send me a camera screenshot at different intervals

[starschild86]

hi,
i would like to be able to have HA send me telegram notifications at different intervals including a photo from the camera.
i already have setup telegram notifications in general and would like to send one to my account with the following:

• printing is at x%
• camera snapshot attached
  this could be done at various intervals, e.g. at 15%, 50%, 99% (to have a photo of print almost complete before the bed gets lower)
  do you have an idea on how to do this?
  best,
  Nicola

[jjvelar]

I have created this automation in Home Assistant. I hope it helps:

`alias: Notificación - Bambu Lab A1 Print Progress
description: ""
trigger:

• platform: state
  entity_id:
  • sensor.a1_xxxxxxxxxxxxxxx_print_status
    to: prepare
    id: Preparing
• platform: state
  entity_id:
  • sensor.a1_xxxxxxxxxxxxxxx_print_status
    to: running
    id: Start
• platform: state
  entity_id:
  • sensor.a1_xxxxxxxxxxxxxxx_print_status
    to: finish
    id: Finished
• platform: state
  entity_id:
  • sensor.a1_xxxxxxxxxxxxxxx_print_status
    to: Failed
    id: Failed
    from: Running
• platform: state
  entity_id:
  • sensor.a1_xxxxxxxxxxxxxxx_print_status
    to: Pause
    id: Pause
    from: Running
• platform: template
  value_template: >-
  {{ states('sensor.a1_xxxxxxxxxxxxxxx_print_progress') | int % 25 == 0 and
  states('sensor.a1_xxxxxxxxxxxxxxx_print_progress') | int > 0 and
  states('sensor.a1_xxxxxxxxxxxxxxx_print_progress') | int < 100 }}
  condition: []
  action:
• service: button.press
  metadata: {}
  data: {}
  target:
  entity_id: button.a1_xxxxxxxxxxxxxxx_force_refresh_data
• delay:
  hours: 0
  minutes: 0
  seconds: 5
  milliseconds: 0
• if:

  • condition: trigger
    id:

    • Finished
    • Preparing
    • Failed
    • Start
      then:

  • service: notify.telegram_jv
    data:
    title: ""
    message: ""
    data:
    photo:
    - url: >-
    http://HOME_ASSISTANT_LOCAL_IP:PORT{{state_attr('image.a1_xxxxxxxxxxxxxxx_camera',
    'entity_picture') }}
    caption: |-
    Bambu Lab A1 Print Job
    - Status: {{ trigger.id }}
    else:

  • service: notify.telegram_jv
    data:
    title: ""
    message: ""
    data:
    photo:
    - url: >-
    http://HOME_ASSISTANT_LOCAL_IP:PORT{{state_attr('image.a1_xxxxxxxxxxxxxxx_camera',
    'entity_picture') }}
    caption: >-
    Bambu Lab A1 Print Job

          - File: {{states('sensor.a1_xxxxxxxxxxxxxxx_gcode_filename')|
          replace('_', '\\_')}}
    
          - Progress:
          {{states('sensor.a1_xxxxxxxxxxxxxxx_print_progress')}}%
    
          - Remaining time: {% set minutes =
          states('sensor.a1_xxxxxxxxxxxxxxx_remaining_time') | int %}{%
          set days = (minutes // (24 * 60)) %}{% set hours = (minutes %
          (24 * 60)) // 60 %}{% set remaining_minutes = minutes % 60
          %}{% if days > 0 %}{{days}}d {% endif %}{% if hours > 0
          %}{{hours}}h {% endif %}{{remaining_minutes}}m
    

mode: single`