BIP:
Title: ChillDKG: Distributed Key Generation for FROST
Author: Tim Ruffing <[email protected]>
        Jonas Nick <[email protected]>
Status: Draft
License: CC0-1.0
License-Code: MIT
Type: Informational
Created:
Post-History:
Comments-URI:

ChillDKG: Distributed Key Generation for FROST

Abstract

This Bitcoin Improvement Proposal proposes ChillDKG, a distributed key generation protocol (DKG) for use with the FROST Schnorr threshold signature scheme.

Copyright

This document is made available under CC0 1.0 Universal. The accompanying source code is licensed under the MIT license.

Introduction

Motivation

The FROST signature scheme [KG20, CKM21, BTZ21, CGRS23] enables t-of-n Schnorr threshold signatures, in which some threshold t of a group of n participants is required to produce a signature. FROST remains unforgeable as long as at most t-1 participants are compromised and remain functional as long as t honest participants do not lose their secret key material. Notably, FROST can be made compatible with BIP 340 Schnorr signatures and does not put any restrictions on the choice of t and n (as long as 1 <= t <= n).¹

As a result, threshold signatures increase both security and availability, enabling users to escape the inherent dilemma between the contradicting goals of protecting a single secret key against theft and data loss simultaneously. Before being able to create signatures, the participants need to generate a shared threshold public key (representing the entire group with its t-of-n policy), together with n corresponding secret shares (held by the n participants) that allow to sign under the threshold public key. This key generation can, in principle, be performed by a trusted dealer who takes care of generating the threshold public key as well as all n secret shares, which are then distributed to the n participants via secure channels. However, the trusted dealer constitutes a single point of failure: a compromised dealer can forge signatures arbitrarily.

An interactive distributed key generation (DKG) protocol session by all participants avoids the need for a trusted dealer. There exist a number of DKG protocols with different requirements and guarantees in the cryptographic literature. Most suitable for the use with FROST is the PedPop DKG protocol [KG20, CKM21, CGRS23] ("Pedersen DKG [Ped92, GJKR07] with proofs of possession"), which, like FROST, does not impose restrictions on the choice of t and n.

But similar to most DKG protocols in the literature, PedPop has strong requirements on the communication channels between participants, which make it difficult to deploy in practice: First, it assumes that participants have secure (i.e., authenticated and encrypted) channels between each other, which is necessary to avoid man-in-the-middle attacks and to ensure confidentiality of secret shares when delivering them to individual participants. Second, PedPop assumes that all participants have access to some external consensus or reliable broadcast mechanism that ensures they have an identical view of the protocol messages exchanged during DKG. This will, in turn, ensure that all participants eventually reach agreement over the results of the DKG, which include not only parameters such as the generated threshold public key but also whether the DKG has succeeded at all.

To understand the necessity of reaching agreement, consider the example of a DKG to set up a 2-of-3 Bitcoin wallet in which two participants are honest but the third participant is malicious. The malicious participant sends invalid secret shares to the first honest participant, but valid shares to the second honest participant. While the first honest participant cannot finish the DKG, the second honest participant will believe that the DKG has finished successfully and thus may be willing to send funds to the resulting threshold public key. But this constitutes a catastrophic failure: Those funds will be lost irrevocably because the single remaining secret share of the second participant will not be sufficient to produce a signature (without the help of the malicious participant).²

To sum up, there is currently no description of PedPop that does not assume the availability of external secure channels and consensus and thus can be turned into a standalone implementation. To overcome these issues, we propose ChillDKG in this BIP. ChillDKG is a variant of PedPop with "batteries included", i.e., it incorporates minimal but sufficient implementations of secure channels and consensus and thus does not have external dependencies. This makes it easy to implement and deploy, and we provide detailed algorithmic specifications in the form of Python code.

Design

We assume a network setup in which participants have point-to-point connections to an untrusted coordinator. This will enable bandwidth optimizations and is common also in implementations of the signing stage of FROST. Participants are identified and authenticated via long-term public keys.

The basic building block of ChillDKG is the SimplPedPop protocol (a simplified variant of PedPop), which has been designed specifically for FROST. SimplPedPop is proven to be secure when combined with FROST [CGRS23], and its output contains, in addition to the threshold public key, separate per-participant public shares thereof, which allow for partial verification of contributions in a FROST signing session.

Besides external secure channels, SimplPedPop depends on an external equality check protocol. The equality check protocol serves as an abstraction of a consensus mechanism: Its only purpose is to check that, at the end of SimplPedPop, all participants have received identical protocol messages.

Our goal is to turn SimplPedPop into a standalone DKG protocol without external dependencies. We then follow a modular approach that removes one dependency at a time. First, we take care of secure channels by wrapping SimplPedPop in a protocol EncPedPop, which relies on pairwise ECDH key exchanges between the participants to encrypt secret shares. Finally, we add a concrete equality check protocol CertEq to EncPedPop to obtain a standalone DKG protocol ChillDKG.

Our equality check protocol CertEq consists of every participant simply collecting a list of valid signatures on the session transcript from all n participants before finalizing the DKG session with some threshold public key as output. The list of signatures, also called a success certificate, can convince any other honest participant (ultimately at the time of a signing request) that the DKG session has indeed been successful. This is sufficient to exclude the catastrophic failure described in the previous section.

As an additional feature of ChillDKG, the DKG outputs for any signing device can be fully recovered from a backup of a single host secret key specific to the device, (the essential parts of) the public transcripts of the DKG sessions, and the corresponding success certificates. To simplify the interface, we combine the transcript data and the session certificate into a single byte string called the recovery data, which is common to all participants and does not need to be kept confidential. Recovering a device that has participated in a DKG session then requires just the device's host secret key and the recovery data, the latter of which can be obtained from any cooperative participant (or the coordinator) or from an untrusted backup provider.

ChillDKG outputs a threshold public key that can be safely used in Taproot outputs [BIP 341]. In contrast, a standard PedPop implementation would allow a malicious participant to secretly embed a Taproot commitment to a script path within the threshold public key. If such a key was used directly in a Taproot output, the malicious participant could spend the output through their hidden script path, bypassing the requirement for t - 1 additional signatures. While BIP 341 outlines special precautions for using threshold public keys generated by standard PedPop, ChillDKG eliminates this vulnerability entirely, providing built-in protection against accidental misuse.

If a ChillDKG session fails due to the participants or the coordinator deviating from the protocol, any aborting party will be able to identify and blame a single party responsible for the failure (assuming the network, and, depending on the circumstances, the coordinator, is reliable).

These features make ChillDKG usable in a wide range of applications. As a consequence of this broad applicability, there will necessarily be scenarios in which specialized protocols need less communication overhead and fewer rounds, e.g., when setting up multiple signing devices in a single location.

