Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

paru itself fails to compile #1281

Closed
pericles256 opened this issue Nov 27, 2024 · 4 comments
Closed

paru itself fails to compile #1281

pericles256 opened this issue Nov 27, 2024 · 4 comments

Comments

@pericles256
Copy link

Affected Version

paru -V
current version 2.0.4

Description

Have you checked previous issues?
Yes, I did not see this issue. I was using the install paru steps listed on github. I am using the arm version of Arch linux on a Radza Rock-5b. The installed failed while executing the makepkg -si step. I have built wezterm from source on this system. That means the rust toolchain is working.

Output

Include the FULL output of any relevant commands/configs
See attached file
paru-makepkg.txt

paru.conf and pacman.conf are usually always relevant
There is not a paru.conf file as it has not been installed.

If this is asking what shell I am using it is zsh but I also tried it with bash.  Same result.
@nPHYN1T3
Copy link

I'm seeing a build fail on 2.0.4 as well but my logs are much different.

Highlights are simply paru lib generated 2 warnings which immediately becomes could not compile paru (caused by) process didn't exit successfully. (cue long rust line I can't copy from VM terminal)

@romanstingler
Copy link

is this still a thing ??

@pericles256
Copy link
Author

Yes , it still fails. I just rerun the build with the following results:

git clone https://aur.archlinux.org/paru.git
Cloning into 'paru'...
hint: Using 'master' as the name for the initial branch. This default branch name
hint: is subject to change. To configure the initial branch name to use in all
hint: of your new repositories, which will suppress this warning, call:
hint:
hint: git config --global init.defaultBranch
hint:
hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and
hint: 'development'. The just-created branch can be renamed via this command:
hint:
hint: git branch -m
remote: Enumerating objects: 188, done.
remote: Counting objects: 100% (188/188), done.
remote: Compressing objects: 100% (132/132), done.
remote: Total 188 (delta 57), reused 187 (delta 56), pack-reused 0 (from 0)
Receiving objects: 100% (188/188), 59.81 KiB | 338.00 KiB/s, done.
Resolving deltas: 100% (57/57), done.
┌─(/aur)────────────────────────────────────────────────────────────────────────────────────────────────────(perryw@rock-5b:pts/2)─┐
└─(11:45:18)──> cd paru ──(Wed,Dec18)─┘
┌─(
/aur/paru)───────────────────────────────────────────────────────────────────────────────────────────────(perryw@rock-5b:pts/2)─┐
└─(11:46:58)──> makepkg -si ──(Wed,Dec18)─┘
==> Making package: paru 2.0.4-1 (Wed Dec 18 11:47:10 2024)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading paru-2.0.4.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 8064k 0 8064k 0 0 2469k 0 --:--:-- 0:00:03 --:--:-- 2848k
==> Validating source files with sha256sums...
paru-2.0.4.tar.gz ... Passed
==> Extracting sources...
-> Extracting paru-2.0.4.tar.gz with bsdtar
==> Starting prepare()...
warning: Patch alpm v3.0.4 (https://github.com/archlinux/alpm.rs?rev=306342#306342ef) was not used in the crate graph.
Patch aur-depends v3.0.0 (https://github.com/Morganamilo/aur-depends?rev=30c2c1#30c2c150) was not used in the crate graph.
Check that the patched package version and available features are compatible
