diff --git a/README.md b/README.md
index c5986c8..4551e4d 100644
--- a/README.md
+++ b/README.md
@@ -9,12 +9,11 @@ Simple [RTSP](https://en.wikipedia.org/wiki/Real_Time_Streaming_Protocol), [HTTP
> This branch supports all the current devices and the Seeed Studio Xiao esp32s3!
> Please use this and let me know if this works for you!
-
Flashing this software on a ESP32CAM module will make it a **RTSP streaming camera** server, a **HTTP Motion JPEG streamer** and a **HTTP image server**.
Supported protocols
-- RTSP
+- RTSP
The RTSP protocol is an industry standard and allows many CCTV systems and applications (like for example [VLC](https://www.videolan.org/vlc/)) to connect directly to the ESP32CAM camera stream.
It is also possible to stream directly to a server using [ffmpeg](https://ffmpeg.org).
This makes the module a camera server allowing recording and the stream can be stored on a disk and replayed later.
@@ -51,7 +50,7 @@ The software provides a **configuration web server**, that can be used to:
- Brightness
- Contrast
- Saturation
- - Special effect (Normal, Negative, Grayscale, Red/Green/Blue tint, Sepia)
+ - Special effect (Normal, Negative, Gray-scale, Red/Green/Blue tint, Sepia)
- White balance
- Automatic White Balance gain
- Wite Balance mode
@@ -86,17 +85,17 @@ There are a lot of boards available that are all called ESP32-CAM.
However, there are differences in CPU (type/speed/cores), how the camera is connected, presence of PSRAM or not...
To select the right board use the table below and use the configuration that is listed below for your board:
-| Board | Configuration | Image | CPU | RAM | Camera | Site |
-|--- |--- |--- |--- |--- |--- |--- |
-| Espressif ESP32-Wropver CAM | | 
| ESP32 | 520KB SRAM 4MB PSRAM | OV2640 | |
-| AI-Thinker ESP32-CAM | ai_thinker_esp32cam | 
| ESP32-S / 160Mhz | 520KB SRAM 4MB PSRAM | OV2640 | https://docs.ai-thinker.com/en/esp32-cam |
-| Espressif ESP-EYE | | 
| ESP32 | 520KB SRAM 4MB PSRAM | OV2640 | |
-| Espressif ESP-S3-EYE| | 
| ESP32-S3 | 520KB SRAM 4MB PSRAM | OV2640 | https://www.espressif.com/en/products/devkits/esp-eye/overview |
-| LilyGo camera module| | 
| ESP32 Wrover | 520KB SRAM 4MB PSRAM | OV2640 / OV5640
-| LilyGo Simcam| | 
| | | OV2640 | |
-| LilyGo TTGO-T Camera| | 
|| | OV2640 | |
-| M5 Stack Camera| | 
||| OV2640 | |
-| Seeed studio Xiao ESPS3 Sense| seeed_xiao_esp32s3_sense | 
| ESP32-S3 | 520KB SRAM 4MB PSRAM | OV2640 | |
+| Board | Configuration | Image | CPU | RAM | Camera | Site |
+|--- |--- |--- |--- |--- |--- |--- |
+| Espressif ESP32-Wropver CAM | | | ESP32 | 520KB SRAM 4MB PSRAM | OV2640 | |
+| AI-Thinker ESP32-CAM | ai_thinker_esp32cam | | ESP32-S / 160Mhz | 520KB SRAM 4MB PSRAM | OV2640 | https://docs.ai-thinker.com/en/esp32-cam |
+| Espressif ESP-EYE | | | ESP32 | 520KB SRAM 4MB PSRAM | OV2640 | |
+| Espressif ESP-S3-EYE | | | ESP32-S3 | 520KB SRAM 4MB PSRAM | OV2640 | https://www.espressif.com/en/products/devkits/esp-eye/overview |
+| LilyGo camera module | | | ESP32 Wrover | 520KB SRAM 4MB PSRAM | OV2640 / OV5640
+| LilyGo Simcam | | | | | OV2640 | |
+| LilyGo TTGO-T Camera | | || | OV2640 | |
+| M5 Stack Camera | | ||| OV2640 | |
+| Seeed studio Xiao ESPS3 Sense | seeed_xiao_esp32s3_sense | | ESP32-S3 | 520KB SRAM 4MB PSRAM | OV2640 | |
## Installing and running PlatformIO
@@ -137,7 +136,6 @@ cd esp32cam-rtsp
Next, the firmware has to be build and deployed to the ESP32.
There are to flavours to do this; using the command line or the graphical interface of Visual Studio Code.
-I recommend to use VIsual Studio Code as it is free to use and offers more insight.
### Using the command line
@@ -242,16 +240,8 @@ Calling this URL will start the form for configuring the device in the browser.
### GET: /snapshot
Calling this URL will return a JPEG snapshot of the camera in the browser.
-
This request can also be used (for example using cURL) to save the snapshot to a file.
-### GET: /flash?v={intensity}
-
-Calling this URL will set the intensity of the flash LED. Authentication is required.
-
-The parameter v for the intensity must be between 0 (off) and 255 (max).
-If no v parameter is present, it will be set to the value of the flash LED intensity from configuration.
-
## Issues / Nice to know
- The red LED on the back of the device indicates the device is not connected.