In summary, we aim for the following design goals:

• Standalone: ChillDKG is fully specified, requiring no external secure channels or consensus mechanism.
• Conditional agreement: If a ChillDKG session succeeds for one honest participant, this participant will be able to convince every other honest participant that the session has succeeded.
• No restriction on threshold: Like the FROST signing protocol, ChillDKG supports any threshold t <= n, including t > n/2 (also called "dishonest majority").
• Broad applicability: ChillDKG supports a wide range of scenarios, from those where the signing devices are owned and connected by a single individual to those where multiple owners manage the devices from distinct locations.
• Simple backups: ChillDKG allows recovering the DKG output using the host secret key and common recovery data shared among all participants and the coordinator. This eliminates the need for session-specific backups, simplifying user experience.
• Untrusted coordinator: Like FROST, ChillDKG uses a coordinator that relays messages between the participants. This simplifies the network topology, and the coordinator additionally reduces communication overhead by aggregating some of the messages. A faulty coordinator can force the DKG to fail but cannot negatively affect the security of the DKG.
• Per-participant public shares: ChillDKG supports partial signature verification in FROST signing sessions.
• Taproot-safe threshold public key: ChillDKG prevents malicious participants from embedding a hidden Taproot commitment to a script path in the threshold public key.
• Blame functionality: If a ChillDKG session aborts, it is possible to identify and blame a single party responsible for the failure (assuming the network, and, depending on the circumstances, the coordinator, is reliable).

In summary, ChillDKG incorporates solutions for both secure channels and consensus and simplifies backups in practice. As a result, it fits a wide range of application scenarios, and due to its low overhead, we recommend ChillDKG even if secure communication channels or a consensus mechanism (e.g., a BFT protocol or a reliable broadcast mechanism) are readily available.

Why Robustness is Not a Goal

Despite the blame functionality, ChillDKG does not provide robustness, i.e., the protocol is not designed to succeed in the presence of faulty participants. In fact, a single participant can cause the protocol to fail, either due to malicious intent, software bugs, or unreliable communication links. In such cases, users must investigate and resolve the issue before the DKG can output key material.

Adding robustness to ChillDKG would require the coordinator to exclude participants that appear unresponsive or faulty, which degrades the setup already from the beginning from t-of-n to (t-1)-of-(n-1). This approach is undesirable in most scenarios, as a faulty coordinator would have the power to exclude participants at will, and even if ChillDKG's design did not include a coordinator and participants had direct communication links to each other, it would be unclear how to achieve robustness in a dishonest majority setting.

Moreover, we believe that it is preferable to err on the side of caution even in the case of benign failures. For example, consider a key generation ceremony for a threshold cold wallet intended to store large amounts of Bitcoin. If it turns out that one of the devices participating appears non-responsive, e.g., due to a loss of network or a software bug, users will typically prefer security to progress, and abort the protocol instead of forcing successful termination of the ceremony by excluding the device from the DKG session. While warnings can be presented to users in this case, users tend to misunderstand and ignore them.

Even in distributed systems with strict liveness requirements, e.g., a system run by a large federation of nodes of which a majority is trusted, what is typically necessary for the liveness of the system is the continued ability to produce signatures. However, the setup of keys is typically performed in a one-time ceremony at the inception of the system (and possibly repeated in large time intervals, e.g., every few months). In other words, what is primarily required to ensure liveness in these applications is a robust signing protocol (and a solution for FROST exists [RRJSS22]), and not a robust DKG protocol.

Structure of this Document

Due to the complexity of ChillDKG, we do not provide both a pseudocode specification and a reference implementation. Instead, the BIP includes only a normative reference implementation in Python 3.12 (see python/chilldkg_ref/chilldkg.py), which serves as an executable specification.

To ease understanding of the design and reference code, we provide a technical overview of the internals of ChillDKG in Section "Internals of ChillDKG". For those who would like to use a ChillDKG implementation in their applications and systems, we explain the external interface and usage considerations of ChillDKG in Section "Usage of ChillDKG".

Internals of ChillDKG

This section provides a detailed technical overview of the internals of ChillDKG, which includes as building blocks the DKG protocols SimplPedPop and EncPedPop, and the equality check protocol CertEq. The contents of this section are purely informational and not strictly required to implement or use ChillDKG, and some details present in the normative Python reference implementation are omitted.

We stress that this document does not endorse the direct use of SimplPedPop or EncPedPop as DKG protocols. While SimplPedPop and EncPedPop may in principle serve as building blocks of other DKG protocols (e.g., for applications that already incorporate a consensus mechanism), this requires careful further consideration, which is not in the scope of this document. Consequently, implementations should not expose the algorithms of the building blocks as part of a high-level API, which is intended to be safe to use.

DKG Protocol SimplPedPop

(See python/chilldkg_ref/simplpedpop.py.)

The SimplPedPop protocol has been proposed by Chu, Gerhart, Ruffing, and Schröder [Section 4, CGRS23]. We make the following modifications as compared to the original SimplPedPop proposal:

• Every participant holds a secret seed, from which all required random values are derived deterministically using a pseudorandom function (based on tagged hashes [BIP 340]).
• Individual participants' public shares are added to the output of the DKG. This allows partial signature verification.
• The participants send VSS commitments to an untrusted coordinator instead of directly to each other. This lets the coordinator aggregate VSS commitments, which reduces communication costs. Nevertheless, if a session fails, participants are able to investigate who provided invalid secret shares by asking the coordinator for the other participants' individual contributions to their public share.
• To prevent a malicious participant from embedding a Taproot script path in the threshold public key, the participants tweak the VSS commitment such that the corresponding threshold public key has an unspendable script path.
• The proofs of knowledge are not included in the data for the equality check. This will reduce the size of the backups in ChillDKG. (TODO: This will be fixed in an updated version of the paper.)

Our variant of the SimplPedPop protocol then works as follows:

1. Every participant i (where i is an integer 0 <= i < n) creates a t-of-n sharing of a random secret scalar using Feldman Verifiable Secret Sharing (VSS), a variant of Shamir Secret Sharing. This involves generating random coefficients a_i[0], ..., a_i[t-1] of a polynomial f_i of degree t-1 in the scalar group:

   f_i(Z) = a_i[0] + a_i[1] * Z + ... a_i[t-1] * Z^(t-1)
   

   Here, f_i(0) = a_i[0] acts as the secret scalar to be shared. Participant i computes a VSS share shares[j] = f_i(j+1) for every participant j (including j = i), which is supposed to be sent to participant j in private. (This will be realized in EncPedPop using encryption.)

   Participant i then sends a VSS commitment, which is a vector com = (com[0], ..., com[t-1]) = (a_i[0] * G, ..., a_i[t-1] * G) of group elements, where G is the base point of the secp256k1 elliptic curve, and a BIP 340 Schnorr signature pop on message "i" with secret key a_i[0] to the coordinator. (The Schnorr signature acts as a proof of possession, i.e., it proves knowledge of the discrete logarithm of com[0] = a_i[0] * G. This avoids rogue-key attacks, also known as key cancellation attacks.)

2. Upon receiving coms[j] = (coms[j][0], ..., coms[j][t-1]) and pops[j] from every participant j, the coordinator aggregates the commitments by computing the component-wise sum of all coms[j] vectors except for their first components coms[j][0], which are simply concatenated (because the participants will need them to verify the proofs of possession):

   sum_coms_to_nonconst_terms = (coms[0][1] + ... + coms[n-1][1], ..., coms[0][t-1] + ... + coms[n-1][t-1])
   coms_to_secrets = (coms[0][0], ..., coms[n-1][0])
   

   The coordinator sends the vectors coms_to_secrets, sum_coms_to_nonconst_terms, and pops to every participant.

