Skip to content

Latest commit

 

History

History
267 lines (220 loc) · 7.72 KB

README.md

File metadata and controls

267 lines (220 loc) · 7.72 KB
Raw

Run Status

Networking Tools

The comments and instructions below are for the new IP stack in Zephyr.

In a Zephyr default setup, the network tools are pre-installed under the tools directory.

Here are instructions how to communicate between Zephyr that is running inside QEMU, and host device that is running Linux.

For setting up routing and NAT rules to allow access to external networks, please see the README NAT.md

You need to run socat and tunslip to create a minimally working network setup.

There are convenience scripts (loop-socat.sh and loop-slip-tap.sh) for running socat and tunslip6 processes. For running these, you need two terminals.

Terminal 1:

$ ./loop-socat.sh

Terminal 2:

$ sudo ./loop-slip-tap.sh

After running these scripts you do not need to manually restart them when qemu process stops.

In the Qemu side, you need to compile the kernel with proper config. Minimally you need these settings active in your project config file.

CONFIG_NETWORKING=y
CONFIG_NET_IPV6=y
CONFIG_NET_IPV4=y
CONFIG_NET_YAIP=y
CONFIG_NET_UDP=y
CONFIG_NET_LOG=y
CONFIG_NET_SLIP=y
CONFIG_SLIP_TAP=y
CONFIG_SYS_LOG=y
CONFIG_SYS_LOG_SHOW_COLOR=y
CONFIG_NANO_TIMEOUTS=y
CONFIG_TEST_RANDOM_GENERATOR=y

After you have the loop scripts and Qemu running running you can communicate with the Zephyr.

If your have echo-server running in the Qemu, then you can use the echo-client tool in net-tools directory to communicate with it.

# ./echo-client -i tap0 2001:db8::1

The IP stack responds to ping requests if properly configured.

$ ping6 -I tap0 -c 1 2001:db8::1

You can attach wireshark to tap0 interface to see what data is being transferred.

If building with CONFIG_NET_TCP=y in your project config file, it's possible to run the echo-server sample in Zephyr, and then test the TCP stack using the supplied tcptest.py script:

$ ./tcptest.py tap0 2001:db8::1

This script will send numbers to the echo-server program, read them back, and compare if it got the exact bytes back. Transmission errors, timeouts, and time to get the response are all recorded and printed to the standard output.

Be sure to use Python 3, as it requires a function from the socket module that's only available in this version (wrapper around if_nametoindex(3)).

Using net-setup.sh script to setup host side ethernet interface

The net-setup.sh script can setup an ethernet interface to the host. User is able to setup a configuration file that will contain commands to setup IP addresses and routes to the host interface. This net-setup.sh script will need to be run as a root user.

If no parameters are given, then "zeth" network interface and "zeth.conf" configuration file are used. The script waits until user presses CTRL-c and then removes the network interface.

$ net-setup.sh

$ net-setup.sh --config zeth-vlan.conf

$ net-setup.sh --config my-own-config.conf --iface foobar

It is also possible to let the script return and then stop the network interface later. Is can be done by first creating the interface with "start" or "up" command, and then later remove the interface with "stop" or "down" command.

$ net-setup.sh start
do your things here
$ net-setup.sh stop

$ net-setup.sh --config my-own-config.conf up
do your things here
$ net-setup.sh --config my-own-config.conf down

Any extra parameters that the script does not know, are passed directly to "ip" command.

$ net-setup.sh --config my-own-config.conf --iface foo user bar

Using encrypted SSL link with echo-* programs

Install stunnel

Fedora:

$ dnf install stunnel

Ubuntu:

$ apt-get install stunnel4 -y

Finally run the stunnel script in Linux

$ ./stunnel.sh

And connect echo-client to this SSL tunnel (note that the IP address is the address of Linux host where the tunnel end point is located).

