip filter on ixgbe/i40e;
recommend to use rte_eth_dev_filter_ctrl to config kni fdir for kni ip, rte_flow is not supported well on ixgbe;
recommend to use rte_flow to config rss queue region to exclude kni rx queue;
support mellanox(cx4/5)/ixgbe(82599ES)/i40e(X710/XL710);
support ipv4/ipv6 kni fdir;

include/netif.h

include/netdev_flow.h

anonymous-zx · 2021-01-14T10:38:33Z

请问一下：

独立kni rx队列对性能的提升有多少，这样做的主要目的是为了数据面和控制面分离吗？
我看到现有的操作是把struct kni_addr ip[NETIF_KNI_ADDR_MAX_NUM]里的ip流量全都导向kni queue，不知道我理解的有没有错？如果是这样的规则的话，配置vip的kni上的流量怎么处理?

wanlebing · 2021-01-14T12:39:18Z

请问一下：

独立kni rx队列对性能的提升有多少，这样做的主要目的是为了数据面和控制面分离吗？

我看到现有的操作是把struct kni_addr ip[NETIF_KNI_ADDR_MAX_NUM]里的ip流量全都导向kni queue，不知道我理解的有没有错？如果是这样的规则的话，配置vip的kni上的流量怎么处理?

是为了控制面和数据面分离，kni流量不会绕行worker，让BGP/health check/ssh等流量高优，worker busy的时候，不至于影响到BGP链接以及健康检查的流量，遇到过BGP邻居闪断的一些问题；
对，因为intel上的卡有个缺陷，下发了local ip的filter（ip + port粒度）以后，input set就固定了，ip粒度就不生效，为了向下兼容，就多加规则，把kni ip 的端口范围[0-65535]覆盖到，起到了kn ip粒度导流的作用，不过这里有个地方没更新，如果转发核个数不是2^n，端口无法覆盖完，这个我更新下；
配置vip的kni上的流量，怎么理解？是哪种模式？可能我没用过

wanlebing · 2021-01-14T12:42:36Z

请问一下：

独立kni rx队列对性能的提升有多少，这样做的主要目的是为了数据面和控制面分离吗？

我看到现有的操作是把struct kni_addr ip[NETIF_KNI_ADDR_MAX_NUM]里的ip流量全都导向kni queue，不知道我理解的有没有错？如果是这样的规则的话，配置vip的kni上的流量怎么处理?

说的是vip如果是kni ip？kni的流量会优先分流，业务流量走rss flow

sjaliang · 2021-01-15T05:12:14Z

这个patch对dpdk版本有要求吗需要至少哪个版本？ dpdk 17.11版本对rte_flow支持的不太好

wanlebing · 2021-01-18T11:02:26Z

这个patch对dpdk版本有要求吗需要至少哪个版本？ dpdk 17.11版本对rte_flow支持的不太好

只要是能支持配置的rss queue region的 rte_flow就行，我们这都是18.11.2，17.11确实没试过

wanlebing · 2021-03-21T12:36:45Z

1.add lock to protect the safty of netdev flow api.
2.add comment for ixgbe v6 filter: signature mode is essential for ipv6 filter, which math the first 4 bytes on ipv6 addr, this will cause some problems，for example: when you add a kni filter for fdbd:dc02:9:135::13, a pkt with dst of fdbd:dc02:9:135:0:13:0:1 will match previous kni filter.

ywc689 · 2021-06-29T10:03:11Z

conf/dpvs.conf.items

+    !    kni_ipaddress {
+    !       ipv4                <wan link ipv4 address>
+    !       ipv6                <wan link ipv6 address>
+    !    }
    }

    <init> device bond0 {


Is rx_queue_id needed to config in kni worker type?

ywc689 · 2021-06-29T10:16:11Z

include/kni.h

+ * 1. local ip filter will make input set fixed on ixgbe/i40e.
+ * 2. dip filter is not supported by ixgbe and i40e under the
+ *    premise of local ip filter.
+ * 3. use dip + dport + dst_port_mask filters to cover port range
+ *    [0-65535] to replace dip filter on ixgbe/i40e.
+ * 4. kni fdir filter support tcp and udp, icmp not supported.
+ * 5. if (fdir_conf.mask.dst_port_mask & pkt.dport) equal to an
+ *    element in the port_base_array, pkt will match kni fdir
+ *    filter and redirected to kni rx queue.


Is there a solution to support both tcp/udp and IP protocols? Somebody may prefer OSPF (IP protocol 89) to BGP（TCP) for ECMP routes.

flow支持ip粒度或者tcp/udp的，这里的注释是解释的ixgbe/i40e，intel卡有input set，一种filter/flow会固定input set，其他input set的filter/flow可能就不生效。

ywc689 · 2021-06-29T10:57:28Z

include/kni.h

+        && (dev->kni.rx_queue_id != NETIF_QUEUE_ID_INVALID))
+    {


&& (dev->kni.rx_queue_id != NETIF_QUEUE_ID_INVALID)) {

ywc689 · 2021-06-30T03:45:54Z

src/kni.c

+        addr.in.s_addr = kni_ip->in.s_addr;
+        RTE_LOG(INFO, Kni, "[%s] success to add kni fdir ipv4 filter "
+                "on port: %s for kni_ip: %s\n",
+                __func__, dev->name,
+                inet_ntop(AF_INET, &addr, dst, sizeof(dst)) ? dst: "");


addr.in.s_addr = kni_ip->in.s_addr isn't needed.

ywc689 · 2021-06-30T03:58:48Z

src/netif.c

+    int kni_addr_cnt;
+    struct kni_addr kni_ip[NETIF_KNI_ADDR_MAX_NUM]; /* ipv4 or ipv6 */
+


Could it be better to add flows with the command tool dpip? For example dpip flow add ... dev ....

ywc689 · 2021-06-30T05:56:19Z

src/netif.c

+        && dev->type == PORT_TYPE_GENERAL) {
+        return true;


Doesn't it support bonding devices?