3. Upon receiving coms_to_secrets, sum_coms_to_nonconst_terms, and pops from the coordinator, every participant i verifies every signature pops[j] using message j and public key coms_to_secrets[j]. If any signature, say the one from participant j, is invalid, participant i aborts and blames participant j for the failure of the session.

   Otherwise, i.e., if all signatures are valid, participant i sums the components of coms_to_secrets, and prepends the sum to the sum_coms_to_nonconst_terms vector, resulting in a vector sum_coms. (Assuming the coordinator performed its computations correctly, the vector sum_coms is now the complete component-wise sum of the coms[j] vectors from every participant j. It acts as a VSS commitment to the sum f = f_0 + ... + f_{n-1} of the polynomials of all participants.)

   Participant i computes its public share pubshare as:

   pubshare = (i+1)^0 * sum_coms[0] + ... + (i+1)^(t-1) * sum_coms[t-1]
   

   Let partial_secshares be the vector of the VSS shares that participant i has privately obtained from each participant, and let secshare = partial_secshares[0] + ... + partial_secshares[n-1] be the sum of the vector components. Participant i checks the validity of secshare against sum_coms by checking if the equation secshare * G = pubshare holds. (secshare is supposed to be equal to f(i+1).)

   If the check fails, participant i aborts. Assuming the coordinator is honest and has sent a correct sums_coms vector, participant i knows that some participant contributed a wrong summand to secshare, but participant i does not have sufficient information to single out and blame the faulty participant. In this case, participant i can optionally investigate the error by asking the coordinator for the vector partial_pubshares defined as:

   partial_pubshares[j] = (i+1)^0 * coms[j][0] + ... + (i+1)^(t-1) * coms[j][t-1]
   

   With this vector at hand, participant i verifies each component of partial_secshares individually by checking for which participant j the equation partial_secshares[j] * G = partial_pubshares[j] does not hold. Participant i blames this participant j .

   Otherwise, i.e., in the successful case that the equation secshare * G = pubshare holds, participant i proceeds as follows. In order to obtain a threshold public key with an unspendable Taproot script path [BIP 341], participant i computes a Taproot tweak tweak for an unspendable script path, and adds the point tweak * G to sum_coms[0], resulting in a new VSS commitment called sum_coms_tweaked. Participant i computes the public share of every participant as

   pubshares[j] = (j+1)^0 * sum_coms_tweaked[0] + ... + (j+1)^(t-1) * sum_coms_tweaked[t-1]
   

   Correspondingly, participant i computes secshare_tweaked = secshare + tweak.

   Then, participant i sets the DKG output consisting of this participant's secret share secshare_tweaked, the threshold public key threshold_pubkey = sum_coms_tweaked[0], and all participants' public shares pubshares.

   As a final step, participant i enters a session of an external equality check protocol to verify that all participants agree on the transcript, i.e., common data produced during the session, and that none of them has aborted the session due to an invalid VSS share or an invalid proof of possession. The transcript of SimplPedPop, constructed in a variable eq_input, is simply the concatenation (of serializations) of t and the sum_coms vector. Upon the equality protocol returning successfully, participant i returns successfully with the DKG outputs as computed above. Details of the interface of the equality check protocol will be described further below in Subsection "Background on Equality Checks".

DKG Protocol EncPedPop

(See python/chilldkg_ref/encpedpop.py.)

EncPedPop is a thin wrapper around SimplPedPop that takes care of encrypting the VSS shares so that they can be sent over an insecure communication channel.

As in SimplPedPop, every EncPedPop participant holds a long-term secret seed. Every participant derives from this seed a static, long-term ECDH key pair consisting of a secret decryption key and a public encryption key. It is assumed that every participant has an authentic copy of every other participant's encryption key.

The encryption relies on ephemeral-static ECDH key exchange. Every participant derives from fresh randomness an ephemeral encryption nonce pair consisting of a secret nonce and the corresponding public nonce. This will enable every pair of sending participant i and recipient participant j != i to perform an ECDH key exchange between the ephemeral encryption nonce pair of participant i and the static encryption key pair of participant j in order to establish a shared secret pad pad_ij only known to participants i and j. The derivation of pad_ij from the raw ECDH output uses a tagged hash and includes additional context, namely the static encryption key and the index j of the recipient.³

When j = i (i.e., when a participant encrypts a VSS share for themselves), the computationally expensive ECDH key exchange is unnecessary. Instead, the participant repurposes the secret decryption key as a symmetric key, such that pad_ii is computed as the tagged hash of the decryption key, public encryption nonce, and context.

Every participant derives an ephemeral session seed passed down to SimplPedPop from their long-term seed and their public encryption nonce. Moreover, all encryption keys of all participants are included in the derivation to ensure that different sets of participants will have different SimplPedPop sessions, even in the case that the randomness for deriving the encryption nonce pair is accidentally reused.

EncPedPop then works like SimplPedPop with the following differences: Participant i will additionally transmit their public encryption nonce and an encrypted VSS share shares[j] + pad_ij for every other participant j as part of the first message to the coordinator. The coordinator collects all encrypted VSS shares, and computes the sum enc_secshare[i] of all shares intended for every participant i. The coordinator sends all public encryption nonces along with the sum enc_secshare[i] to participant i. Participant i stores the sum as enc_secshare, derives the pads pad_0i, ..., pad_ni as described above, obtains the value secshare = enc_secshare - (pad_0i + ... + pad_ni), and passes it down to SimplPedPop.

If SimplPedPop raises an error because this secshare value fails VSS verification, then participant i can optionally investigate the error by asking the coordinator for the vector enc_partial_secshares of the individual contributions of all participants to enc_secshare. Participant i obtains the vector partial_secshares, which SimplPedPop requires for investigating the error, by decrypting the components of enc_partial_secshares via partial_secshares[j] = enc_partial_secshares[j] - pad_ji for every other participant j. Then, participant i can pass partial_secshares down to SimplPedPop, which, after additionally obtaining the vector partial_pubshares from the coordinator, has all the information required to determine and blame a faulty participant.

Otherwise, i.e., if SimplPedPop does not raise an error, EncPedPop appends to the transcript eq_input of SimplPedPop the n public encryption nonces, and also all the n static encryption keys to ensure that the participants agree on their identities. The inclusion of the latter excludes man-in-the-middle attacks if Eq authenticates participants, e.g, if the Eq protocol messages are signed under long-term public keys of the participants.

Background on Equality Checks

As explained in the "Motivation" section, it is crucial for security that participants reach agreement over the results of a DKG session. SimplPedPop, and consequently also EncPedPop, ensure agreement during the final step of the DKG session by running an external equality check protocol Eq. The purpose of Eq is to verify that all participants have received an identical transcript, which is a byte string constructed by the respective DKG protocol.

