ergoCub 1.0 S/N:000 – LCD of the face is broken

[steb6]

Robot Name 🤖

ergoCub 1.0 S/N:000

Request/Failure description

the lcd (face) of the robot is completely black

Detailed context

while using the robot, the screen started jiggling for a while and now it is completely black.

Additional context

No response

How does it affect you?

No response

[github-actions]

⚠️ Detected missing mandatory information

Hi @steb6 👋🏻

Some of the following points need your attention.

You are required to:

• enter the Robot Name.
• give the issue a meaningful Title.
• provide a Detailed Context (at least 100 characters).

_{Please, mark the points above as solved once done.}

[steb6]

@AntonioConsilvio do you have time to fix before the end of the week? at the "festival della scienza" demo, the face emotions will be quite important

[SimoneMic]

The LCD is still broken, and we need it at the Festival della Scienza.
Sorry for bothering you so much, thank you!

cc @lornat75 @maggia80

[filippoborgogni]

Hi, @SimoneMic, we replaced the flat cable that connects the display to the MIP-1000 board because it was damaged.
For the moment the robot works!

cc @AntonioAzocar @AntonioConsilvio

[SimoneMic]

During the demos the LCD behaved properly and everything went fine!

We can close this issue
Thank you!