How to log in? #2
Comments
|
You could setup autologin on the rootfs and then use the bashrc to execute your stuff. |
|
That works, thanks @fionera for the advice. Here is how I accomplished it for anyone else who wants to make use out of Switch Linux at the moment:
Step 1 Find the following values and replace them (you could comment the old values out using # so you can always revert): Step 2 Now you can wave your fists victoriously and meme your friends. |
|
Thanks for this workaround. |
|
@oxynux As far as I know nothing is supported through the USB-C port except power. There is a kernel floating around that has working bluetooth and WiFi along with a rootfs image with the LXDE desktop installed, if you search around for it you should find it. Edit: I was able to get a bluetooth keyboard working, however Chromium causes a kernel panic when bluetooth is enabled so use Firefox or some alternative web browser instead. |
tardyp
pushed a commit
to tardyp/switch-linux
that referenced
this issue
May 1, 2018
When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the source address of the outer IPv6 header, in case none was specified. Using skb->dev can lead to BUG() when it is in an inconsistent state. This patch uses the net_device attached to the skb's dst instead. [940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c [940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0 [940807.815725] PGD 0 P4D 0 [940807.847173] Oops: 0000 [fail0verflow#1] SMP PTI [940807.890073] Modules linked in: [940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W 4.16.0-rc1-seg6bpf+ fail0verflow#2 [940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26 09/06/2010 [940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0 [940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206 [940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe [940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500 [940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff [940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850 [940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002 [940808.684675] FS: 0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [940808.783036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0 [940808.939634] Call Trace: [940808.970041] <IRQ> [940808.995250] ? ip6t_do_table+0x265/0x640 [940809.043341] seg6_do_srh_encap+0x28f/0x300 [940809.093516] ? seg6_do_srh+0x1a0/0x210 [940809.139528] seg6_do_srh+0x1a0/0x210 [940809.183462] seg6_output+0x28/0x1e0 [940809.226358] lwtunnel_output+0x3f/0x70 [940809.272370] ip6_xmit+0x2b8/0x530 [940809.313185] ? ac6_proc_exit+0x20/0x20 [940809.359197] inet6_csk_xmit+0x7d/0xc0 [940809.404173] tcp_transmit_skb+0x548/0x9a0 [940809.453304] __tcp_retransmit_skb+0x1a8/0x7a0 [940809.506603] ? ip6_default_advmss+0x40/0x40 [940809.557824] ? tcp_current_mss+0x24/0x90 [940809.605925] tcp_retransmit_skb+0xd/0x80 [940809.654016] tcp_xmit_retransmit_queue.part.17+0xf9/0x210 [940809.719797] tcp_ack+0xa47/0x1110 [940809.760612] tcp_rcv_established+0x13c/0x570 [940809.812865] tcp_v6_do_rcv+0x151/0x3d0 [940809.858879] tcp_v6_rcv+0xa5c/0xb10 [940809.901770] ? seg6_output+0xdd/0x1e0 [940809.946745] ip6_input_finish+0xbb/0x460 [940809.994837] ip6_input+0x74/0x80 [940810.034612] ? ip6_rcv_finish+0xb0/0xb0 [940810.081663] ipv6_rcv+0x31c/0x4c0 ... Fixes: 6c8702c ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Tom Herbert <[email protected]> Signed-off-by: David Lebrun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
tardyp
pushed a commit
to tardyp/switch-linux
that referenced
this issue
May 1, 2018
syzbot reported a LOCKDEP splat [1] in rt6_age_examine_exception()
rt6_age_examine_exception() is called while rt6_exception_lock is held.
This lock is the lower one in the lock hierarchy, thus we can not
call dst_neigh_lookup() function, as it can fallback to neigh_create()
We should instead do a pure RCU lookup. As a bonus we avoid
a pair of atomic operations on neigh refcount.
