From f72434f0be7eadc3f3018c00f9ff8566421b2d72 Mon Sep 17 00:00:00 2001
From: Dominic Clifton <me@dominicclifton.name>
Date: Sun, 14 Apr 2024 23:23:44 +0200
Subject: [PATCH] SPRacingH7NEO - Initial target support.

---
 RX/SPRacing H7NEO 2400 True Diversity RX.json | 68 +++++++++++++++++++
 targets.json                                  | 14 ++++
 2 files changed, 82 insertions(+)
 create mode 100644 RX/SPRacing H7NEO 2400 True Diversity RX.json

diff --git a/RX/SPRacing H7NEO 2400 True Diversity RX.json b/RX/SPRacing H7NEO 2400 True Diversity RX.json
new file mode 100644
index 0000000..9875c8a
--- /dev/null
+++ b/RX/SPRacing H7NEO 2400 True Diversity RX.json	
@@ -0,0 +1,68 @@
+{
+    "//": "GPIO Matrix Indexes, 0 = GPIO0, *not* 0 = pin 0",
+
+    "//": "BUTTON",
+    "//": "GPIO0 Strapping - Default: Pull-up - Button pressed pulls-down",
+    "button": 0,
+
+    "//": "SERIAL",
+    "serial_tx": 43,
+    "serial_rx": 44,
+
+    "//": "RADIO (2x 2.4Ghz + 2x PA)",
+
+    "//": "Single inductor fitted to first SX1280",
+    "radio_dcdc": true,
+
+    "//": "Radio SPI uses SUBSPI pins",
+    "radio_miso": 13,
+    "radio_mosi": 11,
+    "radio_sck": 12,
+
+    "//": "NRESET is active-low with 50k pull-up in SX1280",
+    "radio_rst": 9,
+    "radio_rst_2": 46,
+
+    "radio_busy": 7,
+    "radio_busy_2": 5,
+    "radio_dio1": 6,
+    "radio_dio1_2": 4,
+
+    "//": "NSS is active-low, SX1280 MISO is high-impedance when NSS is high.",
+    "//": "NSS 1/2 on SUBSPI pins with CS0/CS1 signals (respectively)",
+    "radio_nss": 10,
+    "radio_nss_2": 8,
+
+    "//": "On the RFX2401C RX active is FALSE when TXEN is HIGH/ON",
+    "power_txen": 14,
+    "power_txen_2": 45,
+
+    "//": "Unused RXEN, pull-ups fitted to both PAs, TXEN HIGH disables RX",
+    "_power_rxen": "N/A",
+    "_power_rxen_2": "N/A",
+
+    "power_lna_gain": 12,
+    "power_min": 0,
+    "power_high": 3,
+    "power_max": 3,
+    "power_default": 3,
+    "power_control": 0,
+    "power_values": [-10,-6,-3,1],
+
+    "//": "PWM",
+    "//": "PWM outputs on 4 pins which double as JTAG pins, on S3 JTAG pins are not strapping pins, no buffers needed!",
+    "//": "GPIO3 is pulled low via 10k resistor (located by IO_1 legend), which selects USB as the JTAG signal source",
+    "//": "See 8.5 JTAG Signal Source Control",
+    "//": "J15:6 - GPIO41/MTDI - JTAG 1/4",
+    "//": "J15:5 - GPIO42/MTMS - JTAG 2/4",
+    "//": "J15:4 - GPIO39/MTCK - JTAG 3/4",
+    "//": "J15:3 - GPIO40/MTDO - JTAG 4/4",
+    "pwm_outputs":[41,42,40,39],
+
+    "//": "LED",
+    "led_rgb": 38,
+    "led_rgb_isgrb": true,
+    "ledidx_rgb_status": [0],
+    "ledidx_rgb_vtx": [1],
+    "ledidx_rgb_boot": [0,1]
+}
diff --git a/targets.json b/targets.json
index 74554a6..19bbba3 100644
--- a/targets.json
+++ b/targets.json
@@ -2428,6 +2428,20 @@
             }
         }
     },
+    "spracing": {
+        "name": "SPRacing",
+        "rx_2400": {
+            "h7neo": {
+                "product_name": "SPRacingH7NEO 2.4GHz FC True Diversity RX (H7/S3)",
+                "lua_name": "SPR_H7NEO_S3",
+                "layout_file": "SPRacing H7NEO 2400 True Diversity RX.json",
+                "upload_methods": ["uart", "wifi", "betaflight"],
+                "platform": "esp32-s3",
+                "min_version": "3.3.0",
+                "firmware": "Unified_ESP32S3_2400_RX"
+            }
+        }
+    },
     "atomrc": {
         "name": "atomrc",
         "rx_2400": {