也可以支持，需要在所有slave上下flow，内部没有用bond，所以做了判断；考虑bond，这里可能需要适配下

ywc689 · 2021-06-30T06:34:29Z

src/netif.c

+        if (fwd_mode == KNI_FWD_MODE_ISOLATE_RX) {
+            nb_rb = rte_eth_rx_burst(dev->id, dev->kni.rx_queue_id,
+                                     mbufs, NETIF_MAX_PKT_BURST);
+        } else {
+            nb_rb = rte_ring_dequeue_burst(dev->kni.rx_ring, (void**)mbufs,
+                                           NETIF_MAX_PKT_BURST, NULL);
+        }


Some packets are sent to kni from dpvs's protocol stack. I don't think the flow based kni rx can handle all these packets.

ywc689 · 2021-06-30T07:15:44Z

src/netdev_flow.c

+    case NETDEV_FLOW_TYPE_RSS:
+        /* setup rss queues info */
+        netdev_flow_add_ingress_attribute(netdev_flow, &attr);
+        netdev_flow_add_rss_patterns(netdev_flow, patts);
+        netdev_flow_add_rss_actions(port_id, netdev_flow, acts);
+        break;


Does ixgbe devices support rss flow type? How does its performance compared to the global RSS?

ixgbe支持rss flow，测试看性能没有明显区别；ixgbe上用ip粒度的rte flow，可能会不生效，因为ip + port粒度的local ip filter会让ixgbe input set固定，ixgbe上想实现kni 独立接收，可能用port range的方式覆盖所有端口比较合适。

wanlebing force-pushed the kni_isolate_rx branch 3 times, most recently from 5f36834 to a9fcd98 Compare January 3, 2021 11:09

wanlebing closed this Jan 3, 2021

wanlebing reopened this Jan 3, 2021

wanlebing force-pushed the kni_isolate_rx branch 3 times, most recently from a2c49fe to e5b6d6d Compare January 3, 2021 11:53

ywc689 requested review from ywc689 and anonymous-zx and removed request for ywc689 January 5, 2021 06:29

ywc689 self-assigned this Jan 5, 2021

ywc689 self-requested a review January 5, 2021 06:29

anonymous-zx added the pr/to-review-codes review codes line by line and check if problem exists. label Jan 7, 2021

anonymous-zx reviewed Jan 14, 2021

View reviewed changes

include/netif.h Show resolved Hide resolved

anonymous-zx reviewed Jan 14, 2021

View reviewed changes

include/netdev_flow.h Show resolved Hide resolved

wanlebing closed this Jan 14, 2021

wanlebing reopened this Jan 14, 2021

ywc689 added pr/needs-confirmed the feature in the pr is what we need，and list what cases should be checked in later stages and removed pr/to-confirm-needs consider whether the feature of pr is needed labels Jan 19, 2021

wanlebing requested a review from anonymous-zx January 27, 2021 06:30

wanlebing force-pushed the kni_isolate_rx branch 2 times, most recently from 05d61dc to 4c8dc61 Compare March 21, 2021 12:30

introduce kni isolate rx queue support

fbf9245

wanlebing force-pushed the kni_isolate_rx branch from 4c8dc61 to fbf9245 Compare March 21, 2021 12:31

Merge branch 'devel' into kni_isolate_rx

ab0d8d6

ywc689 reviewed Jun 30, 2021

View reviewed changes

ywc689 mentioned this pull request Jan 21, 2022

kni rx isolation using rte_flow #794

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

introduce kni isolate rx queue support #695

introduce kni isolate rx queue support #695

wanlebing commented Jan 3, 2021 •

edited

Loading

anonymous-zx commented Jan 14, 2021 •

edited

Loading

wanlebing commented Jan 14, 2021 •

edited

Loading

wanlebing commented Jan 14, 2021 •

edited

Loading

sjaliang commented Jan 15, 2021

wanlebing commented Jan 18, 2021

wanlebing commented Mar 21, 2021 •

edited

Loading

ywc689 Jun 29, 2021

ywc689 Jun 29, 2021

wanlebing Oct 21, 2021

ywc689 Jun 29, 2021

ywc689 Jun 30, 2021

ywc689 Jun 30, 2021

ywc689 Jun 30, 2021

wanlebing Oct 21, 2021

ywc689 Jun 30, 2021

ywc689 Jun 30, 2021

wanlebing Oct 21, 2021

		int kni_addr_cnt;
		struct kni_addr kni_ip[NETIF_KNI_ADDR_MAX_NUM]; /* ipv4 or ipv6 */

introduce kni isolate rx queue support #695

Are you sure you want to change the base?

introduce kni isolate rx queue support #695

Conversation

wanlebing commented Jan 3, 2021 • edited Loading

anonymous-zx commented Jan 14, 2021 • edited Loading

wanlebing commented Jan 14, 2021 • edited Loading

wanlebing commented Jan 14, 2021 • edited Loading

sjaliang commented Jan 15, 2021

wanlebing commented Jan 18, 2021

wanlebing commented Mar 21, 2021 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

wanlebing commented Jan 3, 2021 •

edited

Loading

anonymous-zx commented Jan 14, 2021 •

edited

Loading

wanlebing commented Jan 14, 2021 •

edited

Loading

wanlebing commented Jan 14, 2021 •

edited

Loading

wanlebing commented Mar 21, 2021 •

edited

Loading