iCubGenova09 (iRonCub3) S/N:000 – Chest IMU cable pulled out from sleeve and probably disconnected

[gabrielenava]

Robot Name 🤖

iCubGenova09 (iRonCub3) S/N:000

Request/Failure description

The cable of the chest IMU pulled out of the sleeve during experiments with iRonCub, close to the connection with the chest IMU. The cables inside do not look disconnected or broken, nevertheless the IMU does not start anymore. We created a workaround with another (external) cable and the IMU is working fine, so we suspect that the cable not only exited the sleeve but also got damaged somehow.

Detailed context

Additional context

No response

How does it affect you?

No response

[github-actions]

⚠️ Detected missing mandatory information

Hi @gabrielenava 👋🏻

Some of the following points need your attention.

You are required to:

• enter the Robot Name.
• give the issue a meaningful Title.
• provide a Detailed Context (at least 100 characters).

_{Please, mark the points above as solved once done.}

[Fabrizio69]

Hi @gabrielenava , is the connector (cod.17372) damaged?

[gabrielenava]

the connector seems ok I think it is just the cable

[Gandoo]

fili strappati

[Gandoo]

ciao @gabrielenava ho ripristinato il filo nero strappato e la schermatura del cavo che era saldata sul manicotto del connettore. Vi chiedo solamente di fare attenzione nello sconnettere il connettore dalla IMU facendo forza dove indicato dalla freccia e NON sul cavo per evitare di danneggiare il cavo.
Grazie, Buona giornata!!

cc @Fabrizio69 @DanielePucci @AntonioConsilvio @sgiraz

[gabrielenava]

grazie mille! lo testiamo appena possibile poi possiamo chiudere il ticket

[sgiraz]

Ciao @gabrielenava,

Have you tested the IMU? I guess that is working now, isn't it? :)

cc @Gandoo @AntonioConsilvio @Fabrizio69

[gabrielenava]

Have you tested the IMU? I guess that is working now, isn't it? :)

ciao @sgiraz not yet, but there are some tests scheduled for tomorrow and I can verify the IMU

[gabrielenava]

I have tested the robot in these days and the IMU is working fine! thanks again! we can close the issue