Changelog Manager CLI Tool

Compiles the change files into CHANGELOG.md

🌱 Introduction

Changelog Manager is a helper CLI tool that uses files (in the rest of the documentation called change files) describing changes to fill out the CHANGELOG.md file.

Tool automatically determines the next application's semantic version based on the current CHANGELOG.md file and the change files generated in the changes directory.

These files can be generated in the following ways:

using our CLI helper
using our Visual Studio extension
using our Visual Studio Code extension
manually. This is not recommended as the user creating these can be prone to error.

Tool then builds a section representing the newly determined semantic version containing the changes from these files. The section is inserted above the latest changelog entry and its heading is formatted as:

[<semantic_version>] - yyyy-MM-dd

Important note. As it currently stands, the helper is inserting the newly compiled section above the latest changelog entry. So, the CHANGELOG.md file needs to contain atleast

_NOTE: This is an automatically generated file. Do not modify contents of this file manually._

## [Unreleased]

For the convenience of using this tool to manage a changelog in an automated CI/CD environment we made a GitHub Action and an Azure DevOps extension! No need for running this manually!

📖 Table of contents

🌱 Introduction
📝 Usage
🤔 What are these change files?
⚙️ Configuration file
📤 Result / Output
🏗 Development
☎️ Support
🪪 License

📝 Usage

Firstly, you can use our GitHub Releases tab to start using our tool. Link contains pre-built binaries for Windows and Linux, as well as Visual Studio extension which is also available on the Visual Studio Marketplace.

In general, the helper takes two arguments and one optional input:

changelog location - required
changes location - required
set version flag with the optional project file path - optional (prefixed with either -sv or --set-version)

Example of a call:

clm [options] <changelog_location> <changes_location>

Arguments:

changelog_location:
- Directory location containing the CHANGELOG.md, and possibly, the configuration .changelog.json file
- Can be either an absolute or a relative path
changes_location
- Directory location containing the changes.
- Can be either an absolute or a relative path

Options:

-v | --version:
- Shows version information.
-sv | --set-version[:<PROJECT_FILE_PATH>]:
- Should the new application's version be set in the appropriate project file.
- If set without a file path, the helper will try to automatically determine the project file.
- Currently supported project types:
  - NPM (package.json)
  - .NET SDK (.csproj with the Version (case-insensitive) tag)
- Can be either an absolute or a relative path
-? | -h | --help:
- Shows help information.

Example

Let's say that your system directory structure looks something like this:

C
├── Projects                
│   ├── ExampleProject          
│   │   ├── ...
│   │   ├── ExampleProject.Application
|   |   |   ├── ...
|   |   |   └── ExampleProject.Application.csproj (contains the application's 'Version' (case-insensitive) tag)
│   │   ├── ExampleProject.Domain
│   │   ├── ExampleProject.API
│   │   ├── changes (directory containing the generated change files)
│   │   │   └── ...
│   │   ├── README.md
│   │   ├── package.json (contains the application's version information)
│   │   ├── CHANGELOG.md
│   │   └── .changelog.json (optional configuration file)
│   └── ...
└── ...

As previously said, the helper takes two arguments and one optional input:

directory location containing the CHANGELOG.md, and possibly, the configuration .changelog.json file
- in this case C:\Projects\ExampleProject
directory location containing the changes
- in this case C:\Projects\ExampleProject\changes

If you want to opt-out of automatically bumping the project file, you would call the helper as follows:

clm C:\Projects\ExampleProject C:\Projects\ExampleProject\changes

If you want to opt-in to automatically bumping the project file, you would call the helper as follows:

clm C:\Projects\ExampleProject C:\Projects\ExampleProject\changes --set-version (or -sv)

the helper will try to look for the correct project file in the same directory where the helper is running. In this case it will find the package.json and set its version key value to the new application's version.