Eq is assumed to be an interactive protocol between the n participants with the following abstract interface: Every participant can invoke a session of Eq with an input value eq_input. Eq may not return at all to the calling participant, but if it returns successfully to some participant, then all honest participants agree on the value eq_input. (However, it may be the case that not all honest participants have established this fact yet.) This means that the DKG session was successful, and the resulting threshold public key can be returned to the participant, who can use it, e.g., by sending funds to some Bitcoin address derived from it.

More formally, Eq must fulfill the following properties [CGRS23]:

• Integrity: If Eq returns successfully to some honest participant, then for every pair of input values eq_input and eq_input' provided by two honest participants, we have eq_input = eq_input'.
• Conditional Agreement: Assuming all messages are delivered eventually, if Eq returns successfully to some honest participant, then Eq will eventually return successfully to all honest participants.

Depending on the application scenario, different approaches may be suitable to implement Eq, such as a consensus protocol already available as part of a federated system or out-of-band communication. For example, in a scenario where a single user employs multiple signing devices to set up a threshold wallet, every device could display its value eq_input (or a hash of eq_input under a collision-resistant hash function) to the user. The user could manually verify the equality of the values by comparing the values shown on all displays, and confirm their equality by providing explicit confirmation to every device, e.g., by pressing a button on every device. Similarly, if signing devices are controlled by different organizations in different geographic locations, agents of these organizations could meet and compare the values. A detailed treatment of these out-of-band methods is out of scope of this document.

DKG Protocol ChillDKG

(See python/chilldkg_ref/chilldkg.py.)

Instead of performing an out-of-band check as the last step of the DKG, ChillDKG relies on a more direct approach: It is a wrapper around EncPedPop, which instantiates the required equality check protocol with a concrete in-band protocol CertEq. CertEq assumes that each participant holds a long-term key pair of a signature scheme, called the host key pair. ChillDKG repurposes the host key pairs as the ECDH key pairs required by EncPedPop,⁴ and it repurposes the host secret key as the seed required by EncPedPop.

ChillDKG requires that all participants have authentic copies of the other participants' host public keys.⁵ Authenticity of the host public keys can be verified through pairwise out-of-band comparisons between every pair of participants. This verification can occur at any time before the DKG session is finalized, in particular before the start of the session.

Equality Check Protocol CertEq

The CertEq protocol is straightforward:⁶ Every participant sends a signature on their input value eq_input to every other participant (via the untrusted coordinator), and expects to receive valid signatures on eq_input from the other participants. A participant terminates successfully as soon as the participant has collected what we call a success certificate, i.e., a full list of valid signatures from all n participants (including themselves).⁷

This termination rule immediately implies the integrity property: Unless a signature has been forged, if some honest participant with input eq_input terminates successfully, then by construction, all other honest participants have sent a signature on eq_input and thus received eq_input as input.

The key insight to ensuring conditional agreement is that any participant terminating successfully obtains a success certificate cert consisting of the collected list of all n signatures on eq_input. This certificate will, by the above termination rule, convince every other honest participant (who, by integrity, has received eq_input as input) to terminate successfully. Crucially, this other honest participant will be convinced even after having received invalid or no signatures during the actual run of CertEq, due to unreliable networks, a faulty coordinator, or faulty participants signing more than one value.

Thus, the certificate does not need to be sent during a normal run of CertEq, but can instead be presented to other participants later, e.g., during a request to participate in a FROST signing session.

Facilitating Backup and Recovery

ChillDKG constructs a transcript eq_input by appending to the transcript of EncPedPop the vector enc_secshare. This ensures that all participants agree on all encrypted shares, and as a consequence, the entire DKG output of a successful ChillDKG participant can be deterministically reproduced from a per-participant host secret key and the transcript.

This property is leveraged to offer a backup and recovery functionality: ChillDKG outputs a string called recovery data which is the concatenation of the transcript eq_input and the success certificate cert. The recovery data, which is the same for every participant, can be used by any participant together with the host secret key to recover the full output of the DKG session.

Crucially, the recovery data carries proof that the DKG session took place: any recovering participant can extract their own valid signature on the transcript from the success certificate. This valid signature proves that the participant, or more precisely, their former instance, had successfully reached the state at which this signature is sent to the coordinator. In particular, this implies that the proofs of possession from all participants, which are omitted in recovery data for succinctness, had been checked successfully.

In fact, the recovery procedure subsumes the handling of a valid success certificate which is presented to the participant only after the session (in case an invalid or no certificate was received during the session). As a result, ChillDKG does not provide a dedicated method for providing a success certificate after the session, and callers can simply use the recovery functionality instead.

Usage of ChillDKG

The purpose of this section is to provide a high-level overview of the interface and usage of ChillDKG, aimed at developers who would like to use a ChillDKG implementation in their applications and systems.

Detailed API documentation of the reference implementation is provided in Subsection "API Documentation". Developers who would like to implement ChillDKG or understand ChillDKG's internals and reference implementation should also read Section "Internals of ChillDKG".

Use ChillDKG only for FROST

ChillDKG is designed for usage with the FROST Schnorr signature scheme, and its security depends on the specifics of FROST. We stress that ChillDKG is not a general-purpose DKG protocol,⁸ and must not be combined with other threshold cryptographic schemes, e.g., threshold signature schemes other than FROST, or threshold decryption schemes, without careful further consideration, which is not in the scope of this document.

Protocol Parties and Network Setup

There are n >= 2 participants, t of which will be required to produce a signature. Each participant has a point-to-point communication link to the coordinator (but participants do not have direct communication links to each other).

If there is no dedicated coordinator, one of the participants can act as the coordinator.

Each participant and the coordinator, and the communication links may either be honest, i.e., reliable and adhering to the protocol, or faulty, i.e., controlled by an attacker or unreliable (e.g., due to software bugs).

Inputs and Output

The inputs of a session consist of a long-term host secret key (individual to each participant, not provided by the coordinator) and public session parameters (common to all participants and the coordinator).

If a session ChillDKG returns an output to a participant or the coordinator, then we say that this party deems the protocol session successful. In that case, the DKG output is a triple consisting of a secret share for participating in FROST signing sessions (individual to each participant, not returned to the coordinator), the threshold public key representing the t-of-n policy of the group (common to all participants and the coordinator), and a list of n public shares for verification of individual contributions to a FROST signing session (common to all participants and the coordinator). Moreover, all parties obtain recovery data (common to all participants and the coordinator), whose purpose is detailed in the next subsection.

To participate in the FROST signing protocol, signers need their DKG output and their index in the host public key list, although the full list of host public keys is not required for signing. Additionally, the set of indices of all participating signers within the host public key list is required to initiate a signing session.

Backup and Recovery

Losing the secret share or the threshold public key, e.g., after the loss of a participant device, will render the participant incapable of participating in signing sessions. As these values depend on the contributions of the other participants to the DKG session, they can, unlike deterministically derived secret keys [BIP 32] as typically used for single-signer Schnorr signatures [BIP 340] or MuSig [BIP 327], not be rederived solely from the participant's seed.

