ergoCub 1.1 S/N:001 – Connector of ethernet cable robot side broken

[isorrentino]

Robot Name 🤖

ergoCub 1.1 S/N:001

Request/Failure description

As per the title

cc @Gandoo @Fabrizio69

Detailed context

As per the title

Additional context

No response

How does it affect you?

No response

[github-actions]

⚠️ Detected missing mandatory information

Hi @isorrentino 👋🏻

Some of the following points need your attention.

You are required to:

• enter the Robot Name.
• give the issue a meaningful Title.
• provide a Detailed Context (at least 100 characters).

_{Please, mark the points above as solved once done.}

[AntonioConsilvio]

maybe related with:

• ergoCub 1.1 S/N:001 – Ethernet connector does not clip and does not seem to always work #1921

[Gandoo]

ciao @isorrentino and @AntonioConsilvio I replaced the RJ45 connector, but the problem is on the FED board which has a broken network connector.
You have to remove the back to replace the board

cc @S-Dafarra @Fabrizio69

[Gandoo]

ciao @isorrentino and @AntonioConsilvio I managed to replace the FED board now the ETH cable remains inserted

cc @Fabrizio69

[AntonioConsilvio]

Good job @Gandoo, closing! 🚀