var semver = require('semver');

var i;
var keys;
var len;

var MESSAGE = exports.MESSAGE = {
  // Transport layer protocol -- generic (1-19)
  DISCONNECT: 1,
  IGNORE: 2,
  UNIMPLEMENTED: 3,
  DEBUG: 4,
  SERVICE_REQUEST: 5,
  SERVICE_ACCEPT: 6,

  // Transport layer protocol -- algorithm negotiation (20-29)
  KEXINIT: 20,
  NEWKEYS: 21,

  // Transport layer protocol -- key exchange method-specific (30-49)

  // User auth protocol -- generic (50-59)
  USERAUTH_REQUEST: 50,
  USERAUTH_FAILURE: 51,
  USERAUTH_SUCCESS: 52,
  USERAUTH_BANNER: 53,

  // User auth protocol -- user auth method-specific (60-79)

  // Connection protocol -- generic (80-89)
  GLOBAL_REQUEST: 80,
  REQUEST_SUCCESS: 81,
  REQUEST_FAILURE: 82,

  // Connection protocol -- channel-related (90-127)
  CHANNEL_OPEN: 90,
  CHANNEL_OPEN_CONFIRMATION: 91,
  CHANNEL_OPEN_FAILURE: 92,
  CHANNEL_WINDOW_ADJUST: 93,
  CHANNEL_DATA: 94,
  CHANNEL_EXTENDED_DATA: 95,
  CHANNEL_EOF: 96,
  CHANNEL_CLOSE: 97,
  CHANNEL_REQUEST: 98,
  CHANNEL_SUCCESS: 99,
  CHANNEL_FAILURE: 100

  // Reserved for client protocols (128-191)

  // Local extensions (192-155)
};
for (i = 0, keys = Object.keys(MESSAGE), len = keys.length; i < len; ++i)
  MESSAGE[MESSAGE[keys[i]]] = keys[i];
// context-specific message codes:
MESSAGE.KEXDH_INIT = 30;
MESSAGE.KEXDH_REPLY = 31;
MESSAGE.KEXDH_GEX_REQUEST = 34;
MESSAGE.KEXDH_GEX_GROUP = 31;
MESSAGE.KEXDH_GEX_INIT = 32;
MESSAGE.KEXDH_GEX_REPLY = 33;
MESSAGE.KEXECDH_INIT = 30; // included here for completeness
MESSAGE.KEXECDH_REPLY = 31; // included here for completeness
MESSAGE.USERAUTH_PASSWD_CHANGEREQ = 60;
MESSAGE.USERAUTH_PK_OK = 60;
MESSAGE.USERAUTH_INFO_REQUEST = 60;
MESSAGE.USERAUTH_INFO_RESPONSE = 61;

var DYNAMIC_KEXDH_MESSAGE = exports.DYNAMIC_KEXDH_MESSAGE = {};
DYNAMIC_KEXDH_MESSAGE[MESSAGE.KEXDH_GEX_GROUP] = 'KEXDH_GEX_GROUP';
DYNAMIC_KEXDH_MESSAGE[MESSAGE.KEXDH_GEX_REPLY] = 'KEXDH_GEX_REPLY';

var KEXDH_MESSAGE = exports.KEXDH_MESSAGE = {};
KEXDH_MESSAGE[MESSAGE.KEXDH_INIT] = 'KEXDH_INIT';
KEXDH_MESSAGE[MESSAGE.KEXDH_REPLY] = 'KEXDH_REPLY';

var DISCONNECT_REASON = exports.DISCONNECT_REASON = {
  HOST_NOT_ALLOWED_TO_CONNECT: 1,
  PROTOCOL_ERROR: 2,
  KEY_EXCHANGE_FAILED: 3,
  RESERVED: 4,
  MAC_ERROR: 5,
  COMPRESSION_ERROR: 6,
  SERVICE_NOT_AVAILABLE: 7,
  PROTOCOL_VERSION_NOT_SUPPORTED: 8,
  HOST_KEY_NOT_VERIFIABLE: 9,
  CONNECTION_LOST: 10,
  BY_APPLICATION: 11,
  TOO_MANY_CONNECTIONS: 12,
  AUTH_CANCELED_BY_USER: 13,
  NO_MORE_AUTH_METHODS_AVAILABLE: 14,
  ILLEGAL_USER_NAME: 15
};
for (i = 0, keys = Object.keys(DISCONNECT_REASON), len = keys.length;
     i < len;
     ++i) {
  DISCONNECT_REASON[DISCONNECT_REASON[keys[i]]] = keys[i];
}

