SimpleGet.ino

/****************************************************************************************************************************
  SimpleGet.ino - Simple Arduino web server sample for Ethernet shield

  For STM32F/L/H/G/WB/MP1 with built-in Ethernet LAN8742A (Nucleo-144, DISCOVERY, etc) or W5x00/ENC28J60 shield/module

  EthernetWebServer_SSL_STM32 is a library for STM32 using the Ethernet shields to run WebServer and Client with/without SSL

  Use SSLClient Library code from https://github.com/OPEnSLab-OSU/SSLClient

  Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer_SSL_STM32

  Simple GET client for HttpClient
  Connects to server once every five seconds, sends a GET request

  created 14 Feb 2016
  modified 22 Jan 2019
  by Tom Igoe
 *****************************************************************************************************************************/

#include "defines.h"

char serverAddress[] = "192.168.2.112";  // server address
int port = 8080;

EthernetClient      client;
EthernetHttpClient  httpClient(client, serverAddress, port);

void setup()
{
  Serial.begin(115200);

  while (!Serial && millis() < 5000);

  Serial.print("\nStarting SimpleGet on " + String(BOARD_NAME));
  Serial.println(" with " + String(SHIELD_TYPE));

#if USE_ETHERNET_GENERIC
  Serial.println(ETHERNET_GENERIC_VERSION);
#endif

  Serial.println(ETHERNET_WEBSERVER_SSL_STM32_VERSION);

#if !(USE_BUILTIN_ETHERNET)
#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
  ET_LOGWARN(F("========================="));
#endif
#else
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
  ET_LOGWARN(F("========================="));
#endif
#endif

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET
  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  //Ethernet.init(USE_THIS_SS_PIN);

#endif  //( ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
#endif

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  uint16_t index = millis() % NUMBER_OF_MAC;
  // Use Static IP
  //Ethernet.begin(mac[index], ip);
  Ethernet.begin(mac[index]);

  Serial.print(F("Connected! IP address: "));
  Serial.println(Ethernet.localIP());
}

void loop()
{
  Serial.println("making GET request");
  httpClient.get("/");

  // read the status code and body of the response
  int statusCode = httpClient.responseStatusCode();
  String response = httpClient.responseBody();

  Serial.print("Status code: ");
  Serial.println(statusCode);
  Serial.print("Response: ");
  Serial.println(response);
  Serial.println("Wait five seconds");
  delay(5000);
}