$ ./echo-client -p 4243 2001:db8::2 -t

If you are running echo-client in Zephyr QEMU, then run echo-server like this:

$ ./echo-server -p 4244 -i tap0

If you want to re-create the certificates in echo-server and echo-client in Zephyr net samples, then they can be created like this (note that you do not need to do this as the certs have been prepared already in echo-server and echo-client sample sources):

$ openssl genrsa -out echo-apps-key.pem 2048
$ openssl req -new -x509 -key echo-apps-key.pem -out echo-apps-cert.pem \
    -days 10000 -subj '/CN=localhost'

The cert that is to be embedded into test_certs.h in echo-server and echo-client, can be generated like this:

$ openssl x509 -in echo-apps-cert.pem -outform DER | \
    hexdump -e '8/1 "0x%02x, " "\n"' | sed 's/0x  ,//g'

The private key to be embedded into test_certs.h in echo-server can be generated like this:

$ openssl pkcs8 -topk8 -inform PEM -outform DER -nocrypt \
    -in echo-apps-key.pem | hexdump -e '8/1 "0x%02x, " "\n"' | \
    sed 's/0x  ,//g'

If you want to re-create the signed certificates in echo-server in Zephyr net samples and echo-client in net-tools, then they can be created like this (note that you do not need to do this as the certs have been prepared already in echo-server and echo-client sources):

CA
--
$ openssl genrsa -out ca_privkey.pem 2048
$ openssl req -new -x509 -days 36500 -key ca_privkey.pem -out ca.crt -subj "/CN=exampleCA"

Convert to DER format
$ openssl x509 -in ca.crt -outform DER -out ca.der

Client
------
$ openssl genrsa -out client_privkey.pem 2048
$ openssl req -new -key client_privkey.pem -out client.csr -subj "/CN=exampleClient"
$ openssl x509 -req -CA ca.crt -CAkey ca_privkey.pem -days 36500 -in client.csr -CAcreateserial -out client.crt

Server
------
$ openssl genrsa -out server_privkey.pem 2048
$ openssl req -new -key server_privkey.pem -out server.csr -subj "/CN=localhost"
$ openssl x509 -req -CA ca.crt -CAkey ca_privkey.pem -days 36500 -in server.csr -CAcreateserial -out server.crt

Convert to DER format
$ openssl x509 -in server.crt -outform DER -out server.der
$ openssl pkcs8 -topk8 -inform PEM -outform DER -nocrypt -in server_privkey.pem -out server_privkey.der

Copy ca.crt, client.crt and client_privkey.pem to net-tools. Copy ca.der, server.der and server_privkey.der to samples/net/sockets/echo-server/src/.

Enable NET_SAMPLE_CERTS_WITH_SC in samples/net/sockets/echo-server and build the sample. Use stunnel_sc.conf in stunnel.sh to run echo-client with signed certificates.

Using DTLS link with echo-* programs

For DTLS client functionality, you can do this

$ ./dtls-client -c echo-apps-cert.pem 2001:db8::1

or

$ ./dtls-client -c echo-apps-cert.pem 192.0.2.1

For DTLS server functionality, you can do this

$ ./dtls-server

TLS connecitivity errors

If you see this error print in zephyr console

[net/app] [ERR] _net_app_ssl_mainloop: Closing connection -0x7180 (SSL - Verification of the message MAC failed)

Then increasing the mbedtls heap size might help. So you can set the option CONFIG_MBEDTLS_HEAP_SIZE to some higher value.

Example:

CONFIG_MBEDTLS_HEAP_SIZE=30000

PPP Connectivity

You can test the PPP connectivity running in Qemu in Zephyr using pppd that is running in Linux host. You need to run socat and pppd to create a minimally working network setup.

There are convenience scripts (loop-ppp-dev.sh and loop-pppd.sh) for running socat and pppd processes. For running these, you need two terminals.

Terminal 1:

$ ./loop-ppp-dev.sh

Terminal 2:

$ sudo ./loop-pppd.sh

After this, start PPP enabled Zephyr application. For example Zephyr echo-server sample in samples/net/sockets/echo_server has overlay-ppp.conf file that enables PPP support.