If you want to explicitly pass the path to the project file that needs to be bumped, you would call the helper as follows:

clm C:\Projects\ExampleProject C:\Projects\ExampleProject\changes -sv:C:\Projects\ExampleProject\ExampleProject.Application\ExampleProject.Application.csproj

in this case the helper will find the ExampleProject.Application.csproj and set its Version (case-insensitive) tag value to the new application's version.

As mentioned earlier, you could have used relative paths instead of an absolute ones in each of these previous helper calls. Assuming you are positioned inside C:\Projects\ExampleProject, the last call where the project file was explicitly passed in would look like:

clm . .\changes -sv:.\ExampleProject.Application\ExampleProject.Application.csproj

🤔 What are these change files?

Change files are just files located in the changes directory with the following naming scheme:

<change_type> [<change_category>] <change_description>

Acceptable entries for the <change_type> are:

Added
Changed
Deprecated
Removed
Fixed
Security

This decision was inspired by following the principles for keeping a good changelog.

[<change_category>] part of the naming is controlled and validated using the .changelog.json configuration file.

To avoid incorrect naming and to ease this file creation process on the developer, following helper tools were created:

Visual Studio extension
Visual Studio Code extension
CLI helper

⚙ Configuration file

.changelog.json is an optional JSON file. It specifies which change categories are allowed in your project. File needs to be located in the same directory alongside the appropriate CHANGELOG.md file.

If we wanted to allow only 3 different change categories: API, FE (Frontend) and BE (Backend), the configuration would look like:

{
  "categories": [
    "API",
    "FE",
    "BE"
  ]
}

If the configuration exists, helper will ignore every change in the changes directory that does not concur to it. On the other hand, if the configuration file does not exist, every change will be accepted and written to the CHANGELOG.md.

Default bumping rule

Another important feature that can be configured and overwritten by using the configuration file is the default bumping rule.

Default rules that apply when determining the application's next semantic version:

Change type	Bump major	Bump minor	Bump patch
Deprecated	❌	✅	❌
Added	❌	✅	❌
Changed	❌	✅	❌
Removed	❌	✅	❌
(no changes)	❌	✅	❌
Fixed	❌	❌	✅
Security	❌	❌	✅
Change description containing words `BREAKING CHANGE` (case-insensitive)	✅	❌	❌

You are free to overwrite these defaults by using the configuration file and updating it in the following way:

{
  "categories": [
    "API",
    "FE",
    "BE"
  ],
  // This bumping rule configuration is equivalent to the default behaviour.
  "bumpingRule": {
    "major": [],
    "minor": [
      "Added",
      "Changed",
      "Deprecated"
      "Removed",
      "NoChanges"
    ],
    "patch": [
      "Fixed",
      "Security"
    ],
    "breakingKeyword": "BREAKING CHANGE"  // this is case-insensitive
  }
}

Important note. The naming is case-sensitive.

📤 Result / Output

If the changes directory or the CHANGELOG.md file does not exist, application will log the error to the Console Error output (stderr) and stop with the execution.

Otherwise, appropriate section will be inserted in the CHANGELOG.md file and the change files that were used to build the new changelog section from the changes directory will be deleted.

Application logs the newly bumped semantic version to the Console Standard output (stdout).

🏗 Development

Publishing

dotnet publish -c release -r win-x64 -p:PublishSingleFile=true
dotnet publish -c release -r linux-x64 -p:PublishSingleFile=true

☎ Support

If you are having problems, please let us know by raising a new issue.

🪪 License

This project is licensed with the MIT License.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Changelog Manager CLI Tool

🌱 Introduction

📖 Table of contents

📝 Usage

Example

🤔 What are these change files?

⚙ Configuration file

Default bumping rule

📤 Result / Output

🏗 Development

Publishing

☎ Support

🪪 License

Files

README.md

Latest commit

History

README.md

File metadata and controls

Changelog Manager CLI Tool

🌱 Introduction

📖 Table of contents

📝 Usage

Example

🤔 What are these change files?

⚙ Configuration file

Default bumping rule

📤 Result / Output

🏗 Development

Publishing

☎ Support

🪪 License