var CHANNEL_OPEN_FAILURE = exports.CHANNEL_OPEN_FAILURE = {
  ADMINISTRATIVELY_PROHIBITED: 1,
  CONNECT_FAILED: 2,
  UNKNOWN_CHANNEL_TYPE: 3,
  RESOURCE_SHORTAGE: 4
};
for (i = 0, keys = Object.keys(CHANNEL_OPEN_FAILURE), len = keys.length;
     i < len;
     ++i) {
  CHANNEL_OPEN_FAILURE[CHANNEL_OPEN_FAILURE[keys[i]]] = keys[i];
}

var TERMINAL_MODE = exports.TERMINAL_MODE = {
  TTY_OP_END: 0,        // Indicates end of options.
  VINTR: 1,             // Interrupt character; 255 if none. Similarly for the
                        //  other characters.  Not all of these characters are
                        //  supported on all systems.
  VQUIT: 2,             // The quit character (sends SIGQUIT signal on POSIX
                        //  systems).
  VERASE: 3,            // Erase the character to left of the cursor.
  VKILL: 4,             // Kill the current input line.
  VEOF: 5,              // End-of-file character (sends EOF from the terminal).
  VEOL: 6,              // End-of-line character in addition to carriage return
                        //  and/or linefeed.
  VEOL2: 7,             // Additional end-of-line character.
  VSTART: 8,            // Continues paused output (normally control-Q).
  VSTOP: 9,             // Pauses output (normally control-S).
  VSUSP: 10,            // Suspends the current program.
  VDSUSP: 11,           // Another suspend character.
  VREPRINT: 12,         // Reprints the current input line.
  VWERASE: 13,          // Erases a word left of cursor.
  VLNEXT: 14,           // Enter the next character typed literally, even if it
                        //  is a special character
  VFLUSH: 15,           // Character to flush output.
  VSWTCH: 16,           // Switch to a different shell layer.
  VSTATUS: 17,          // Prints system status line (load, command, pid, etc).
  VDISCARD: 18,         // Toggles the flushing of terminal output.
  IGNPAR: 30,           // The ignore parity flag.  The parameter SHOULD be 0
                        //  if this flag is FALSE, and 1 if it is TRUE.
  PARMRK: 31,           // Mark parity and framing errors.
  INPCK: 32,            // Enable checking of parity errors.
  ISTRIP: 33,           // Strip 8th bit off characters.
  INLCR: 34,            // Map NL into CR on input.
  IGNCR: 35,            // Ignore CR on input.
  ICRNL: 36,            // Map CR to NL on input.
  IUCLC: 37,            // Translate uppercase characters to lowercase.
  IXON: 38,             // Enable output flow control.
  IXANY: 39,            // Any char will restart after stop.
  IXOFF: 40,            // Enable input flow control.
  IMAXBEL: 41,          // Ring bell on input queue full.
  ISIG: 50,             // Enable signals INTR, QUIT, [D]SUSP.
  ICANON: 51,           // Canonicalize input lines.
  XCASE: 52,            // Enable input and output of uppercase characters by
                        //  preceding their lowercase equivalents with "\".
  ECHO: 53,             // Enable echoing.
  ECHOE: 54,            // Visually erase chars.
  ECHOK: 55,            // Kill character discards current line.
  ECHONL: 56,           // Echo NL even if ECHO is off.
  NOFLSH: 57,           // Don't flush after interrupt.
  TOSTOP: 58,           // Stop background jobs from output.
  IEXTEN: 59,           // Enable extensions.
  ECHOCTL: 60,          // Echo control characters as ^(Char).
  ECHOKE: 61,           // Visual erase for line kill.
  PENDIN: 62,           // Retype pending input.
  OPOST: 70,            // Enable output processing.
  OLCUC: 71,            // Convert lowercase to uppercase.
  ONLCR: 72,            // Map NL to CR-NL.
  OCRNL: 73,            // Translate carriage return to newline (output).
  ONOCR: 74,            // Translate newline to carriage return-newline
                        // (output).
  ONLRET: 75,           // Newline performs a carriage return (output).
  CS7: 90,              // 7 bit mode.
  CS8: 91,              // 8 bit mode.
  PARENB: 92,           // Parity enable.
  PARODD: 93,           // Odd parity, else even.
  TTY_OP_ISPEED: 128,   // Specifies the input baud rate in bits per second.
  TTY_OP_OSPEED: 129    // Specifies the output baud rate in bits per second.
};
for (i = 0, keys = Object.keys(TERMINAL_MODE), len = keys.length; i < len; ++i)
  TERMINAL_MODE[TERMINAL_MODE[keys[i]]] = keys[i];

var CHANNEL_EXTENDED_DATATYPE = exports.CHANNEL_EXTENDED_DATATYPE = {
  STDERR: 1
};
for (i = 0, keys = Object.keys(CHANNEL_EXTENDED_DATATYPE), len = keys.length;
     i < len;
     ++i) {
  CHANNEL_EXTENDED_DATATYPE[CHANNEL_EXTENDED_DATATYPE[keys[i]]] = keys[i];
}