To facilitate backups of a DKG session, ChillDKG offers the possibility to recover a participant's DKG output from the participant's host secret key and the recovery data of the specific session, As a result, a full backup of a participant consists of the host secret key as well as the recovery data of all DKG sessions the participant has successfully participated in.

Since the recovery data is the same for all participants, if a participant loses the backup of the recovery data of the DKG session, they can request it from any other participants or the coordinator. Moreover, the recovery data contains secrets only in encrypted form and is self-authenticating so that it can, in principle, be stored with an untrusted third-party backup provider.

Users should be aware that the session parameters (the threshold and the host public keys) and public parts of the DKG output (the threshold public key and the public shares) can be inferred from the recovery data, which may constitute a privacy issue. To eliminate this issue, users can encrypt the recovery data using an encryption key derived from their host secret key before publishing the data. Recovery from encrypted data requires only the participant's host secret key, with no additional secrets needed. This BIP does not specify the encryption scheme.

Keeping backups of the secret key accessible and secure is hard (typically similarly hard as keeping the participant devices themselves). As a consequence, it may not be an unreasonable strategy in a threshold setup not to perform backups of host secret keys at all, and simply hope that t honest and working participants will remain available. As soon as one or more participants are lost or broken, a new DKG session can be performed with the lost participants replaced. The obvious drawback of this method is that it will result in a change of the threshold public key, and the application will, therefore, need to transition to the new threshold public key, e.g., funds stored under the current threshold public key need to be transferred to the new key.

Whether to perform backups of host secret keys and how to manage them ultimately depends on the requirements of the application, and we believe that a general recommendation is not useful.

Recovering Stuck Parties

The mere fact that a protocol party deems a ChillDKG session successful does not imply that other parties deem it successful yet. Indeed, due to failing communication links or invalid messages sent by faulty parties, it is possible that one party has deemed the DKG session successful, but others have not (yet) and thus are stuck in the DKG session. In that case, the successful parties can eventually convince the stuck parties to consider the DKG session successful by presenting the recovery data to them. The recovery data can, e.g., be attached to the first request to initiate a FROST signing session.

An important implication of the above is that anyone who uses the threshold public key, and thereby relies on the participants' ability to participate in signing sessions, must ensure that the participants have already deemed the DKG session successful, or at least, that the recovery data will be available to convince any stuck participants of the success of the DKG session.

For an example of what could go wrong, assume that some participant deems the DKG session successful and uses the threshold public key by sending funds to some Bitcoin address derived from it. Even though everything looks fine from the perspective of this participant, it is entirely possible that this participant is the only one who has deemed the DKG session successful, and thus (besides the untrusted coordinator) the only one who knows the recovery data. If the recovery data is lost now because this participant's permanent storage fails, the other participants cannot be convinced to deem the DKG session successful (without the help of the untrusted coordinator) and so the funds will be lost.

Thus, anyone who intends to use the threshold public key should first obtain explicit confirmations from all participants that they have deemed the DKG session successful, which will also imply that all participants have a redundant copy of the recovery data. One simple method of obtaining confirmation is to collect signed confirmation messages from all participants.

Depending on the application, other methods may be appropriate. For example, in a scenario where a single user employs multiple signing devices in the same room to set up a threshold wallet, the user could check that all n devices signal confirmation via its display. Alternatively, the user could check all n devices when generating a receiving address for the first time, which constitutes the first use of the threshold public key.

If a recovering party (see Backup and Recovery) cannot (re-)obtain confirmations, this simply means they should stop using the threshold public key going forward, e.g., stop sending additional funds to addresses derived from it. (But, in contrast to the bad example laid out above, it will still be possible to spend the funds, and even recovered participants can participate in signing sessions.)

Blaming Faulty Parties

Any faulty party can make a ChillDKG session abort by sending a message that deviates from the protocol specification. To help resolve the underlying problem, ChillDKG provides a blame functionality that enables honest protocol parties to identify and blame at least one participant suspected to be faulty:

• If an honest participant aborts the session, then this participant will blame at least one participant or the coordinator.
• If an honest coordinator aborts the session, then the coordinator then will blame at least one participant.

Moreover, a party which, instead of aborting after having received an invalid protocol message, aborts due to a timeout while waiting for a protocol message will trivially blame the party who is supposed to send the outstanding message.

The guarantees provided by the blame functionality are limited, and its primary purpose is to support manual investigation and debugging efforts. Different parties, even if honest, are not guaranteed to blame the same party, and there is, in general, no way to verify an accusation by some party that another party is to blame. Nevertheless, if all messages in the ChillDKG session have been transmitted correctly over the communication links, and, in case of a participant blaming another participant, if the coordinator is additionally honest, the aborting party will be guaranteed that the blamed party is indeed faulty.

It is important to understand that this guarantee is conditional. For example, assume that the condition of a honest coordinator is violated. In that case, even if all participants are honest, the malicious coordinator can deviate from the protocol in a way that makes one participant blame another participant, when, in fact, it is the coordinator who is faulty and not the blamed participant.

In some cases,⁹ an aborting participant needs to obtain an auxiliary investigation message from the coordinator in order to single out and blame another participant (see Overview of a ChillDKG session).

Threat Model and Security Goals

We expect ChillDKG to provide the following informal security goals when it is used to set up keys for the FROST threshold signature scheme. If a participant deems a protocol session successful (as defined in Inputs and Outputs), then this participant is assured that:

• A coalition of at most t - 1 faulty participants and a faulty coordinator cannot forge a signature under the returned threshold public key on any message m for which no signing session with at least one honest participant was initiated. (Unforgeability)¹⁰
• All honest participants who deem the protocol session successful will have correct and consistent protocol outputs. In particular, they agree on the threshold public key, the list of public shares, and the recovery data. Moreover, any t of them have secret shares consistent with the threshold public key.¹¹ This means that any t participants have all the necessary inputs to run FROST signing sessions which produce signatures valid under the threshold public key.
• The success certificate will, when presented to any other (honest) participant, convince that other participant to deem the protocol successful.

Overview of a ChillDKG Session

(See also python/example.py.)

The following figure shows an example ChillDKG involving the participants and the coordinator. For simplicity, only one participant is depicted. Arrows indicate network messages between the parties. Each message sent by the coordinator is a broadcast message, i.e., the coordinator sends the same message to each participant.¹² Unless participants abort due to errors, all participants run the same code and send messages in the same steps.

TODO Add on-wire messages sizes to the figure after defining message serialization format.

A participant can run multiple sessions with the same hostseckey, provided that the session state as output from any of the "step" functions is not reused. Multiple sessions may be run concurrently.

Whenever an invoked function fails and raises an error, the corresponding party will abort the session and, in most cases, blame a participant or the coordinator for the failure of the session. However, if a participant aborts during the participant_step2 function, there may be insufficient information determine another participant to blame. In this case, an optional investigation procedure is available: The aborting participant can ask the coordinator for an auxiliary investigation message (generated via the coordinator_investigate function), which will allow the participant to blame a specific other participant (via the participant_investigate function).

