diff --git a/README.md b/README.md
index a2dcc3381..23f5101e7 100644
--- a/README.md
+++ b/README.md
@@ -355,6 +355,7 @@ See [CONTRIBUTING.md](./docs/CONTRIBUTING.md).
     [267]  ThermoPro Meat Thermometers, TP828B 2 probes with Temp, BBQ Target LO and HI
     [268]  Bresser Thermo-/Hygro-Sensor Explore Scientific ST1005H
     [269]  DeltaDore X3D devices
+    [270]* Quinetic
 
 * Disabled by default, use -R n or a conf file to enable
 
diff --git a/conf/quinetic_switch.conf b/conf/quinetic_switch.conf
new file mode 100644
index 000000000..6788e13be
--- /dev/null
+++ b/conf/quinetic_switch.conf
@@ -0,0 +1,29 @@
+#
+# Quinetic Switches and Sensors
+#
+# Basic Usage:
+# rtl_433 /etc/rtl_433/quinetic_switch.conf
+#
+# Recommended approach:
+# Copy this file to a new location then customise it (e.g. custom output like MQTT).
+# See 'rtl_433.example.conf' for configuration options.
+#
+# Quinetic Tuning:
+# For accurate capture of Quinetic RF packets, use sample_rate of 1024k or higher.
+# Device center frequency: 433.3Mhz +/-50Khz
+#
+
+# FREQ TUNING
+frequency 433.4M
+sample_rate 1024k
+pulse_detect minmax
+
+# ADAPTER TUNING (RTL Chip)
+gain 37
+
+# SELECTION OF PROTOCOL(S) (268=QUINETIC)
+protocol 268
+
+# DEBUG
+#report_meta level
+#report_meta noise
diff --git a/conf/rtl_433.example.conf b/conf/rtl_433.example.conf
index b05de6389..4579e174f 100644
--- a/conf/rtl_433.example.conf
+++ b/conf/rtl_433.example.conf
@@ -496,6 +496,7 @@ convert si
   protocol 267 # ThermoPro Meat Thermometers, TP828B 2 probes with Temp, BBQ Target LO and HI
   protocol 268 # Bresser Thermo-/Hygro-Sensor Explore Scientific ST1005H
   protocol 269 # DeltaDore X3D devices
+# protocol 268 # Quinetic
 
 ## Flex devices (command line option "-X")
 
diff --git a/include/rtl_433_devices.h b/include/rtl_433_devices.h
index 689bdf6de..f872c2521 100644
--- a/include/rtl_433_devices.h
+++ b/include/rtl_433_devices.h
@@ -277,6 +277,7 @@
     DECL(thermopro_tp828b) \
     DECL(bresser_st1005h) \
     DECL(deltadore_x3d) \
+    DECL(quinetic) \
 
     /* Add new decoders here. */
 
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index b567d351e..ae152f343 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -200,6 +200,7 @@ add_library(r_433 STATIC
     devices/prologue.c
     devices/proove.c
     devices/quhwa.c
+    devices/quinetic.c
     devices/radiohead_ask.c
     devices/rainpoint.c
     devices/regency_fan.c
diff --git a/src/devices/quinetic.c b/src/devices/quinetic.c
new file mode 100644
index 000000000..e8b705882
--- /dev/null
+++ b/src/devices/quinetic.c
@@ -0,0 +1,122 @@
+/** @file
+    Quinetic Switches and Sensors.
+
+    Copyright (C) 2024 Nick Parrott
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+*/
+
+/**
+Quinetic Switches and Sensors.
+
+## Frame Layout
+
+    ...PPPP SS IISCC
+
+- P: 48-bits+ of Preamble
+- S: 16-bits of Sync-Word (0xA4, 0x23)
+- I: 16-bits of Device ID
+- S: 8-bits of Device Action
+- C: 16-bits of In-Packet Checksum (CRC-16 AUG-CCITT)
+
+## CRC Checksum Method
+
+- In-Packet Checksum: CC
+- 24-bits of data to CRC-check: IIS
+
+## Signal Summary
+
+- Frequency: 433.3 Mhz, +/- 50Khz
+- Nominal pulse width: 10us
+- Modulation: FSK_PCM
+- Checksum: CRC-16/AUG-CCITT
+
+## Device Characteristics
+
+- A switch emits 3-4 pulses when button is pressed.
+- A switch emits 3-4 pulses when button is released.
+- This duplication of packets is expected.
+- Device ID is preserved as 16-bit Hex.
+- It is printed on device rear-label (some models).
+*/
+
+#include "decoder.h"
+
+static int quinetic_switch_decode(r_device *decoder, bitbuffer_t *bitbuffer)
+{
+
+    if (bitbuffer->bits_per_row[0] < 110 || bitbuffer->bits_per_row[0] > 140) {
+        return DECODE_ABORT_LENGTH;
+    }
+
+    const uint8_t packet_syncword[] = {0xA4, 0x23};
+    unsigned syncword_bitindex;
+
+    syncword_bitindex = bitbuffer_search(bitbuffer, 0, 0, packet_syncword, 16);
+    if (syncword_bitindex >= bitbuffer->bits_per_row[0]) {
+        decoder_logf(decoder, 1, __func__, "Sync-Word not found");
+        return DECODE_ABORT_EARLY;
+    }
+
+    uint8_t b[5];
+    bitbuffer_extract_bytes(bitbuffer, 0, syncword_bitindex + 16, b, sizeof(b) * 8);
+
+    int crc = crc16(b, 5, 0x1021, 0x1D0F);
+    if (crc != 0) {
+        decoder_logf(decoder, 1, __func__, "CRC failure");
+        return DECODE_FAIL_MIC;
+    }
+
+    // Process Switch-Channel (Button) nibble: b[2]
+    //
+    // Determine button number in switch (B1/B2/B3) when pressed.
+    // Typical Int Values:
+    //
+    // 192 = generic release
+    // 01 = press ( B1 )
+    // 02 = press ( B2 )
+    // 03 = press ( B3 )
+    int switch_channel = b[2];
+    if (switch_channel == 192) {
+        // Ignore "button release": button number unknown.
+        return DECODE_ABORT_EARLY;
+    }
+
+    // Process Switch-ID nibbles: b[0] and b[1]
+    int id = (b[0] << 8) | (b[1]);
+
+    /* clang-format off */
+    data_t *data = data_make(
+        "model",         "Model",           DATA_STRING, "Quinetic",
+        "id",            "ID",              DATA_FORMAT, "%04x", DATA_INT, id,
+        "channel",       "Channel",         DATA_INT,    switch_channel,
+        "mic",           "Integrity",       DATA_STRING, "CRC",
+        NULL);
+    /* clang-format on */
+
+    decoder_output_data(decoder, data);
+    return 1;
+}
+
+static char const *const output_fields[] = {
+        "model",
+        "id",
+        "channnel",
+        "mic",
+        NULL,
+};
+
+r_device const quinetic = {
+        .name        = "Quinetic",
+        .modulation  = FSK_PULSE_PCM,
+        .short_width = 10,
+        .long_width  = 10,
+        .reset_limit = 120,
+        .tolerance   = 1,
+        .decode_fn   = &quinetic_switch_decode,
+        .fields      = output_fields,
+        .disabled    = 1, // disabled by default, due to required settings: frequency 433.4, sample_rate 1024k
+};