diff --git a/Manufacturers.md b/Manufacturers.md index 895d860a..5b1a5819 100644 --- a/Manufacturers.md +++ b/Manufacturers.md @@ -63,6 +63,7 @@ This is the official list of manufacturer ids (`manufacturer_id` in the target c |HEBI|Shenzhen High Energy Bili Co., Ltd.|http://www.coddar.net/| |HENA|Heli-Nation|https://www.heli-nation.com/| |HFOR|HIFIONRC|http://www.hifionrc.com/| +|HGFP|HXW GEEHY FPV|| |HGLR|HGLRC|https://www.hglrc.com/| |HNEC|Huizhou NIDICI Electronic Co., LTD|https://shop.nidici.com/| |HOWI|Hobbywing Technology CO., LTD.|http://hobbywing.com/| diff --git a/configs/GEEHY405/config.h b/configs/GEEHY405/config.h new file mode 100644 index 00000000..ef97cb98 --- /dev/null +++ b/configs/GEEHY405/config.h @@ -0,0 +1,109 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + +#pragma once + +#define FC_TARGET_MCU APM32F405 + +#define BOARD_NAME GEEHY405 +#define MANUFACTURER_ID HGFP + +#define USE_ACC +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P +#define USE_ACC_SPI_ICM42688P +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 +#define USE_BARO +#define USE_BARO_DPS310 + +#define BEEPER_PIN PB9 +#define MOTOR1_PIN PC9 +#define MOTOR2_PIN PC8 +#define MOTOR3_PIN PC7 +#define MOTOR4_PIN PC6 +#define MOTOR5_PIN PB0 +#define MOTOR6_PIN PB1 +#define MOTOR7_PIN PB10 +#define MOTOR8_PIN PB11 +#define LED_STRIP_PIN PB8 +#define UART1_TX_PIN PA9 +#define UART2_TX_PIN PA2 +#define UART3_TX_PIN PC10 +#define UART4_TX_PIN PA0 +#define UART5_TX_PIN PC12 +#define UART1_RX_PIN PA10 +#define UART2_RX_PIN PA3 +#define UART3_RX_PIN PC11 +#define UART4_RX_PIN PA1 +#define UART5_RX_PIN PD2 +#define I2C1_SCL_PIN PB6 +#define I2C1_SDA_PIN PB7 +#define LED0_PIN PC13 +#define LED1_PIN PC14 +#define PINIO1_PIN PC0 +#define SPI1_SCK_PIN PA5 +#define SPI2_SCK_PIN PB13 +#define SPI3_SCK_PIN PB3 +#define SPI1_SDI_PIN PA6 +#define SPI2_SDI_PIN PB14 +#define SPI3_SDI_PIN PB4 +#define SPI1_SDO_PIN PA7 +#define SPI2_SDO_PIN PB15 +#define SPI3_SDO_PIN PB5 +#define ADC_VBAT_PIN PC2 +#define ADC_CURR_PIN PC1 +#define ADC_RSSI_PIN PC3 +#define FLASH_CS_PIN PA15 +#define MAX7456_SPI_CS_PIN PB12 +#define GYRO_1_EXTI_PIN PC4 +#define GYRO_1_CS_PIN PA4 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, PC9 , 1, 0) \ + TIMER_PIN_MAP( 1, PC8 , 1, 0) \ + TIMER_PIN_MAP( 2, PC7 , 1, 0) \ + TIMER_PIN_MAP( 3, PC6 , 1, 0) \ + TIMER_PIN_MAP( 4, PB0 , 1, 0) \ + TIMER_PIN_MAP( 5, PB1 , 1, 0) \ + TIMER_PIN_MAP( 6, PB10, 1, 0) \ + TIMER_PIN_MAP( 7, PB11, 1, 0) \ + TIMER_PIN_MAP( 8, PB8 , 1, -1) + +#define ADC1_DMA_OPT 0 + +#define BARO_I2C_INSTANCE (I2CDEV_1) +#define ADC_INSTANCE ADC1 +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BURST DSHOT_DMAR_AUTO +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC +#define DEFAULT_CURRENT_METER_SCALE 400 +#define BEEPER_INVERTED +#define FLASH_SPI_INSTANCE SPI3 +#define SYSTEM_HSE_MHZ 8 +#define MAX7456_SPI_INSTANCE SPI2 +#define PINIO1_BOX 40 +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW90_DEG +#define GYRO_1_ALIGN_YAW 900 +#define SERIALRX_UART SERIAL_PORT_USART2