Wenxun Dai😎, Ling-Hao Chen😎, Jingbo Wang🥳, Jinpeng Liu😎, Bo Dai🥳, Yansong Tang😎
😎Tsinghua University, 🥳Shanghai AI Laboratory (Correspondence: Jingbo Wang and Bo Dai).
This work introduces MotionLCM, extending controllable motion generation to a real-time level. Existing methods for spatial-temporal control in text-conditioned motion generation suffer from significant runtime inefficiency. To address this issue, we first propose the motion latent consistency model (MotionLCM) for motion generation, building upon the latent diffusion model. By adopting one-step (or few-step) inference, we further improve the runtime efficiency of the motion latent diffusion model for motion generation. To ensure effective controllability, we incorporate a motion ControlNet within the latent space of MotionLCM and enable explicit control signals (e.g., initial poses) in the vanilla motion space to further provide supervision for the training process. By employing these techniques, our approach can generate human motions with text and control signals in real-time. Experimental results demonstrate the remarkable generation and controlling capabilities of MotionLCM while maintaining real-time runtime efficiency.
- [2024/12/12] Release MotionLCM-V2 and Hugging Face Blog.
- [2024/08/15] Support the training of motion latent diffusion model (MLD).
- [2024/08/09] Support the training of motion VAE.
- [2024/07/02] MotionLCM is officially accepted by ECCV 2024.
- [2024/05/01] Upload paper and release code.
This section provides a quick start guide to set up the environment and run the demo. The following steps will guide you through the installation of the required dependencies, downloading the pretrained models, and preparing the datasets.
1. Conda environment
conda create python=3.10.12 --name motionlcm
conda activate motionlcm
Install the packages in requirements.txt.
pip install -r requirements.txt
We test our code on Python 3.10.12 and PyTorch 1.13.1.
2. Dependencies
If you have the sudo permission, install ffmpeg for visualizing stick figure (if not already installed):
sudo apt update
sudo apt install ffmpeg
ffmpeg -version # check!
If you do not have the sudo permission to install it, please install it via conda:
conda install conda-forge::ffmpeg
ffmpeg -version # check!
Run the following command to install git-lfs:
conda install conda-forge::git-lfs
Run the script to download dependencies materials:
bash prepare/download_glove.sh
bash prepare/download_t2m_evaluators.sh
bash prepare/prepare_t5.sh
bash prepare/download_smpl_models.sh
3. Pretrained models
Run the script to download the pre-trained models:
bash prepare/download_pretrained_models.sh
The folders experiments_recons experiments_t2m and experiments_control store pre-trained models for motion reconstruction, text-to-motion and motion control respectively.
4. (Optional) Download manually
Visit the Google Driver to download the previous dependencies and models.
5. Prepare the datasets
Please refer to HumanML3D for text-to-motion dataset setup. Copy the result dataset to our repository:
cp -r ../HumanML3D/HumanML3D ./datasets/humanml3d
6. Folder Structure
After the whole setup pipeline, the folder structure will look like:
MotionLCM
├── configs
├── configs_v1
├── datasets
│ ├── humanml3d
│ │ ├── new_joint_vecs
│ │ ├── new_joints
│ │ ├── texts
│ │ ├── Mean.npy
│ │ ├── Std.npy
│ │ ├── ...
│ └── humanml_spatial_norm
│ ├── Mean_raw.npy
│ └── Std_raw.npy
├── deps
│ ├── glove
│ ├── sentence-t5-large
| ├── smpl_models
│ └── t2m
├── experiments_control
│ ├── spatial
│ │ └── motionlcm_humanml
│ │ ├── motionlcm_humanml_s_all.ckpt
│ │ └── motionlcm_humanml_s_pelvis.ckpt
│ └── temproal
│ │ └── motionlcm_humanml
│ │ ├── motionlcm_humanml_t_v1.ckpt
│ │ └── motionlcm_humanml_t.ckpt
├── experiments_recons
│ └── vae_humanml
│ └── vae_humanml.ckpt
├── experiments_t2m
│ ├── mld_humanml
│ │ ├── mld_humanml_v1.ckpt
│ │ └── mld_humanml.ckpt
│ └── motionlcm_humanml
│ ├── motionlcm_humanml_v1.ckpt
│ └── motionlcm_humanml.ckpt
├── ...
MotionLCM provides three main functionalities: motion reconstruction, text-to-motion and motion control. The following commands demonstrate how to use the pre-trained models to generate motions. The outputs will be stored in ${cfg.TEST_FOLDER} / ${cfg.NAME} / demo_${timestamp} (experiments_t2m_test/motionlcm_humanml/demo_2024-04-06T23-05-07).
If you haven't completed the data preparation in 👨🏫 Quick Start, make sure to use the following command to download a tiny humanml3d dataset.
bash prepare/prepare_tiny_humanml3d.sh
1. Motion Reconstruction (using GT motions from HumanML3D test set)
python demo.py --cfg configs/vae.yaml
2. Text-to-Motion (using provided prompts and lengths in `demo/example.txt`)
python demo.py --cfg configs/mld_t2m.yaml --example assets/example.txt
python demo.py --cfg configs/motionlcm_t2m.yaml --example assets/example.txt
3. Text-to-Motion (using prompts from HumanML3D test set)
python demo.py --cfg configs/mld_t2m.yaml
python demo.py --cfg configs/motionlcm_t2m.yaml
4. Motion Control (using prompts and trajectory from HumanML3D test set)
The following command is for MotionLCM with motion ControlNet.
python demo.py --cfg configs/motionlcm_control_s.yaml
The following command is for MotionLCM with consistency latent tuning (CLT).
python demo.py --cfg configs/motionlcm_t2m_clt.yaml --optimize
5. Render SMPL
After running the demo, the output folder will store the stick figure animation for each generated motion (e.g., assets/example.gif).
To record the necessary information about the generated motion, a pickle file with the following keys will be saved simultaneously (e.g., assets/example.pkl):
joints (numpy.ndarray): The XYZ positions of the generated motion with the shape of(nframes, njoints, 3).text (str): The text prompt.length (int): The length of the generated motion.hint (numpy.ndarray): The trajectory for motion control (optional).
5.1 Create SMPL meshes
To create SMPL meshes for a specific pickle file, let's use assets/example.pkl as an example:
python fit.py --pkl assets/example.pkl
The SMPL meshes (numpy array) will be stored in assets/example_mesh.pkl with the shape (nframes, 6890, 3).
You can also fit all pickle files within a folder. The code will traverse all .pkl files in the directory and filter out files that have already been fitted.
python fit.py --dir assets/
5.2 Render SMPL meshes
Refer to TEMOS-Rendering motions for blender setup (only Installation section).
We support three rendering modes for SMPL mesh, namely sequence (default), video and frame.
5.2.1 sequence
YOUR_BLENDER_PATH/blender --background --python render.py -- --pkl assets/example_mesh.pkl --mode sequence --num 8
You will get a rendered image of num=8 keyframes as shown in assets/example_mesh.png. The darker the color, the later the time.
5.2.2 video
YOUR_BLENDER_PATH/blender --background --python render.py -- --pkl assets/example_mesh.pkl --mode video --fps 20
You will get a rendered video with fps=20 as shown in assets/example_mesh.mp4.
5.2.3 frame
YOUR_BLENDER_PATH/blender --background --python render.py -- --pkl assets/example_mesh.pkl --mode frame --exact_frame 0.5
You will get a rendered image of the keyframe at exact_frame=0.5 (i.e., the middle frame) as shown in assets/example_mesh_0.5.png.
We provide the training guidance for motion reconstruction, text-to-motion and motion control tasks. The following steps will guide you through the training process.
1. Important args in the config yaml
The parameters required for model training and testing are recorded in the corresponding YAML file (e.g., configs/motionlcm_t2m.yaml). Below are some of the important parameters in the file:
${FOLDER}: The folder for the specific training task (i.e.,experiments_recons,experiments_t2mandexperiments_control).${TEST_FOLDER}: The folder for the specific testing task (i.e.,experiments_recons_test,experiments_t2m_testandexperiments_control_test).${NAME}: The name of the model (e.g.,motionlcm_humanml).${FOLDER},${NAME}, and the current timestamp constitute the training output folder (for example,experiments_t2m/motionlcm_humanml/2024-04-06T23-05-07). The same applies to${TEST_FOLDER}for testing.${TRAIN.PRETRAINED}: The path of the pre-trained model.${TEST.CHECKPOINTS}: The path of the testing model.
2. Train motion VAE and MLD
Please update the parameters in configs/vae.yaml and configs/mld_t2m.yaml. Then, run the following commands:
python -m train_vae --cfg configs/vae.yaml
python -m train_mld --cfg configs/mld_t2m.yaml
3. Train MotionLCM and motion ControlNet
Please first check the parameters in configs/motionlcm_t2m.yaml. Then, run the following command:
python -m train_motionlcm --cfg configs/motionlcm_t2m.yaml
Please update the parameters in configs/motionlcm_control_s.yaml. Then, run the following command:
python -m train_motion_control --cfg configs/motionlcm_control_s.yaml
This command by default uses the Pelvis joint for motion control training. If you want to utilize all the joints defined in OmniControl (i.e., Pelvis, Left foot, Right foot, Head, Left wrist, and Right wrist), you need to modify the TRAIN_JOINTS in DATASET.HUMANML3D.CONTROL_ARGS in the configs/motionlcm_control_s.yaml.
TRAIN_JOINTS: [0] -> [0, 10, 11, 15, 20, 21]
This is also the reason we provide two checkpoints for testing in experiments_control/spatial/motionlcm_humanml.
CHECKPOINTS: 'experiments_control/spatial/motionlcm_humanml/motionlcm_humanml_s_pelvis.ckpt' # Trained on Pelvis
CHECKPOINTS: 'experiments_control/spatial/motionlcm_humanml/motionlcm_humanml_s_all.ckpt' # Trained on All
During validation, the default testing joint is Pelvis, and the testing density is 100.
TEST_JOINTS: [0] # choice -> [0], [10], [11], [15], [20], [21] (ONLY when trained on all)
TEST_DENSITY: 100 # choice -> [100, 25, 5, 2, 1]
TEST_DENSITY refers to the density level of control points selected from the ground truth (GT) trajectory.
Specifically, 100 and 25 correspond to percentage, while 5, 2, and 1 correspond to number. The logic of the code is as follows:
# MotionLCM/mld/data/humanml/dataset.py (Text2MotionDataset)
length = joints.shape[0]
density = self.testing_density
if density in [1, 2, 5]:
choose_seq_num = density
else:
choose_seq_num = int(length * density / 100)4. Evaluate the models
python -m test --cfg configs/vae.yaml
python -m test --cfg configs/mld_t2m.yaml
python -m test --cfg configs/motionlcm_t2m.yaml
If you want to change the number of inference steps, change the num_inference_steps in the following configs:
configs/modules/scheduler_ddim.yaml # MLD
configs/modules/scheduler_lcm.yaml # MotionLCM
The following command is for MotionLCM with motion ControlNet.
python -m test --cfg configs/motionlcm_control_s.yaml
The following command is for MotionLCM with consistency latent tuning (CLT).
python -m test --cfg configs/motionlcm_t2m_clt.yaml --optimize
For CLT, we default to using num_inference_steps=1 and batch_size=1. Do not modify these two parameters.
For our default motion control test (i.e., simply run the commands above), it is based on the pelvis joint with density=100. If you want to obtain complete results, please adjust the testing joint and testing density according to the motion control training tutorial.
We provide the quantitative and qualitative results in the paper.
Text-to-Motion (quantitative)
Text-to-Motion (qualitative)
TBD
Motion Control (quantitative)
TBD
We would like to thank the authors of the following repositories for their excellent work: MLD, latent-consistency-model, OmniControl, TEMOS, HumanML3D, UniMoCap, joints2smpl.
If you find this work useful, please consider citing our paper:
@article{motionlcm,
title={MotionLCM: Real-time Controllable Motion Generation via Latent Consistency Model},
author={Dai, Wenxun and Chen, Ling-Hao and Wang, Jingbo and Liu, Jinpeng and Dai, Bo and Tang, Yansong},
journal={arXiv preprint arXiv:2404.19759},
year={2024},
}This code is distributed under an MotionLCM LICENSE, which not allowed for commercial usage. Note that our code depends on other libraries and datasets which each have their own respective licenses that must also be followed.
If you have any question, please contact at Wenxun Dai and cc to Ling-Hao Chen and Jingbo Wang.