exports.SIGNALS = ['ABRT', 'ALRM', 'FPE', 'HUP', 'ILL', 'INT',
                   'QUIT', 'SEGV', 'TERM', 'USR1', 'USR2', 'KILL',
                   'PIPE'];

var DEFAULT_KEX = [
  'diffie-hellman-group14-sha1' // REQUIRED
];
var SUPPORTED_KEX = [
  'diffie-hellman-group1-sha1'  // REQUIRED
];
if (semver.gte(process.version, '0.11.12')) {
  // https://tools.ietf.org/html/rfc4419#section-4
  DEFAULT_KEX = [
    'diffie-hellman-group-exchange-sha256'
  ].concat(DEFAULT_KEX);
  SUPPORTED_KEX = [
    'diffie-hellman-group-exchange-sha1'
  ].concat(SUPPORTED_KEX);
}
if (semver.gte(process.version, '0.11.14')) {
  // https://tools.ietf.org/html/rfc5656#section-10.1
  DEFAULT_KEX = [
    'ecdh-sha2-nistp256',
    'ecdh-sha2-nistp384',
    'ecdh-sha2-nistp521'
  ].concat(DEFAULT_KEX);
}
var KEX_BUF = new Buffer(DEFAULT_KEX.join(','), 'ascii');
SUPPORTED_KEX = DEFAULT_KEX.concat(SUPPORTED_KEX);

var DEFAULT_SERVER_HOST_KEY = [
  'ssh-rsa'
];
var SUPPORTED_SERVER_HOST_KEY = [
  'ssh-dss'
];
if (semver.gte(process.version, '5.2.0')) {
  // ECDSA keys are only supported in v5.2.0+ because of a crypto change that
  // made it possible to (efficiently) generate an ECDSA public key from a
  // private key (commit nodejs/node#da5ac55c83eb2c09cfb3baf7875529e8f1113529)
  DEFAULT_SERVER_HOST_KEY.push(
    'ecdsa-sha2-nistp256',
    'ecdsa-sha2-nistp384',
    'ecdsa-sha2-nistp521'
  );
}
var SERVER_HOST_KEY_BUF = new Buffer(DEFAULT_SERVER_HOST_KEY.join(','),
                                     'ascii');
SUPPORTED_SERVER_HOST_KEY = DEFAULT_SERVER_HOST_KEY.concat(
  SUPPORTED_SERVER_HOST_KEY
);

var DEFAULT_CIPHER = [];
var SUPPORTED_CIPHER = [
  'aes256-cbc',
  'aes192-cbc',
  'aes128-cbc',
  'blowfish-cbc',
  '3des-cbc',

  // http://tools.ietf.org/html/rfc4345#section-4:
  'arcfour256',
  'arcfour128',

  'cast128-cbc',
  'arcfour'
];
if (semver.gte(process.version, '0.11.12')) {
  // node v0.11.12 introduced support for setting AAD, which is needed for
  // AES-GCM in SSH2
  DEFAULT_CIPHER = [
    // http://tools.ietf.org/html/rfc5647
    'aes128-gcm',
    'aes128-gcm@openssh.com',
    'aes256-gcm',
    'aes256-gcm@openssh.com'
  ].concat(DEFAULT_CIPHER);
}
DEFAULT_CIPHER = [
  // http://tools.ietf.org/html/rfc4344#section-4
  'aes128-ctr',
  'aes192-ctr',
  'aes256-ctr'
].concat(DEFAULT_CIPHER);
var CIPHER_BUF = new Buffer(DEFAULT_CIPHER.join(','), 'ascii');
SUPPORTED_CIPHER = DEFAULT_CIPHER.concat(SUPPORTED_CIPHER);

var DEFAULT_HMAC = [
  'hmac-sha2-256',
  'hmac-sha2-512',
  'hmac-sha1',
];
var SUPPORTED_HMAC = [
  'hmac-md5',
  'hmac-sha2-256-96', // first 96 bits of HMAC-SHA256
  'hmac-sha2-512-96', // first 96 bits of HMAC-SHA512
  'hmac-ripemd160',
  'hmac-sha1-96',     // first 96 bits of HMAC-SHA1
  'hmac-md5-96'       // first 96 bits of HMAC-MD5
];
var HMAC_BUF = new Buffer(DEFAULT_HMAC.join(','), 'ascii');
SUPPORTED_HMAC = DEFAULT_HMAC.concat(SUPPORTED_HMAC);