with the dependency requirements. If the patch has a different version from
what is locked in the Cargo.lock file, run cargo update to use the new
version. This may also occur with an optional dependency that is not enabled.
==> Starting build()...
warning: Patch alpm v3.0.4 (https://github.com/archlinux/alpm.rs?rev=306342#306342ef) was not used in the crate graph.
Patch aur-depends v3.0.0 (https://github.com/Morganamilo/aur-depends?rev=30c2c1#30c2c150) was not used in the crate graph.
Check that the patched package version and available features are compatible
with the dependency requirements. If the patch has a different version from
what is locked in the Cargo.lock file, run cargo update to use the new
version. This may also occur with an optional dependency that is not enabled.
Compiling proc-macro2 v1.0.86
Compiling unicode-ident v1.0.13
Compiling libc v0.2.158
Compiling memchr v2.7.4
Compiling autocfg v1.3.0
Compiling cfg-if v1.0.0
Compiling pkg-config v0.3.30
Compiling byteorder v1.5.0
Compiling shlex v1.3.0
Compiling siphasher v0.3.11
Compiling cc v1.1.21
Compiling once_cell v1.19.0
Compiling pin-project-lite v0.2.14
Compiling serde v1.0.210
Compiling quote v1.0.37
Compiling bitflags v2.6.0
Compiling log v0.4.22
Compiling syn v2.0.77
Compiling itoa v1.0.11
Compiling getrandom v0.2.15
Compiling futures-core v0.3.30
Compiling bytes v1.7.2
Compiling rand_core v0.6.4
Compiling slab v0.4.9
Compiling futures-sink v0.3.30
Compiling vcpkg v0.2.15
Compiling phf_shared v0.10.0
Compiling phf_shared v0.11.2
Compiling futures-channel v0.3.30
Compiling futures-task v0.3.30
Compiling futures-io v0.3.30
Compiling pin-utils v0.1.0
Compiling alpm-sys v4.0.0
Compiling equivalent v1.0.1
Compiling hashbrown v0.14.5
Compiling aho-corasick v1.1.3
Compiling crossbeam-utils v0.8.20
Compiling openssl v0.10.66
Compiling foreign-types-shared v0.1.1
Compiling fnv v1.0.7
Compiling adler2 v2.0.0
Compiling signal-hook-registry v1.4.2
Compiling socket2 v0.5.7
Compiling mio v1.0.2
Compiling indexmap v2.5.0
Compiling smallvec v1.13.2
Compiling openssl-sys v0.9.103
Compiling regex-syntax v0.8.4
Compiling tinyvec_macros v0.1.1
Compiling tinyvec v1.8.0
Compiling miniz_oxide v0.8.0
Compiling http v0.2.12
Compiling foreign-types v0.3.2
Compiling tracing-core v0.1.32
Compiling lock_api v0.4.12
Compiling httparse v1.9.4
Compiling percent-encoding v2.3.1
Compiling new_debug_unreachable v1.0.6
Compiling parking_lot_core v0.9.10
Compiling native-tls v0.2.12
Compiling form_urlencoded v1.2.1
Compiling unicode-normalization v0.1.24
Compiling tracing v0.1.40
Compiling unicode-bidi v0.3.15
Compiling try-lock v0.2.5
Compiling thiserror v1.0.63
Compiling scopeguard v1.2.0
Compiling openssl-probe v0.1.5
Compiling idna v0.5.0
Compiling want v0.3.1
Compiling http-body v0.4.6
Compiling regex-automata v0.4.7
Compiling crc32fast v1.4.2
Compiling encoding_rs v0.8.34
Compiling lazy_static v1.5.0
Compiling temp-dir v0.1.13
Compiling mac v0.1.1
Compiling httpdate v1.0.3
Compiling serde_json v1.0.128
Compiling zerocopy-derive v0.7.35
Compiling serde_derive v1.0.210
Compiling tokio-macros v2.4.0
Compiling futures-macro v0.3.30
Compiling zerocopy v0.7.35
Compiling tokio v1.40.0
Compiling futures-util v0.3.30
Compiling openssl-macros v0.1.1
Compiling ppv-lite86 v0.2.20
Compiling rand_chacha v0.3.1
Compiling rand v0.8.5
Compiling phf_generator v0.10.0
