Skip to content

Latest commit

 

History

History
138 lines (89 loc) · 3.55 KB

local-lvm.adoc

File metadata and controls

138 lines (89 loc) · 3.55 KB
Raw

Logical Volume Manager (LVM)

Most people install {pve} directly on a local disk. The {pve} installation CD offers several options for local disk management, and the current default setup uses LVM. The installer let you select a single disk for such setup, and uses that disk as physical volume for the Volume Group (VG) pve. The following output is from a test installation using a small 8GB disk:

# pvs
  PV         VG   Fmt  Attr PSize PFree
  /dev/sda3  pve  lvm2 a--  7.87g 876.00m

# vgs
  VG   #PV #LV #SN Attr   VSize VFree
  pve    1   3   0 wz--n- 7.87g 876.00m

The installer allocates three Logical Volumes (LV) inside this VG:

# lvs
  LV   VG   Attr       LSize   Pool Origin Data%  Meta%
  data pve  twi-a-tz--   4.38g             0.00   0.63
  root pve  -wi-ao----   1.75g
  swap pve  -wi-ao---- 896.00m
root

Formatted as ext4, and contains the operation system.

swap

Swap partition

data

This volume uses LVM-thin, and is used to store VM images. LVM-thin is preferable for this task, because it offers efficient support for snapshots and clones.

For {pve} versions up to 4.1, the installer creates a standard logical volume called `data'', which is mounted at `/var/lib/vz.

Starting from version 4.2, the logical volume `data'' is a LVM-thin pool, used to store block based guest images, and `/var/lib/vz is simply a directory on the root file system.

Hardware

We highly recommend to use a hardware RAID controller (with BBU) for such setups. This increases performance, provides redundancy, and make disk replacements easier (hot-pluggable).

LVM itself does not need any special hardware, and memory requirements are very low.

Bootloader

We install two boot loaders by default. The first partition contains the standard GRUB boot loader. The second partition is an EFI System Partition (ESP), which makes it possible to boot on EFI systems.

Creating a Volume Group

Let’s assume we have an empty disk /dev/sdb, onto which we want to create a volume group named ``vmdata''.

Caution
 Please note that the following commands will destroy all existing data on /dev/sdb.

First create a partition.

# sgdisk -N 1 /dev/sdb

Create a Physical Volume (PV) without confirmation and 250K metadatasize.

# pvcreate --metadatasize 250k -y -ff /dev/sdb1

Create a volume group named `vmdata'' on `/dev/sdb1

# vgcreate vmdata /dev/sdb1

Creating an extra LV for /var/lib/vz

This can be easily done by creating a new thin LV.

# lvcreate -n <Name> -V <Size[M,G,T]> <VG>/<LVThin_pool>

A real world example:

# lvcreate -n vz -V 10G pve/data

Now a filesystem must be created on the LV.

# mkfs.ext4 /dev/pve/vz

At last this has to be mounted.

Warning
 be sure that /var/lib/vz is empty. On a default installation it’s not.

To make it always accessible add the following line in /etc/fstab.

# echo '/dev/pve/vz /var/lib/vz ext4 defaults 0 2' >> /etc/fstab

Resizing the thin pool

Resize the LV and the metadata pool can be achieved with the following command.

# lvresize --size +<size[\M,G,T]> --poolmetadatasize +<size[\M,G]> <VG>/<LVThin_pool>
Note
 When extending the data pool, the metadata pool must also be extended.

Create a LVM-thin pool

A thin pool has to be created on top of a volume group. How to create a volume group see Section LVM.

# lvcreate -L 80G -T -n vmstore vmdata