Applications may choose to let the coordinator always create and send investigation messages, (i.e., even if not asked for by an aborting participant). While different aborting participants will need different investigation messages, an investigation message intended for some participant does not to be kept confidential from other participants. Thus, applications may additionally choose to let the coordinator send all n investigation messages to all n participants.

API Documentation

This subsection is an export of the API documentation generated from the docstrings in the reference implementation (see python/chilldkg_ref/chilldkg.py.)

hostpubkey_gen

def hostpubkey_gen(hostseckey: bytes) -> bytes

Compute the participant's host public key from the host secret key.

The host public key is the long-term cryptographic identity of the participant.

This function interprets hostseckey as big-endian integer, and computes the corresponding "plain" public key in compressed serialization (33 bytes, starting with 0x02 or 0x03). This is the key generation procedure traditionally used in Bitcoin, e.g., for ECDSA. In other words, this function is equivalent to IndividualPubkey as defined in [BIP 327]. TODO Refer to the FROST signing BIP instead, once that one has a number.

Arguments:

• hostseckey - This participant's long-term secret key (32 bytes). The key must be 32 bytes of cryptographically secure randomness with sufficient entropy to be unpredictable. All outputs of a successful participant in a session can be recovered from (a backup of) the key and per-session recovery data.

  The same host secret key (and thus the same host public key) can be used in multiple DKG sessions. A host public key can be correlated to the threshold public key resulting from a DKG session only by parties who observed the session, namely the participants, the coordinator (and any eavesdropper).

Returns:

The host public key (33 bytes).

Raises:

• HostSeckeyError - If the length of hostseckey is not 32 bytes.

HostSeckeyError Exception

class HostSeckeyError(ValueError)

Raised if the length of a host secret key is not 32 bytes.

SessionParams Tuples

class SessionParams(NamedTuple):
    hostpubkeys: List[bytes]
    t: int

A SessionParams tuple holds the common parameters of a DKG session.

Attributes:

• hostpubkeys - Ordered list of the host public keys of all participants.

• t - The participation threshold t. This is the number of participants that will be required to sign. It must hold that 1 <= t <= len(hostpubkeys) <= 2**32 - 1.

  Participants must ensure that they have obtained authentic host public keys of all the other participants in the session to make sure that they run the DKG and generate a threshold public key with the intended set of participants. This is analogous to traditional threshold signatures (known as "multisig" in the Bitcoin community), [BIP 383], where the participants need to obtain authentic extended public keys ("xpubs") from the other participants to generate multisig addresses, or MuSig2 [BIP 327], where the participants need to obtain authentic individual public keys of the other participants to generate an aggregated public key.

  A DKG session will fail if the participants and the coordinator in a session don't have the hostpubkeys in the same order. This will make sure that honest participants agree on the order as part of the session, which is useful if the order carries an implicit meaning in the application (e.g., if the first t participants are the primary participants for signing and the others are fallback participants). If there is no canonical order of the participants in the application, the caller can sort the list of host public keys with the KeySort algorithm specified in BIP 327 to abstract away from the order.

params_id

def params_id(params: SessionParams) -> bytes

Return the parameters ID, a unique representation of the SessionParams.

In the common scenario that the participants obtain host public keys from the other participants over channels that do not provide end-to-end authentication of the sending participant (e.g., if the participants simply send their unauthenticated host public keys to the coordinator, who is supposed to relay them to all participants), the parameters ID serves as a convenient way to perform an out-of-band comparison of all host public keys. It is a collision-resistant cryptographic hash of the SessionParams tuple. As a result, if all participants have obtained an identical parameters ID (as can be verified out-of-band), then they all agree on all host public keys and the threshold t, and in particular, all participants have obtained authentic public host keys.

Returns:

• bytes - The parameters ID, a 32-byte string.

Raises:

• InvalidHostPubkeyError - If hostpubkeys contains an invalid public key.
• DuplicateHostPubkeyError - If hostpubkeys contains duplicates.
• ThresholdOrCountError - If 1 <= t <= len(hostpubkeys) <= 2**32 - 1 does not hold.

SessionParamsError Exception

class SessionParamsError(ValueError)

Base exception for invalid SessionParams tuples.

DuplicateHostPubkeyError Exception

class DuplicateHostPubkeyError(SessionParamsError)

Raised if two participants have identical host public keys.

This exception is raised when two participants have an identical host public key in the SessionParams tuple. Assuming the host public keys in question have been transmitted correctly, this exception implies that at least one of the two participants is faulty (because duplicates occur only with negligible probability if keys are generated honestly).

Attributes:

• participant1 int - Index of the first participant.
• participant2 int - Index of the second participant.

InvalidHostPubkeyError Exception

class InvalidHostPubkeyError(SessionParamsError)

Raised if a host public key is invalid.

This exception is raised when a host public key in the SessionParams tuple is not a valid public key in compressed serialization. Assuming the host public keys in question has been transmitted correctly, this exception implies that the corresponding participant is faulty.

Attributes:

• participant int - Index of the participant.

ThresholdOrCountError Exception

class ThresholdOrCountError(SessionParamsError)

Raised if 1 <= t <= len(hostpubkeys) <= 2**32 - 1 does not hold.

DKGOutput Tuples

class DKGOutput(NamedTuple):
    secshare: Optional[bytes]
    threshold_pubkey: bytes
    pubshares: List[bytes]

Holds the outputs of a DKG session.

Attributes:

• secshare - Secret share of the participant (or None for coordinator)
• threshold_pubkey - Generated threshold public key representing the group
• pubshares - Public shares of the participants

participant_step1

def participant_step1(hostseckey: bytes, params: SessionParams, random: bytes) -> Tuple[ParticipantState1, ParticipantMsg1]

Perform a participant's first step of a ChillDKG session.

Arguments:

• hostseckey - Participant's long-term host secret key (32 bytes).
• params - Common session parameters.
• random - FRESH random byte string (32 bytes).

Returns:

• ParticipantState1 - The participant's session state after this step, to be passed as an argument to participant_step2. The state must not be reused (i.e., it must be passed only to one participant_step2 call).
• ParticipantMsg1 - The first message to be sent to the coordinator.

Raises:

• HostSeckeyError - If the length of hostseckey is not 32 bytes or if hostseckey does not match any entry of hostpubkeys.
• InvalidHostPubkeyError - If hostpubkeys contains an invalid public key.
• DuplicateHostPubkeyError - If hostpubkeys contains duplicates.
• ThresholdOrCountError - If 1 <= t <= len(hostpubkeys) <= 2**32 - 1 does not hold.

participant_step2

def participant_step2(hostseckey: bytes, state1: ParticipantState1, cmsg1: CoordinatorMsg1) -> Tuple[ParticipantState2, ParticipantMsg2]

Perform a participant's second step of a ChillDKG session.

Warning: After sending the returned message to the coordinator, this participant must not erase the hostseckey, even if this participant does not receive the coordinator reply needed for the participant_finalize call. The underlying reason is that some other participant may receive the coordinator reply, deem the DKG session successful and use the resulting threshold public key (e.g., by sending funds to it). If the coordinator reply remains missing, that other participant can, at any point in the future, convince this participant of the success of the DKG session by presenting recovery data, from which this participant can recover the DKG output using the recover function.

