Using V pot setting for send only

[larsvanderloo]

Hello everyone,

I’m attempting to configure my controller to integrate with UAD LUNA (DAW) to create dedicated send effects encoders. Currently, when I press the ASSIGN_SEND button, it switches the V pot to control sends in LUNA. However, my goal is to have dedicated send encoders in Channel Strip Mode instead of the V pots changing functions. Is that possible with MCU?

from the manual (Thomann):
Channel Strip View
Send Channel Strip view allows you to edit all Send parameters for the selected track.

#include <Control_Surface.h> // Include the Control Surface library

// Instantiate a MIDI over USB interface.
USBMIDI_Interface midi;

// Initialize the array of CCRotaryEncoder objects
CCRotaryEncoder enc[] = {
  {{9, 10}, {MCU::V_POT_2 , Channel_1}, 5,},
};

// Instantiate a multiplexer
CD74HC4067 mux1(A0, {3, 4, 5, 6}); // Define the multiplexer with the analog input pin and address pins

NoteButtonLatching switches[] = {
  {mux1.pin(3), {MCU::ASSIGN_SEND, Channel_1}} // Define a latching button on pin 4 of the multiplexer
};



void setup() {
  // Select the correct relative MIDI CC mode:
  Control_Surface.begin(); // Initialize Control Surface
}

void loop() {
  Control_Surface.loop(); // Update the Control Surface
}

Thanks in advance!!