[1]
WARNING: possible circular locking dependency detected
4.16.0-rc4+ #277 Not tainted
syz-executor7/4015 is trying to acquire lock:
(&ndev->lock){++--}, at: [<00000000416dce19>] __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
but task is already holding lock:
(&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> fail0verflow#3 (&tbl->lock){++-.}:
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__neigh_create+0x87e/0x1d90 net/core/neighbour.c:528
neigh_create include/net/neighbour.h:315 [inline]
ip6_neigh_lookup+0x9a7/0xba0 net/ipv6/route.c:228
dst_neigh_lookup include/net/dst.h:405 [inline]
rt6_age_examine_exception net/ipv6/route.c:1609 [inline]
rt6_age_exceptions+0x381/0x660 net/ipv6/route.c:1645
fib6_age+0xfb/0x140 net/ipv6/ip6_fib.c:2033
fib6_clean_node+0x389/0x580 net/ipv6/ip6_fib.c:1919
fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1845
fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1893
fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1970
__fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1986
fib6_clean_all net/ipv6/ip6_fib.c:1997 [inline]
fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2053
ndisc_netdev_event+0x3c2/0x4a0 net/ipv6/ndisc.c:1781
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> fail0verflow#2 (rt6_exception_lock){+.-.}:
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:315 [inline]
rt6_flush_exceptions+0x21/0x210 net/ipv6/route.c:1367
fib6_del_route net/ipv6/ip6_fib.c:1677 [inline]
fib6_del+0x624/0x12c0 net/ipv6/ip6_fib.c:1761
__ip6_del_rt+0xc7/0x120 net/ipv6/route.c:2980
ip6_del_rt+0x132/0x1a0 net/ipv6/route.c:2993
__ipv6_dev_ac_dec+0x3b1/0x600 net/ipv6/anycast.c:332
ipv6_dev_ac_dec net/ipv6/anycast.c:345 [inline]
ipv6_sock_ac_close+0x2b4/0x3e0 net/ipv6/anycast.c:200
inet6_release+0x48/0x70 net/ipv6/af_inet6.c:433
sock_release+0x8d/0x1e0 net/socket.c:594
sock_close+0x16/0x20 net/socket.c:1149
__fput+0x327/0x7e0 fs/file_table.c:209
____fput+0x15/0x20 fs/file_table.c:243
task_work_run+0x199/0x270 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x9bb/0x1ad0 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:968
get_signal+0x73a/0x16d0 kernel/signal.c:2469
do_signal+0x90/0x1e90 arch/x86/kernel/signal.c:809
exit_to_usermode_loop+0x258/0x2f0 arch/x86/entry/common.c:162
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
do_syscall_64+0x6ec/0x940 arch/x86/entry/common.c:292
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> fail0verflow#1 (&(&tb->tb6_lock)->rlock){+.-.}:
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:315 [inline]
__ip6_ins_rt+0x56/0x90 net/ipv6/route.c:1007
ip6_route_add+0x141/0x190 net/ipv6/route.c:2955
addrconf_prefix_route+0x44f/0x620 net/ipv6/addrconf.c:2359
fixup_permanent_addr net/ipv6/addrconf.c:3368 [inline]
addrconf_permanent_addr net/ipv6/addrconf.c:3391 [inline]
addrconf_notify+0x1ad2/0x2310 net/ipv6/addrconf.c:3460
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x15d/0x430 net/core/dev.c:6958
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
do_setlink+0xa22/0x3bb0 net/core/rtnetlink.c:2357
rtnl_newlink+0xf37/0x1a50 net/core/rtnetlink.c:2965
rtnetlink_rcv_msg+0x57f/0xb10 net/core/rtnetlink.c:4641
netlink_rcv_skb+0x14b/0x380 net/netlink/af_netlink.c:2444
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4659
netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline]
netlink_unicast+0x4c4/0x6b0 net/netlink/af_netlink.c:1334
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:639
___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
__sys_sendmsg+0xe5/0x210 net/socket.c:2081
SYSC_sendmsg net/socket.c:2092 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2088
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #0 (&ndev->lock){++--}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
pneigh_ifdown net/core/neighbour.c:695 [inline]
neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
other info that might help us debug this:
Chain exists of:
&ndev->lock --> rt6_exception_lock --> &tbl->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&tbl->lock);
lock(rt6_exception_lock);
lock(&tbl->lock);
lock(&ndev->lock);
*** DEADLOCK ***
2 locks held by syz-executor7/4015:
#0: (rtnl_mutex){+.+.}, at: [<00000000a2f16daa>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
fail0verflow#1: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292
stack backtrace:
CPU: 0 PID: 4015 Comm: syz-executor7 Not tainted 4.16.0-rc4+ #277
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_circular_bug.isra.38+0x2cd/0x2dc kernel/locking/lockdep.c:1223
check_prev_add kernel/locking/lockdep.c:1863 [inline]
check_prevs_add kernel/locking/lockdep.c:1976 [inline]
validate_chain kernel/locking/lockdep.c:2417 [inline]
__lock_acquire+0x30a8/0x3e00 kernel/locking/lockdep.c:3431
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
pneigh_ifdown net/core/neighbour.c:695 [inline]
neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes: c757faa ("ipv6: prepare fib6_age() for exception table")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Wei Wang <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Acked-by: Wei Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
tardyp
pushed a commit
to tardyp/switch-linux
that referenced
this issue
May 1, 2018
commit f0295e0 upstream. The current EEH callbacks can race with a driver unbind. This can result in a backtraces like this: EEH: Frozen PHB#0-PE#1fc detected EEH: PE location: S000009, PHB location: N/A CPU: 2 PID: 2312 Comm: kworker/u258:3 Not tainted 4.15.6-openpower1 fail0verflow#2 Workqueue: nvme-wq nvme_reset_work [nvme] Call Trace: dump_stack+0x9c/0xd0 (unreliable) eeh_dev_check_failure+0x420/0x470 eeh_check_failure+0xa0/0xa4 nvme_reset_work+0x138/0x1414 [nvme] process_one_work+0x1ec/0x328 worker_thread+0x2e4/0x3a8 kthread+0x14c/0x154 ret_from_kernel_thread+0x5c/0xc8 nvme nvme1: Removing after probe failure status: -19 <snip> cpu 0x23: Vector: 300 (Data Access) at [c000000ff50f3800] pc: c0080000089a0eb0: nvme_error_detected+0x4c/0x90 [nvme] lr: c000000000026564: eeh_report_error+0xe0/0x110 sp: c000000ff50f3a80 msr: 9000000000009033 dar: 400 dsisr: 40000000 current = 0xc000000ff507c000 paca = 0xc00000000fdc9d80 softe: 0 irq_happened: 0x01 pid = 782, comm = eehd Linux version 4.15.6-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2017.11.2-00008-g4b6188e)) fail0verflow#2 SM P Tue Feb 27 12:33:27 PST 2018 enter ? for help eeh_report_error+0xe0/0x110 eeh_pe_dev_traverse+0xc0/0xdc eeh_handle_normal_event+0x184/0x4c4 eeh_handle_event+0x30/0x288 eeh_event_handler+0x124/0x170 kthread+0x14c/0x154 ret_from_kernel_thread+0x5c/0xc8 The first part is an EEH (on boot), the second half is the resulting crash. nvme probe starts the nvme_reset_work() worker thread. This worker thread starts touching the device which see a device error (EEH) and hence queues up an event in the powerpc EEH worker thread. nvme_reset_work() then continues and runs nvme_remove_dead_ctrl_work() which results in unbinding the driver from the device and hence releases all resources. At the same time, the EEH worker thread starts doing the EEH .error_detected() driver callback, which no longer works since the resources have been freed. This fixes the problem in the same way the generic PCIe AER code (in drivers/pci/pcie/aer/aerdrv_core.c) does. It makes the EEH code hold the device_lock() while performing the driver EEH callbacks and associated code. This ensures either the callbacks are no longer register, or if they are registered the driver will not be removed from underneath us. This has been broken forever. The EEH call backs were first introduced in 2005 (in 77bd741) but it's not clear if a lock was needed back then. Fixes: 77bd741 ("[PATCH] powerpc: PCI Error Recovery: PPC64 core recovery routines") Cc: [email protected] # v2.6.16+ Signed-off-by: Michael Neuling <[email protected]> Reviewed-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
tardyp
pushed a commit
to tardyp/switch-linux
that referenced
this issue
May 1, 2018
…ccess commit a1ae7d0 upstream. This patch fixes the following KASAN complaint: ================================================================== BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x77d/0x9b0 [rdma_rxe] Read of size 8 at addr ffff880061aef860 by task 01/1080 CPU: 2 PID: 1080 Comm: 01 Not tainted 4.16.0-rc3-dbg+ fail0verflow#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 rxe_post_send+0x77d/0x9b0 [rdma_rxe] __ib_drain_sq+0x1ad/0x250 [ib_core] ib_drain_qp+0x9/0x30 [ib_core] srp_destroy_qp+0x51/0x70 [ib_srp] srp_free_ch_ib+0xfc/0x380 [ib_srp] srp_create_target+0x1071/0x19e0 [ib_srp] kernfs_fop_write+0x180/0x210 __vfs_write+0xb1/0x2e0 vfs_write+0xf6/0x250 SyS_write+0x99/0x110 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The buggy address belongs to the page: page:ffffea000186bbc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea000186bbe0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880061aef700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880061aef780: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffff880061aef800: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 f2 f2 f2 f2 ^ ffff880061aef880: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 f2 f2 ffff880061aef900: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 765d677 ("IB: new common API for draining queues") Signed-off-by: Bart Van Assche <[email protected]> Cc: Steve Wise <[email protected]> Cc: Sagi Grimberg <[email protected]> Cc: [email protected] Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I tried plugging in a keyboard through the USB-C port but the Switch doesn't recognize it. Is there any way to type currently without taking over the right joycon I/O?
The text was updated successfully, but these errors were encountered: