ESP32-C3 Development Board. Made with KiCAD 8.0
You can get ESP32-C3-WROOM-02 from here.
Orders can be placed by uploading data(Gerber, BOM, and CPL) to the JLCPCB.
This project uses Espressif Library for KiCAD. (It is available on Plugin & Contents manager.)
Gerber, bom and cpl is placed on production folder directory and Release.
- Upload method: USB (Do not use GPIO 18 and 19 when downloading)
- USB: Type-C (USB 2.0)
- Regulator: RT9080-33GJ5.
- External input voltage range: 4.3-6.5V (4.5V-5.5V is recommended)
- Power consumption (in deep sleep): 11.5µA (ESP32-C3: 5µA, RT9080-33GJ5: 6.5µA)
- JP1 ... VBUS = 5V jumper (Default: not connected): Connecting this disables the protective SBD between USB and external power supply. To eliminate the voltage drop due to SBD and output the voltage input from USB as it is to 5V, connect this jumper. Note that shorting this pin will increase current consumption by about 0.1mA due to the pull-down resistor on the CC pin.
- JP2 ... 5V -> 3.3V jumper (Default: connected): Connection of the external power supply terminal (5V pin) to the power input terminal to the ESP32-C3. Disconnect when suppressing regulator quiescent current.
