ergoCub 1.1 S/N:001 – Robot does not start

[isorrentino]

Robot Name 🤖

ergoCub 1.1 S/N:001

Request/Failure description

The board 10.0.1.2 is not communicating. With FirwareUpdater I'm not able to see any board attached.

Detailed context

log_ergocub-torso_yarprobotinterface_24682.txt

Additional context

No response

How does it affect you?

No response

[S-Dafarra]

The issue seems on the left arm FT whose cable got damaged. The issue of no CAN boards visible from FirmwareUpdater seems due to the usual issue thaat it is not possible to detect CAN boards using FirmwareUpdater from the torso

[S-Dafarra]

With icub-tech-iit/robots-configuration@a182c73 I have removed both arm FTs and the robot starts

[S-Dafarra]

Cc @Gandoo

[Gandoo]

ciao @AntonioConsilvio I disconnected the left ft sensor at Can-FT and the right one from EB1. Need to consider replacing both FTSensors because the cable has come out of the housing and they might be stripped or torn, consequently the 5Vdc might give problems.

cc @isorrentino @DanielePucci

[AntonioConsilvio]

Hi, there are already two issues (one in each arm) regarding the malfunctioning of FTs. I therefore proceed to close this issue in favour of:

• ergoCub 1.1 S/N:001 – Right arm FT broken #1909
• ergoCub 1.1 S/N:001 – [Left arm FT broken] #1923