var DEFAULT_COMPRESS = [
  'none',
  'zlib@openssh.com', // ZLIB (LZ77) compression, except
                      // compression/decompression does not start until after
                      // successful user authentication
  'zlib'              // ZLIB (LZ77) compression
];
var SUPPORTED_COMPRESS = [];
var COMPRESS_BUF = new Buffer(DEFAULT_COMPRESS.join(','), 'ascii');
SUPPORTED_COMPRESS = DEFAULT_COMPRESS.concat(SUPPORTED_COMPRESS);

exports.ALGORITHMS = {
  KEX: DEFAULT_KEX,
  KEX_BUF: KEX_BUF,
  SUPPORTED_KEX: SUPPORTED_KEX,

  SERVER_HOST_KEY: DEFAULT_SERVER_HOST_KEY,
  SERVER_HOST_KEY_BUF: SERVER_HOST_KEY_BUF,
  SUPPORTED_SERVER_HOST_KEY: SUPPORTED_SERVER_HOST_KEY,

  CIPHER: DEFAULT_CIPHER,
  CIPHER_BUF: CIPHER_BUF,
  SUPPORTED_CIPHER: SUPPORTED_CIPHER,

  HMAC: DEFAULT_HMAC,
  HMAC_BUF: HMAC_BUF,
  SUPPORTED_HMAC: SUPPORTED_HMAC,

  COMPRESS: DEFAULT_COMPRESS,
  COMPRESS_BUF: COMPRESS_BUF,
  SUPPORTED_COMPRESS: SUPPORTED_COMPRESS
};
exports.SSH_TO_OPENSSL = {
  // ECDH key exchange
  'ecdh-sha2-nistp256': 'prime256v1', // OpenSSL's name for 'secp256r1'
  'ecdh-sha2-nistp384': 'secp384r1',
  'ecdh-sha2-nistp521': 'secp521r1',
  // Ciphers
  'aes128-gcm': 'aes-128-gcm',
  'aes256-gcm': 'aes-256-gcm',
  'aes128-gcm@openssh.com': 'aes-128-gcm',
  'aes256-gcm@openssh.com': 'aes-256-gcm',
  '3des-cbc': 'des-ede3-cbc',
  'blowfish-cbc': 'bf-cbc',
  'aes256-cbc': 'aes-256-cbc',
  'aes192-cbc': 'aes-192-cbc',
  'aes128-cbc': 'aes-128-cbc',
  'idea-cbc': 'idea-cbc',
  'cast128-cbc': 'cast-cbc',
  'rijndael-cbc@lysator.liu.se': 'aes-256-cbc',
  'arcfour128': 'rc4',
  'arcfour256': 'rc4',
  'arcfour512': 'rc4',
  'arcfour': 'rc4',
  'camellia128-cbc': 'camellia-128-cbc',
  'camellia192-cbc': 'camellia-192-cbc',
  'camellia256-cbc': 'camellia-256-cbc',
  'camellia128-cbc@openssh.com': 'camellia-128-cbc',
  'camellia192-cbc@openssh.com': 'camellia-192-cbc',
  'camellia256-cbc@openssh.com': 'camellia-256-cbc',
  '3des-ctr': 'des-ede3',
  'blowfish-ctr': 'bf-ecb',
  'aes256-ctr': 'aes-256-ctr',
  'aes192-ctr': 'aes-192-ctr',
  'aes128-ctr': 'aes-128-ctr',
  'cast128-ctr': 'cast5-ecb',
  'camellia128-ctr': 'camellia-128-ecb',
  'camellia192-ctr': 'camellia-192-ecb',
  'camellia256-ctr': 'camellia-256-ecb',
  'camellia128-ctr@openssh.com': 'camellia-128-ecb',
  'camellia192-ctr@openssh.com': 'camellia-192-ecb',
  'camellia256-ctr@openssh.com': 'camellia-256-ecb',
  // HMAC
  'hmac-sha1-96': 'sha1',
  'hmac-sha1': 'sha1',
  'hmac-sha2-256': 'sha256',
  'hmac-sha2-256-96': 'sha256',
  'hmac-sha2-512': 'sha512',
  'hmac-sha2-512-96': 'sha512',
  'hmac-md5-96': 'md5',
  'hmac-md5': 'md5',
  'hmac-ripemd160': 'ripemd160'
};

var BUGS = exports.BUGS = {
  BAD_DHGEX: 1,
  OLD_EXIT: 2,
  DYN_RPORT_BUG: 4
};

exports.BUGGY_IMPLS = [
  [ 'Cisco-1.25', BUGS.BAD_DHGEX ],
  [ /^[0-9.]+$/, BUGS.OLD_EXIT ], // old SSH.com implementations
  [ /^OpenSSH_5\.\d+/, BUGS.DYN_RPORT_BUG ]
];