FlyLog 脚本说明 1.遥测项目设置 set crsf_telemetry_mode = CUSTOM set crsf_telemetry_sensors = 3,43,4,5,6,60,15,50,52,93,90,27,28,21,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 set crsf_telemetry_link_rate = 500 set crsf_telemetry_link_ratio = 8
2.安装脚本 复制widget-flylog文件夹到遥控器的scripts文件夹； 主页面下，单击DISP按键，添加一个全屏的页面； 点击更换控件，在弹出的页面选择FlyLog脚本。
3.添加传感器 主页面下，单击MDL按键，单击[遥测]图标，打开[发现新传感器]开关。
4.CH5为解锁通道，+100方向为解锁
LogCurve 脚本说明 1.安装脚本 复制tool-logcurve文件夹到遥控器的scripts文件夹；
2.操作 波轮：逆时针、顺时针移动光标；单击确认 DISP按键：切换曲线X轴缩放值 MDL按键：返回上一层 RTN按键：退出脚本
注：脚本记录是FlyLog脚本，所以需要先安装FlyLog脚本。
FlyLog script description
-
Telemetry project settings set crsf_telemetry_mode = CUSTOM set crsf_telemetry_sensors = 3,43,4,5,6,60,15,50,52,93,90,27,28,21,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 set crsf_telemetry_link_rate = 500 set crsf_telemetry_link_ratio = 8
-
Install the script Copy the widget-flylog folder to the scripts folder of the remote controller; On the main page, click the DISP button to add a full-screen page; Click Change Widget and select the FlyLog script on the pop-up page.
-
Add sensor On the main page, click the MDL button, click the [Telemetry] icon, and turn on the [Discover new sensor] switch.
-
CH5 is the unlock channel, and the +100 direction is unlock
LogCurve script description
-
Install the script Copy the tool-logcurve folder to the scripts folder of the remote controller;
-
Operation Wheel: Move the cursor counterclockwise and clockwise; click to confirm DISP button: Switch the X-axis scaling value of the curve MDL button: Return to the previous layer RTN button: Exit the script
Note: The script record is the FlyLog script, so you need to install the FlyLog script first.