Arguments:

• hostseckey - Participant's long-term host secret key (32 bytes).
• state1 - The participant's session state as output by participant_step1.
• cmsg1 - The first message received from the coordinator.

Returns:

• ParticipantState2 - The participant's session state after this step, to be passed as an argument to participant_finalize. The state must not be reused (i.e., it must be passed only to one participant_finalize call).
• ParticipantMsg2 - The second message to be sent to the coordinator.

Raises:

• HostSeckeyError - If the length of hostseckey is not 32 bytes.
• FaultyParticipantOrCoordinatorError - If another known participant or the coordinator is faulty. See the documentation of the exception for further details.
• UnknownFaultyParticipantOrCoordinatorError - If another unknown participant or the coordinator is faulty, but running the optional investigation procedure of the protocol is necessary to determine a suspected participant. See the documentation of the exception for further details.

participant_finalize

def participant_finalize(state2: ParticipantState2, cmsg2: CoordinatorMsg2) -> Tuple[DKGOutput, RecoveryData]

Perform a participant's final step of a ChillDKG session.

If this function returns properly (without an exception), then this participant deems the DKG session successful. It is, however, possible that other participants have received a cmsg2 from the coordinator that made them raise an exception instead, or that they have not received a cmsg2 from the coordinator at all. These participants can, at any point in time in the future (e.g., when initiating a signing session), be convinced to deem the session successful by presenting the recovery data to them, from which they can recover the DKG outputs using the recover function.

Warning: Changing perspectives, this implies that, even when obtaining an exception, this participant must not conclude that the DKG session has failed, and as a consequence, this particiant must not erase the hostseckey. The underlying reason is that some other participant may deem the DKG session successful and use the resulting threshold public key (e.g., by sending funds to it). That other participant can, at any point in the future, convince this participant of the success of the DKG session by presenting recovery data to this participant.

Arguments:

• state2 - The participant's state as output by participant_step2.

Returns:

• DKGOutput - The DKG output.
• bytes - The serialized recovery data.

Raises:

• FaultyParticipantOrCoordinatorError - If another known participant or the coordinator is faulty. Make sure to read the above warning, and see the documentation of the exception for further details.
• FaultyCoordinatorError - If the coordinator is faulty. Make sure to read the above warning, and see the documentation of the exception for further details.

participant_investigate

def participant_investigate(error: UnknownFaultyParticipantOrCoordinatorError, cinv: CoordinatorInvestigationMsg) -> NoReturn

Investigate who is to blame for a failed ChillDKG session.

This function can optionally be called when participant_step2 raises UnknownFaultyParticipantOrCoordinatorError. It narrows down the suspected faulty parties by analyzing the investigation message provided by the coordinator.

This function does not return normally. Instead, it raises one of two exceptions.

Arguments:

• error - UnknownFaultyParticipantOrCoordinatorError raised by participant_step2.
• cinv - Coordinator investigation message for this participant as output by coordinator_investigate.

Raises:

• FaultyParticipantOrCoordinatorError - If another known participant or the coordinator is faulty. See the documentation of the exception for further details.
• FaultyCoordinatorError - If the coordinator is faulty. See the documentation of the exception for further details.

coordinator_step1

def coordinator_step1(pmsgs1: List[ParticipantMsg1], params: SessionParams) -> Tuple[CoordinatorState, CoordinatorMsg1]

Perform the coordinator's first step of a ChillDKG session.

Arguments:

• pmsgs1 - List of first messages received from the participants.
• params - Common session parameters.

Returns:

• CoordinatorState - The coordinator's session state after this step, to be passed as an argument to coordinator_finalize. The state is not supposed to be reused (i.e., it should be passed only to one coordinator_finalize call).
• CoordinatorMsg1 - The first message to be sent to all participants.

Raises:

• InvalidHostPubkeyError - If hostpubkeys contains an invalid public key.
• DuplicateHostPubkeyError - If hostpubkeys contains duplicates.
• ThresholdOrCountError - If 1 <= t <= len(hostpubkeys) <= 2**32 - 1 does not hold.

coordinator_finalize

def coordinator_finalize(state: CoordinatorState, pmsgs2: List[ParticipantMsg2]) -> Tuple[CoordinatorMsg2, DKGOutput, RecoveryData]

Perform the coordinator's final step of a ChillDKG session.

If this function returns properly (without an exception), then the coordinator deems the DKG session successful. The returned CoordinatorMsg2 is supposed to be sent to all participants, who are supposed to pass it as input to the participant_finalize function. It is, however, possible that some participants pass a wrong and invalid message to participant_finalize (e.g., because the message is transmitted incorrectly). These participants can, at any point in time in the future (e.g., when initiating a signing session), be convinced to deem the session successful by presenting the recovery data to them, from which they can recover the DKG outputs using the recover function.

If this function raises an exception, then the DKG session was not successful from the perspective of the coordinator. In this case, it is, in principle, possible to recover the DKG outputs of the coordinator using the recovery data from a successful participant, should one exist. Any such successful participant is either faulty, or has received messages from other participants via a communication channel beside the coordinator.

Arguments:

• state - The coordinator's session state as output by coordinator_step1.
• pmsgs2 - List of second messages received from the participants.

Returns:

• CoordinatorMsg2 - The second message to be sent to all participants.
• DKGOutput - The DKG output. Since the coordinator does not have a secret share, the DKG output will have the secshare field set to None.
• bytes - The serialized recovery data.

Raises:

• FaultyParticipantError - If another known participant or the coordinator is faulty. See the documentation of the exception for further details.

coordinator_investigate

def coordinator_investigate(pmsgs: List[ParticipantMsg1]) -> List[CoordinatorInvestigationMsg]

Generate investigation messages for a ChillDKG session.

The investigation messages will allow the participants to investigate who is to blame for a failed ChillDKG session (see participant_investigate).

Each message is intended for a single participant but can be safely broadcast to all participants because the messages contain no confidential information.

Arguments:

• pmsgs - List of first messages received from the participants.

Returns:

• List[CoordinatorInvestigationMsg] - A list of investigation messages, each intended for a single participant.

recover

def recover(hostseckey: Optional[bytes], recovery_data: RecoveryData) -> Tuple[DKGOutput, SessionParams]

Recover the DKG output of a ChillDKG session.

This function serves two different purposes:

1. To recover from an exception in participant_finalize or coordinator_finalize, after obtaining the recovery data from another participant or the coordinator. See participant_finalize and coordinator_finalize for background.
2. To reproduce the DKG outputs on a new device, e.g., to recover from a backup after data loss.

Arguments:

• hostseckey - This participant's long-term host secret key (32 bytes) or None if recovering the coordinator.
• recovery_data - Recovery data from a successful session.

Returns:

• DKGOutput - The recovered DKG output.
• SessionParams - The common parameters of the recovered session.

Raises:

• HostSeckeyError - If the length of hostseckey is not 32 bytes or if hostseckey does not match the recovery data. (This can also occur if the recovery data is invalid.)
• RecoveryDataError - If recovery failed due to invalid recovery data.