Compiling phf_generator v0.11.2
Compiling phf_macros v0.11.2
Compiling phf_codegen v0.11.2
Compiling string_cache_codegen v0.5.2
Compiling regex v1.10.6
Compiling phf v0.11.2
Compiling thiserror-impl v1.0.63
Compiling ryu v1.0.18
Compiling tokio-util v0.7.12
Compiling h2 v0.3.26
Compiling precomputed-hash v0.1.1
Compiling tower-service v0.3.3
Compiling tokio-native-tls v0.3.1
Compiling markup5ever v0.12.1
Compiling phf_codegen v0.10.0
Compiling url v2.5.2
Compiling futf v0.1.5
Compiling gettext-sys v0.21.4
Compiling flate2 v1.0.33
Compiling parking_lot v0.12.3
Compiling alpm v4.0.1
Compiling version_check v0.9.5
Compiling utf-8 v0.7.6
Compiling dtoa v1.0.9
Compiling either v1.13.0
Compiling unicode-width v0.1.14
Compiling base64 v0.21.7
Compiling rustix v0.38.37
Compiling rustls-pemfile v1.0.4
Compiling tokio-socks v0.5.2
Compiling ahash v0.8.11
Compiling dtoa-short v0.3.5
Compiling string_cache v0.8.7
Compiling tendril v0.4.3
Compiling async-compression v0.4.12
Compiling selectors v0.25.0
Compiling serde_urlencoded v0.7.1
Compiling html5ever v0.27.0
Compiling cssparser-macros v0.6.1
Compiling crossbeam-epoch v0.9.18
Compiling num-traits v0.2.19
Compiling utf8parse v0.2.2
Compiling mime v0.3.17
Compiling cfg_aliases v0.1.1
Compiling ipnet v2.10.0
Compiling cini v1.0.0
Compiling stable_deref_trait v1.2.0
Compiling gimli v0.31.0
Compiling sync_wrapper v0.1.2
Compiling linux-raw-sys v0.4.14
Compiling portable-atomic v1.7.0
Compiling fxhash v0.2.1
Compiling servo_arc v0.3.0
Compiling pacmanconf v3.0.0
Compiling crossbeam-deque v0.8.5
Compiling nix v0.28.0
Compiling anstyle-parse v0.2.5
Compiling cssparser v0.31.2
Compiling hyper v0.14.30
Compiling addr2line v0.24.1
error[E0308]: mismatched types
--> /home/perryw/.cargo/registry/src/index.crates.io-6f17d22bba15001f/alpm-4.0.1/src/cb.rs:244:60
|
244 | unsafe { alpm_option_set_logcb(self.as_ptr(), Some(cb), &*ctx as *const _ as *mut _) };
| ---- ^^ expected fn pointer, found fn item
| |
| arguments to this enum variant are incorrect
|
= note: expected fn pointer unsafe extern "C" fn(_, _, _, *mut __va_list_tag)
found fn item extern "C" fn(_, _, _, [__va_list_tag; 1]) {logcb::<LogCbImpl<T, F>>}
help: the type constructed contains extern "C" fn(*mut c_void, u32, *const u8, [__va_list_tag; 1]) {logcb::<LogCbImpl<T, F>>} due to the type of the argument passed
--> /home/perryw/.cargo/registry/src/index.crates.io-6f17d22bba15001f/alpm-4.0.1/src/cb.rs:244:55
|
244 | unsafe { alpm_option_set_logcb(self.as_ptr(), Some(cb), &*ctx as *const _ as *mut _) };
| ^^^^^--^
| |
| this argument influences the type of Some
note: tuple variant defined here
--> /home/perryw/.rustup/toolchains/stable-aarch64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/option.rs:579:5
|
579 | Some(#[stable(feature = "rust1", since = "1.0.0")] T),
| ^^^^

Compiling serde_spanned v0.6.7
For more information about this error, try rustc --explain E0308.
error: could not compile alpm (lib) due to 1 previous error
warning: build failed, waiting for other jobs to finish...
==> ERROR: A failure occurred in build().
Aborting...

@Morganamilo
Copy link
Owner

Current version doesn't like arm. See #1154

It's fixed in git so either use paru-git or modify the pkgbuild to use the generate feature as shown in the above issue.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

4 participants