RecoveryDataError Exception

class RecoveryDataError(ValueError)

Raised if the recovery data is invalid.

ProtocolError Exception

class ProtocolError(Exception)

Base exception for errors caused by received protocol messages.

FaultyParticipantError Exception

class FaultyParticipantError(ProtocolError)

Raised if a participant is faulty.

This exception is raised by the coordinator code when it detects faulty behavior by a participant, i.e., a participant has deviated from the protocol. The index of the participant is provided as part of the exception. Assuming protocol messages have been transmitted correctly and the coordinator itself is not faulty, this exception implies that the participant is indeed faulty.

This exception is raised only by the coordinator code. Some faulty behavior by participants will be detected by the other participants instead. See FaultyParticipantOrCoordinatorError for details.

Attributes:

• participant int - Index of the faulty participant.

FaultyParticipantOrCoordinatorError Exception

class FaultyParticipantOrCoordinatorError(ProtocolError)

Raised if another known participant or the coordinator is faulty.

This exception is raised by the participant code when it detects what looks like faulty behavior by a suspected participant. The index of the suspected participant is provided as part of the exception.

Importantly, this exception is not proof that the suspected participant is indeed faulty. It is instead possible that the coordinator has deviated from the protocol in a way that makes it look as if the suspected participant has deviated from the protocol. In other words, assuming messages have been transmitted correctly and the raising participant is not faulty, this exception implies that

• the suspected participant is faulty,
• or the coordinator is faulty (and has framed the suspected participant).

This exception is raised only by the participant code. Some faulty behavior by participants will be detected by the coordinator instead. See FaultyParticipantError for details.

Attributes:

• participant int - Index of the suspected participant.

FaultyCoordinatorError Exception

class FaultyCoordinatorError(ProtocolError)

Raised if the coordinator is faulty.

This exception is raised by the participant code when it detects faulty behavior by the coordinator, i.e., the coordinator has deviated from the protocol. Assuming protocol messages have been transmitted correctly and the raising participant is not faulty, this exception implies that the coordinator is indeed faulty.

UnknownFaultyParticipantOrCoordinatorError Exception

class UnknownFaultyParticipantOrCoordinatorError(ProtocolError)

Raised if another unknown participant or the coordinator is faulty.

This exception is raised by the participant code when it detects what looks like faulty behavior by some other participant, but there is insufficient information to determine which participant should be suspected.

To determine a suspected participant, the raising participant may choose to run the optional investigation procedure of the protocol, which requires obtaining an investigation message from the coordinator. See the participant_investigate function for details.

This is only raised for specific faulty behavior by another participant which cannot be attributed to another participant without further help of the coordinator (namely, sending invalid encrypted secret shares).

Attributes:

• inv_data - Information required to perform the investigation.

Changelog

To help the reader understand updates to this document, we attach a version number that resembles "semantic versioning" (MAJOR.MINOR.PATCH). The MAJOR version is incremented if changes to the BIP are introduced that are incompatible with prior versions. An exception to this rule is MAJOR version zero (0.y.z) which is for development and does not need to be incremented if backwards-incompatible changes are introduced. The MINOR version is incremented whenever the inputs or the output of an algorithm changes in a backward-compatible way or new backward-compatible functionality is added. The PATCH version is incremented for other noteworthy changes (bug fixes, test vectors, important clarifications, etc.).

• 0.2.0 (2024-12-19): In addition to various readability improvements to specification and reference implementation, the following major changes were implemented:
  • Fix security vulnerability where the CertEq signature did not cover the entire message.
  • Add blame functionality to identify faulty parties, including an investigation phase.
  • Make threshold public key Taproot-safe by default.
  • Let each participant encrypt the secret share intended for themselves so that it can be decrypted instead of re-derived during recovery. The encryption is symmetric to avoid the overhead of an ECDH computation.
• 0.1.0 (2024-07-08): Publication of draft BIP on the bitcoin-dev mailing list

Acknowledgments

We thank Lloyd Fournier (LLFourn) and Sivaram (siv2r) for their comments and contributions to this document.

Footnotes

1. While t = n and t = 1 are in principle supported, simpler alternatives are available in these cases. In the case of t = n, using a dedicated n-of-n multi-signature scheme such as MuSig2 [BIP 327] instead of FROST avoids the need for an interactive DKG. The case t = 1 can be realized by letting one participant generate an ordinary BIP 340 key pair and transmitting the key pair to every other participant, who can check its consistency and then simply use the ordinary BIP 340 signing algorithm. Participants still need to ensure that they agree on a key pair. A detailed specification is not in the scope of this document. ↩

2. A very similar attack has been observed in the implementation of a resharing scheme [AS20, Section 3]. ↩

3. This implements a multi-recipient multi-key key encapsulation mechanism (MR-MK-KEM) secure under the static Diffie-Hellman assumption [Theorem 2, PPS14]. ↩

4. Schnorr signatures and ECDH-based KEMs are known to be jointly secure [Theorem 2, DLPSS11] under the combination of the gap-DH and gap-DL assumptions, and this result can be adapted to the MR-KEM used in EncPedPop. ↩

5. No protocol can prevent man-in-the-middle attacks without this or a comparable assumption. Note that this requirement is implicit in other schemes as well. For example, setting up a multi-signature wallet via non-interactive key aggregation in MuSig2 [BIP 327] also requires the assumption that all participants have authentic copies of each other's individual public keys. ↩

6. CertEq can be viewed as a signed variant of the Goldwasser-Lindell echo broadcast protocol [GL05, Protocol 1], or alternatively, as a unanimous variant of Signed Echo Broadcast [Rei94, Section 4], [CGR11, Algorithm 3.17].) ↩

7. Abstractly, the required primitive is a multi-signature scheme, i.e., n participants signing the same message eq_input. We have chosen the naive scheme of collecting a list of n individual signatures for simplicity. Other multi-signatures schemes, e.g., MuSig2 [BIP 327] or a scheme based on Schnorr signature half aggregation [Halfagg-BIP-Draft, CGKN21, CZ22], could be used instead to reduce the size of the success certificate. These methods are out of scope of this document. ↩

8. As a variant of Pedersen DKG, ChillDKG does not provide simulation-based security GJKR07. Roughly speaking, if ChillDKG is combined with some threshold cryptographic scheme, the security of the combination is not automatically implied by the security of the two components. Instead, the security of every combination must be analyzed separately. The security of the specific combination of SimplPedPop (as the core building block of ChillDKG) and FROST has been analyzed CGRS23. ↩

9. Namely, when having received incorrect secret shares. ↩

10. See Chu, Gerhart, Ruffing, and Schröder [Definition 3, CGRS23] for a formal definition. ↩

11. See Ruffing, Ronge, Jin, Schneider-Bensch, and Schröder [Definition 2.5, RRJSS22] for a formal definition. ↩

12. Recall that we do not assume a reliable broadcast channel but instead that the coordinator has separate a point-to-point communication links to each participant. In other words, the protocol prescribes that an honest coordinator sends the same message to every participant, but the security of the protocol does not depend on the coordinator adhering to that prescribe. ↩